Jim Williams (analog designer)
| Jim Williams | |
|---|---|
| Born | April 14, 1948 |
| Died |
June 12, 2011 (aged 63) California |
| Nationality | American |
| Occupation | Electronics engineer |
James M. "Jim" Williams (April 14, 1948 – June 12, 2011) was an analog circuit designer and technical author who worked for the Massachusetts Institute of Technology (1968–1979), Philbrick, National Semiconductor (1979–1982) and Linear Technology Corporation (LTC) (1982–2011).[1] He suffered a stroke on June 10 and died on June 12, 2011.[2]
He wrote over 350 publications[3] relating to analog circuit design, including 5 books, 21 application notes for National Semiconductor, 62 application notes for Linear Technology, and over 125 articles for EDN Magazine.
Bibliography (partial)
- Williams, Jim (Aug 1984), Understanding and applying the LT1005 multifunction regulator, Application Note 1, Linear Technology Corp
- Williams, Jim (Sep 1987), Switching regulators for poets: A gentle guide for the trepidatious, Application Note 25, Linear Technology Corp
- Williams, Jim (Feb 1988), Thermocouple measurement, Application Note 28, Linear Technology Corp
- Williams, Jim (June 1990), Bridge circuits: Marrying gain and balance, Application Note 43, Linear Technology Corp
- Williams, Jim, ed. (1991), Analog Circuit Design: Art, Science and Personalities, The EDN Series for Design Engineers, Butterworth-Heinemann, ISBN 978-0-7506-9640-1
- Williams, Jim (Aug 1991), High speed amplifier techniques, Application Note 47, Linear Technology Corp
- Williams, Jim, ed. (1995), The Art and Science of Analog Circuit Design, The EDN Series for Design Engineers, Butterworth–Heinemann, ISBN 0-7506-9505-6,
MIT building 20 at 3:00 A.M./ Tek. 547, pizza, breadboard./ That's Education.
- Williams, Jim (Nov 1995), A fourth generation of LCD backlight technology, Application Note 65, Linear Technology Corp
- Williams, Jim (Sep 1999), 30 nanosecond settling time measurement for a precision wideband amplifier, Application Note 79, Linear Technology Corp
- Williams, Jim (May 2003), Slew rate verification for wideband amplifiers: The taming of the slew, Application Note 94, Linear Technology Corp
- Williams, Jim (Mar 2010), 1ppm settling time measurement for a monolithic 18-bit DAC: When does the last angel stop dancing on a speeding pinhead?, Application Note 120, Linear Technology Corp
- Williams, Jim (Apr 2011), An introduction to acoustic thermometry, Application Note 131, Linear Technology Corp
For a complete bibliography, see.[3]
See also
- Paul Brokaw
- Barrie Gilbert
- Howard Johnson (electrical engineer)
- Bob Pease — analog electronics engineer, technical author, and colleague. Pease died in an automobile accident after leaving Williams' memorial.[4]
- Bob Widlar — pioneering analog integrated circuit designer, technical author, early consultant to Linear Technology Corporation
- Building 20 — legendary MIT building where Jim Williams had a design lab early in his career
References
- ↑ Williams, Jim, ed. (1991), Analog Circuit Design: Art, Science, and Personalities, Butterworth-Heinemann, p. xi
- ↑ Rako, Paul (June 13, 2011), Analog guru Jim Williams dies after stroke, EDN
- ↑ 3.0 3.1 Lundberg, Kent (July 31, 2011), A Bibliography of Jim Williams, MIT
- ↑ Rako, Paul (June 20, 2011), Analog engineering legend Bob Pease killed in car crash, EDN
External links
- Archive of EDN articles.
- Video on how to measure temperature acoustically using a vintage TEK scope on YouTube.
- http://www.centredaily.com/2011/06/15/2779140/linear-technology-staff-scientist.html[]
- Linear Technology - Staff Scientist Jim Williams Remembered
- Walker, Rob (2006). Interview with Bob Dobkin and Jim Williams (part of Stanford and the Silicon Valley Project). Recorded April 19, 2006.