Internet Gateway Device Protocol

Diagram of the UPnP's discovery phase

Internet Gateway Device (IGD) Standardized Device Control Protocol is a NAT Port Mapping Protocol (NAT-PMP)[1] and is supported by an increasing number of NAT routers. It is a common communications protocol of automatically configuring port forwarding. It is part of an ISO/IEC Standard [2] rather than an Internet Engineering Task Force standard.

Usage

Applications using peer-to-peer networks, multiplayer gaming, and remote assistance programs need a way to communicate through home and business gateways. Without IGD one has to manually configure the gateway to allow traffic through, a process which is error prone and time consuming. Universal Plug and Play (UPnP) comes with a solution for network address translation traversal.

IGD makes it easy to do the following:

The host can allow to seek for available devices on the network via SSDP which can be controlled then with the help of a network protocol as SOAP. A seek request is sent via HTTP and port 1900 to the multicast address 239.255.255.250:

M-SEARCH * HTTP/1.1
Host:239.255.255.250:1900
ST:urn:schemas-upnp-org:device:InternetGatewayDevice:1
Man:"ssdp:discover"
MX:3

Security risks

With the help of scripting on a web page new risks and dangers can be also caused by the IGD protocol, assuming that the change of the configuration on the gateway device has been permitted. Thereby it would be possible to bring a computer or also a whole network under the control of foreign users what often occurs in criminal intention.[4] Many DSL-Routers, as for example FRITZ!Box common in Europe, support this procedure, the change of the configuration must be mostly still released by the user specially via the web interface, provided that the access was protected to the device by means of a password.

See also

References

  1. ↑ D. Wing, S. Cheshire, M. Boucadair, R. Penno, P. Selkirk (April 2013). "RFC 6887 - Port Control Protocol (PCP)". Internet Engineering Task Force (IETF). ISSN 2070-1721. RFC 6887. Retrieved 2013-06-13. The Port Control Protocol allows an IPv6 or IPv4 host to control how incoming IPv6 or IPv4 packets are translated and forwarded by a Network Address Translator (NAT) or simple firewall, and also allows a host to optimize its outgoing NAT keepalive messages.
  2. ↑ ISO/IEC 29341, http://www.iso.org/iso/home/news_index/news_archive/news.htm?refid=Ref1185
  3. ↑ Roesler, Ruediger (13 June 2013). "Read or Change External IP-Address of a NAT-Router without any Internet Access". Microsoft. Retrieved 19 August 2013.
  4. ↑ Mike Barwise (2008-01-15). "Unwanted remote configuration for home routers". Heise Media UK Ltd. Archived from the original on 8 December 2013. Retrieved 2012-07-21.

External links