Karosa B 952
| Karosa B952 | |
|---|---|
.jpg) Karosa B952 in Beroun, Czech Republic | |
| Overview | |
| Manufacturer | Karosa |
| Body and chassis | |
| Doors | 3, air-operated |
| Floor type | High-floor |
| Chassis | semi-self-supporting with frame |
| Powertrain | |
| Engine | Iveco Cursor 8 Euro III |
| Capacity | 31 sitting/68 standing |
| Power output | 210 kW |
| Transmission | ZF 6-speed manual |
| Dimensions | |
| Length | 11320 mm |
| Width | 2500 mm |
| Height | 3165 mm |
| Curb weight | 9820kg - 10500 kg |
| Chronology | |
| Predecessor | Karosa B 932 |
| Successor | Irisbus Citelis |
Karosa B 952 is an urban bus produced by bus manufacturer Karosa from the Czech Republic, in the years of 2002 to 2006. Modernised version B952E was introduced in 2003.
Construction features
Karosa B 952 is model of Karosa 900 series. B 952 is unified with city bus models such as B 951 and B 961. Body was assembled to the skeleton, which has undergone a dip stage, sheets were galvanized and painted and then to have it installed additional components. Body is semi-self-supporting with frame and engine with manual gearbox is placed in the rear part. Only rear axle is propulsed. Front and rear axles are solid. All axles are mounted on air suspension. On the right side are three doors (first are narrower than middle doors). Inside are used plastic Vogelsitze or Ster seats. Drivers cab is separated from the rest of the vehicle with glazed partition. In the middle part is room for a pram or wheelchair.
Production and operation
In 2002 started serial production, which continued until 2006. Since 2003 were buses produced only modernised version B 951 E, which had glass glued to skeleton, instead of glass mounted in rubber and better ventilation of the engine compartment.
Historical vehicles
Any historical vehicle was not saved yet.
See also
 |
Wikimedia Commons has media related to Karosa B 952. |
| ||||||||||||||||||||||