John Miller (entrepreneur)

John A. Miller (born August John Mueller in 1872, Homewood, Illinois - died June 24, 1941, Houston, Texas) was an American roller coaster designer and builder, inventor, and businessman. Having patented over 100 ^[1] key roller coaster components, he is considered to be the "father of the modern high-speed roller coaster."^[2] During his lifetime, he designed (singularly or with a partner) nearly 140 coasters^[3] and remained a mentor and key business partner to other coaster designers, including Harry C. Baker and John C. Allen.

Biography

Early life

Miller was born in Homewood Illinois and worked as a coaster builder at a very early age.^[2] At the age of 19, he started working with La Marcus Thompson and went on to serve as Thompson's chief engineer.^[2] By 1911, he was working as a consultant to the Philadelphia Toboggan Company^[4] He also worked with noted designers Frederick Ingersoll and Fred and Josiah Pearce.^[5]

Miller in 1910 designed a device that prevented cars from rolling backward down the lift hill in the event of pull chain breakage. It attached to the track and clicked onto the rungs of the chain. Known as the safety chain dog, or safety ratchet, it evolved into the device on the underside of cars that makes that distinctive clinkety-clank sound of wooden coasters.

A roller coaster wheel assembly. The underfriction wheels are on the bottom. The three sets of wheels clamp onto the track.

Miller's most important contribution to coaster technology, though, was the underfriction wheel. In 1919,^[6] he patented the "Miller Under Friction Wheel," also called the "upstop wheel," which consisted of a wheel that ran under the track to keep the coaster cars from flying off. This allowed the designers to use very steep drops, sharp horizontal and vertical curves and high speeds.^[1] These are found on nearly every roller coaster in operation.^[5]

Miller & Baker

Besides patenting ingenious inventions for coasters—including several types of brakes and car bar locks—Miller built his share of unusual "scream machines." In 1920 Miller went into business with Harry C. Baker as "Miller & Baker, Inc." and over the next three years, they built popular coasters all over North America. Characteristics of their roller coasters are camelback hills (multiple straight or slightly angled drops that went all the way to the ground) and large, flat turns.^[1]

Miller & Baker built other types of amusement rides and structures as well. In addition to coasters, the firm constructed mill chutes, and domed roof buildings for carousels and dance pavilions.^[7]

The John Miller Company

After 1923, Miller continued to design and build coasters for his own company, "The John Miller Company." The Dip-Lo-Docus (c. 1923), billed as "The Jazz Ride," featured revolving three-seater cars, whereas the Flying Turns (1929) consisted of cars with swiveling rubber wheels tearing through a half-cylindrical chute like a toboggan. The legendary Cyclone (1928-1958) at Puritas Springs near Cleveland, Ohio was honored with a place on the Smithsonian Institution's list of Great Lost Roller Coasters. It was hidden so much by foliage that only the boarding platform was visible to riders before they began to race through the ravine. This 1928 ride was considered one of the golden-age classics of the period.^[1]

Later life

Although many of his most famous coasters were built during the 1920s, Miller never stopped building coasters. He continued to travel to supervise site installations and consult on roller coaster design until his death. He died on June 24, 1941, while working on a coaster project in Houston, Texas, at the age of 69.^[5] He is interred in the Homewood Memorial Gardens in Homewood, IL.^[8]

Coasters

During his lifetime, Miller designed or contributed to the design of nearly 140 roller coasters, including the following^[3]

Patents

References

External links

• John A. Miller site