Isotopes of cobalt

Naturally occurring cobalt (Co) is composed of 1 stable isotope, ⁵⁹Co. 28 radioisotopes have been characterized with the most stable being ⁶⁰Co with a half-life of 5.2714 years, ⁵⁷Co with a half-life of 271.8 days, ⁵⁶Co with a half-life of 77.27 days, and ⁵⁸Co with a half-life of 70.86 days. All of the remaining radioactive isotopes have half-lives that are less than 18 hours and the majority of these have half-lives that are less than 1 second. This element also has 11 meta states, all of which have half-lives less than 15 minutes.

The isotopes of cobalt range in atomic weight from ⁴⁷Co to ⁷⁵Co. The primary decay mode for isotopes with atomic mass unit values less than that of the most abundant stable isotope, ⁵⁹Co, is electron capture and the primary mode of decay for those of greater than 59 atomic mass units is beta decay. The primary decay products before ⁵⁹Co are iron isotopes and the primary products after are nickel isotopes.

Radioactive isotopes can be produced by various nuclear reactions. For example, the isotope ⁵⁷Co is produced by cyclotron irradiation of iron. The principal reaction involved is the (d,n) reaction ⁵⁶Fe + ²H → n + ⁵⁷Co.^[1]

Standard atomic mass: 58.933195(5) u

Use of cobalt radioisotopes in medicine

Cobalt-60 (Co-60 or ⁶⁰Co) is a radioactive metal that is used in radiotherapy. It produces two gamma rays with energies of 1.17 MeV and 1.33 MeV. The ⁶⁰Co source is about 2 cm in diameter and as a result produces a geometric penumbra, making the edge of the radiation field fuzzy. The metal has the unfortunate habit of producing a fine dust, causing problems with radiation protection. The ⁶⁰Co source is useful for about 5 years but even after this point is still very radioactive, and so cobalt machines have fallen from favor in the Western world where linacs are common.

Cobalt-57 (Co-57 or ⁵⁷Co) is a radioactive metal that is used in medical tests; it is used as a radiolabel for vitamin B₁₂ uptake. It is useful for the Schilling test.^[2]

Industrial uses for radioactive isotopes

Cobalt-60 (Co-60 or ⁶⁰Co) is useful as a gamma ray source because it can be produced—in predictable quantity, and high activity—by simply exposing natural cobalt to neutrons in a reactor for a given time. It is used for

• sterilization of medical supplies, and medical waste;
• radiation treatment of foods for sterilization (cold pasteurization);
• industrial radiography (e.g., weld integrity radiographs);
• density measurements (e.g., concrete density measurements); and
• tank fill height switches.

Cobalt-57 is used as a source in Mössbauer spectroscopy of iron-containing samples. The electron capture decay of the ⁵⁷Co forms an excited state of the ⁵⁷Fe nucleus, which in turn decays to the ground state with emission of a gamma ray. Measurement of the gamma ray spectrum provides information about the chemical state of the iron atom in the sample.

Table

1. ↑ Abbreviations:
   EC: Electron capture
   IT: Isomeric transition
2. ↑ Bold for stable isotopes

Notes

• Values marked # are not purely derived from experimental data, but at least partly from systematic trends. Spins with weak assignment arguments are enclosed in parentheses.
• Uncertainties are given in concise form in parentheses after the corresponding last digits. Uncertainty values denote one standard deviation, except isotopic composition and standard atomic mass from IUPAC which use expanded uncertainties.
• Nuclide masses are given by IUPAP Commission on Symbols, Units, Nomenclature, Atomic Masses and Fundamental Constants (SUNAMCO)
• Isotope abundances are given by IUPAC Commission on Isotopic Abundances and Atomic Weights

References

• Isotope masses from:
  • G. Audi, A. H. Wapstra, C. Thibault, J. Blachot and O. Bersillon (2003). "The NUBASE evaluation of nuclear and decay properties". Nuclear Physics A 729: 3–128. Bibcode:2003NuPhA.729....3A. doi:10.1016/j.nuclphysa.2003.11.001. 
• Isotopic compositions and standard atomic masses from:
  • J. R. de Laeter, J. K. Böhlke, P. De Bièvre, H. Hidaka, H. S. Peiser, K. J. R. Rosman and P. D. P. Taylor (2003). "Atomic weights of the elements. Review 2000 (IUPAC Technical Report)". Pure and Applied Chemistry 75 (6): 683–800. doi:10.1351/pac200375060683. 
  • M. E. Wieser (2006). "Atomic weights of the elements 2005 (IUPAC Technical Report)". Pure and Applied Chemistry 78 (11): 2051–2066. doi:10.1351/pac200678112051. Lay summary. 
• Half-life, spin, and isomer data selected from the following sources. See editing notes on this article's talk page.
  • G. Audi, A. H. Wapstra, C. Thibault, J. Blachot and O. Bersillon (2003). "The NUBASE evaluation of nuclear and decay properties". Nuclear Physics A 729: 3–128. Bibcode:2003NuPhA.729....3A. doi:10.1016/j.nuclphysa.2003.11.001. 
  • National Nuclear Data Center. "NuDat 2.1 database". Brookhaven National Laboratory. Retrieved September 2005. 
  • David R. Lide (ed.), orman E. Holden in CRC Handbook of Chemistry and Physics, 85th Edition, online version. CRC Press. Boca Raton, Florida (2005). Section 11, Table of the Isotopes.

Isotopes of the chemical elements
1 H																	2 He
3 Li	4 Be											5 B	6 C	7 N	8 O	9 F	10 Ne
11 Na	12 Mg											13 Al	14 Si	15 P	16 S	17 Cl	18 Ar
19 K	20 Ca	21 Sc	22 Ti	23 V	24 Cr	25 Mn	26 Fe	27 Co	28 Ni	29 Cu	30 Zn	31 Ga	32 Ge	33 As	34 Se	35 Br	36 Kr
37 Rb	38 Sr	39 Y	40 Zr	41 Nb	42 Mo	43 Tc	44 Ru	45 Rh	46 Pd	47 Ag	48 Cd	49 In	50 Sn	51 Sb	52 Te	53 I	54 Xe
55 Cs	56 Ba		72 Hf	73 Ta	74 W	75 Re	76 Os	77 Ir	78 Pt	79 Au	80 Hg	81 Tl	82 Pb	83 Bi	84 Po	85 At	86 Rn
87 Fr	88 Ra		104 Rf	105 Db	106 Sg	107 Bh	108 Hs	109 Mt	110 Ds	111 Rg	112 Cn	113 Uut	114 Fl	115 Uup	116 Lv	117 Uus	118 Uuo
		57 La	58 Ce	59 Pr	60 Nd	61 Pm	62 Sm	63 Eu	64 Gd	65 Tb	66 Dy	67 Ho	68 Er	69 Tm	70 Yb	71 Lu
		89 Ac	90 Th	91 Pa	92 U	93 Np	94 Pu	95 Am	96 Cm	97 Bk	98 Cf	99 Es	100 Fm	101 Md	102 No	103 Lr
Table of nuclides Categories: Isotopes Tables of nuclides Metastable isotopes Isotopes by element