Kalamunda Zig Zag

View from the Zig Zag railway c1920.
Statham Quarry switch point
Gradient profile map

The Kalamunda Zig Zag was completed in 1891, as part of the Upper Darling Range Railway line in Western Australia which was built by the Canning Jarrah Timber Company to supply railway sleepers to Perth's growing railway system.

Sections

The sections of the railway that made up the zig zag: -

  1. Ridge Hill (lower section of Zig Zag)
  2. Bottom Points
  3. Statham's Quarry [known also as Perth City Council Siding (from 1920) ]
  4. Number 3 Points
  5. Top Points (upper section of Zig Zag)

The line was so steep (1 in 30 grade), that the engine would alternate between pushing and pulling the load.

The Zig Zag has since been converted into a scenic, narrow bitumen road. The road is one-way for most of the Zig Zag, and is not recommended for hiking.

Events

Every year the Shire of Kalamunda holds a Zig Zag Walk event, in which the Zig Zag is closed to all but pedestrians, providing people with the opportunity to admire the views and see the area's wildflowers; the Zig Zag is a part of the Darling Range Regional Park. The Zig Zag Walk occurs around early October every year. On the last Sunday of October each year, there is a community Arts Festival called the Zig Zag Festival held in Stirk Park Kalamunda.

The Zig Zag is also used as a stage in the Targa West Rally. The road is closed to all traffic and the stage is run in reverse road direction, from the bottom to the top.

There have been moves by enthusiasts to resurrect the rail line on the Zig Zag formation, and the Kalamunda council in principle did not object to the project.

See also

References

External links

Coordinates: 31°56′23″S 116°2′46″E / 31.93972°S 116.04611°E