Holden Gemini

Holden Gemini
Overview
Manufacturer Holden
Production 1975–1986
Body and chassis
Class Compact

The Holden Gemini is a compact car that was built and sold by General Motors-Holden's from 1975 to 1986. It was derived from the Japanese Isuzu Gemini, one of the many cars based on the GM T-car platform.

First generation

First generation
Overview
Also called Buick Opel
Isuzu Gemini/Isuzu Bellett Gemini
Opel Gemini
Opel Isuzu
Saehan Gemini/Maepsy
Daewoo Maepsy-Na
Production March 1975–April 1985
Assembly Acacia Ridge, Australia [1]
Body and chassis
Body style 2-door coupe
3-door panel van
3-door station wagon
4-door sedan
Layout Front engine, rear-wheel drive
Platform T-body
Powertrain
Engine 1584 cc G161Z I4
1817 cc 4FB1 I4 diesel (TE/TF/TG)
Dimensions
Wheelbase 2,404 mm (94.6 in)
Length 4,234 mm (166.7 in)
Width 1,570 mm (61.8 in)
Height 1,341 mm (52.8 in)

TX (1975–1977)

Holden TX Gemini SL Coupe

The original Holden Gemini model, the TX series, was introduced in February 1975. It was available as a four-door sedan in S and SL specification levels, and as a two-door SL coupe. The TX Gemini was built at Holden's factory at Acacia Ridge, Queensland and contained a high percentage of Australian content.[2]

All TX models shared the same 1.6 litre SOHC Isuzu engine (coded the G161Z). The engine was chain-driven and incorporated a cross-flow design alloy head. A two-barrel "Nikki" Stromberg carburettor was used on Australian models. Early TX models used a cast-iron free flow exhaust manifold, with two outlets into a "Y" pipe was used (this item is commonly used by modifiers for later models). From November 1976 this was changed to a single outlet exhaust header to comply with EPA regulations.[3]

Wheel size was 13" x 4.5", rear brakes were duo-servo units, similar in design to those used in the six-cylinder Torana. Early models used the MSE-type four-speed manual transmission; reverse was positioned to the "left and back".[3] November 1975 saw the introduction of the MSG-type four-speed, reverse on this transmission was to the 'right and back' position. The TX SL sedan was voted Wheels Car of the Year car of the year for 1975, and was the most popular four-cylinder car on the Australian market.[3][4]

TC (1977–1978)

The TC Gemini was sold between March 1977 and April 1978. This model received a minor facelift from the TX, appearance was enhanced by a bolder vertical front grille, and at the rear a silver garnish panel (as opposed to the TX's black). A new Smiths brand heater, demister and ventilation system was used, the two small vents at each end of the dash were removed on this model, except on vehicles fitted with air conditioning.[3]

A "Fashion Pack" interior was now available on both sedan and coupe models, this option was also upgraded to add steel belted radials and a front stabilising bar. Door side impact beams were introduced to improve safety and SL coupes now had a heated rear windscreen.[3]

In April 1977, a limited edition "Sandpiper" model was also offered in both sedan and coupe body shapes. They were identified by a black grille with stainless steel top edge, gold pin stripes, chequered cloth seat inserts and door trims, wood-grain dash sections, radio/cassette player, a four spoke steering wheel and the A9R ('Fashion Pack') suspension package. Externally they were easily identified by the word "Sandpiper: and a bird decal, this was on the side rear quarters of the coupe, and on the rear doors of the sedans.[3]

TD (1978–1979)

The TD series was introduced in April 1978, the most major change over the TC being the introduction of "Radial Tuned Suspension" (RTS) and the option of a five-speed manual transmission. The differential was replaced with a small Salisbury unit as used in the UC Torana, it used tapered Timken wheel bearings as found on all larger Holdens since mid-1971. In April 1979, the rear brakes were changed to Commodore leading-trailing rear drum assemblies.[3]

Exterior appearance was changed with the introduction of a new grille, rectangular headlights (round on base models), wheels were now 13" x 5", rear number plate was relocated in place of the rear garnish panel. A panel van and three-door wagon were also added to the range, the rear bodywork pressings being from the British Vauxhall Chevette/Bedford Chevanne range.[3]

The SL/E version used many interior options from the TC "Sandpiper" series, such as the radio/cassette, four-spoke steering wheel, timber dash inserts, velour seat trim, loop pile carpet and timber (Hardboard) door trim inserts.[3]

Externally, appearance was further enhanced to include stainless steel headlight and grille surrounds, thick stainless steel door window frame mouldings and GM-H designed alloy wheels similar to Sunbird SL/E. Coupes and sedans had colour-coded side mirrors similar to those of Sunbird SL/E and HZ Sandman, door-trims were extended to cover the top of the doors.[3]

SL/E models were replaced by the SL/X in early 1979, it had a slightly lower equipment level but a more competitive price. There was also a limited Edition "Gypsy" package was optional on panel vans, which included extra instrumentation and identifying decals.[3]

Heated rear windscreens were now standard on all but base model sedans, panel vans and wagons. Nylon plaid cloth inserts available on SL's and wagons, air conditioning was now available as an optional accessory.[3]

TE (1979–1982)

1979–1982 Holden TE Gemini SL sedan

The second generation, introduced in October 1979, received major design changes. The body was now more squared with a new front and rear end, styling was compared to the VB Commodore of the same era and carried through the styling of the Isuzu Gemini of the same era. By this time, the Opel Kadett had been changed to front wheel drive and the resemblance of the original Kadett C disappeared.

The TE was the most popular out of all the Geminis, selling over 70 000 units. Initially only available as a sedan, in February 1980 the Panel Van and Station Wagon were added to the line up while the Coupe version was no longer available. The luxury SL/E version was also removed from the line-up, replaced instead with an SL/X variant. In 1981 the TE was introduced to New Zealand, replacing the British-sourced Vauxhall Chevette range.

A limited edition "Gypsy" van was made available in February 1980 and was offered with a tachometer and console gauges. Individual plaid cloth seats were available (a different plaid to other earlier Geminis). The Gypsy featured blacked out grille treatment and door window surrounds, square headlights and full chrome bumpers, full length headlining and carpet (regular vans had vinyl flooring as standard. Gypsys are now a highly collectible Gemini model, with original examples estimated to be worth over A$10,000 to avid collectors.

Engine options stayed the same, in early 1981 the option of a 1.8 litre Isuzu diesel model was introduced, an M76 five-speed gearbox was standard for all diesel models. All diesel Geminis were only available as an SL/X five-speed manual. Rhone Green was a colour made available exclusively for the diesel but other colours in the range could be ordered also.

TF (1982–1983)

The facelifted TF series Gemini was released in March 1982. All models gained new grille treatments and the SL/X variant received flush headlamps. The interior received major revisions with a new dashboard (creating the impression of more space in the vehicle) and a relocated steering column that put the steering wheel in line with the driver, rather than angled towards the centre of the car. The styling is often compared to the then current VH Commodore range but in fact the styling was introduced on the Isuzu Gemini in 1981 and carried across to the Australian model.

TG (1983–1985)

Holden TG Gemini SL sedan

The TG Series was released in March 1983. The SL and SL/X versions of TG had an appearance exactly like the TF SL/X, with the flush head lamps, plastic bumpers and tail lights very similar to that on a VH Commodore. However, the base model of the TG continued the TF theme, with many examples now confused for TF models. Base model vehicles had vinyl seats, no clock or cigarette lighter, and no console around the shifter. The engine continued to be the 66 PS (49 kW) 1.6 liter as per previous versions, with the optional 54 PS (40 kW) 1.8 diesel also available.[5]

Holden TG Gemini ZZ/Z

1983 saw a performance model, named the ZZ/Z (triple zed). The ZZ/Z was always silver, with a body kit consisting of a front bar, wind splitters on top of the guards, a bobtail boot spoiler, alloy wheels and blue and black ZZ/Z decals. It is often perceived that the ZZ/Z came with the twin-cam engine that was used in the Isuzu Gemini ZZ/R of the same era, however, the ZZ/Z was strictly a cosmetic version and came with the standard running gear of other models.[5] A five-speed manual gearbox was standard, with somewhat altered gearing an automatic transmission was not available.


Second generation

Second generation
Overview
Also called Chevrolet Gemini
Chevrolet Spectrum
Geo Spectrum
Isuzu Gemini
Isuzu I-Mark
Pontiac Sunburst
Production April 1985–1986
Assembly Elizabeth, Australia [6]
Body and chassis
Body style 4-door sedan
Layout Front engine, front-wheel drive
Platform R-body
Powertrain
Engine 1471 cc 4XC1 I4

RB (1985–1986)

In May 1985 the RB series Gemini was released. Based on the front-wheel drive GM R platform, it did not sell as well as previous rear-wheel drive Geminis, with production totalling just 16,263 units. The RB Gemini was offered only in four-door sedan form, with SL/X and SL/E trim levels, as well as a fleet-only SL. Unlike previous Gemini models which had been built at the Holden facility at Acacia Ridge, Queensland, the RB was produced at the Holden plant at Elizabeth, South Australia.[7] The RB Gemini was discontinued in 1987,[8] although production ended sometime during 1986 due to poorer sales than its predecessor. The Gemini was replaced by the Holden Astra—a rebadged Nissan Pulsar (N12).

1985–1986 Holden Gemini (RB) SL/X

The RB Gemini was notable for its 80-day, 200,000 kilometres (120,000 mi) endurance run from a commercial in 1985, tested by a group of Australian racers including the late Peter Brock.


Safety

In Australia, the 1982–1984 Holden Gemini was assessed in the "Used Car Safety Ratings" 2006 as providing "significantly worse than average" protection for its occupants in the event of a crash.[9]

Production figures

Model Total Cumulative total
Gemini TX 43,099 43,099
Gemini TC 17,256 60,355
Gemini TD 42,396 102,751
Gemini TE 70,567 173,318
Gemini TF 28,326 201,644
Gemini TG 24,675 226,319
Gemini RB 16,263 242,582[10]

References

  1. Norm Darwin, 100 Years of GM in Australia, 2002, page 244
  2. Norm Darwin, 100 Years of GM in Australia, 2002, page 344
  3. 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 "Gemini Model Features and ID". HoldenGemini.net. Retrieved 2010-04-02.
  4. "Wheels – Wheels' COTY the real McCoy". Wheelsmag.com.au. Retrieved 2010-04-02.
  5. 5.0 5.1 Mastrostefano, Raffaele, ed. (1985). Quattroruote: Tutte le Auto del Mondo 1985 (in Italian). Milano: Editoriale Domus S.p.A. pp. 451–452. ISBN 88-7212-012-8.
  6. Norm Darwin, 100 Years of GM in Australia, 2002, page 249
  7. Norm Darwin, 100 Years of GM in Australia, 2002, page 349
  8. The Red Book, August 1988, page 75
  9. "Safety & Rules : VicRoads". Vicroads.vic.gov.au. Retrieved 2010-04-02.
  10. The Holden Heritage. Factory-issued booklet, July 2001 edition, p.100.

External links

Wikimedia Commons has media related to Holden Gemini.