HMS Viper (1899)

For other ships of the same name, see HMS Viper.
HMS Viper
Career (UK)
Name: HMS Viper
Ordered: 4 March 1898
Builder: Hawthorn Leslie and Company
Laid down: 1898
Launched: 6 September 1899
Commissioned: 1900
Fate: Struck rocks near Alderney, 3 August 1901
General characteristics [1]
Class and type:Viper-class torpedo boat destroyer
Displacement:344 long tons (350 t) normal
393 long tons (399 t) deep load
Length:210 ft 3 1⁄2 in (64.10 m)
Beam:21 ft (6.40 m)
Draught:9 ft 9 in (2.97 m)
Propulsion:Parsons turbines, 10,600 ihp (7,904 kW)
Speed:33.8 knots (63 km/h; 39 mph)
Complement:68
Armament:
  • 1 × 12 pounder gun
  • 5 × 6 pounder guns
  • 2 × torpedo tubes

HMS Viper was a Viper-class torpedo boat destroyer (or "TBD") built for the British Royal Navy in 1899 by Hawthorn Leslie and Company at Hebburn on the River Tyne.

She was notable for being one of the first warships to use steam turbine propulsion, manufactured by Parsons Marine. There were four shafts, with two propellers on each, one inboard and one outboard of the shaft A-bracket.

Viper and another turbine-powered ship, the Armstrong Whitworth special-type Cobra were both lost to accidents in 1901: Viper foundered on rocks in fog during naval manoeuvres near Alderney on 3 August 1901, while Cobra broke her back in a storm in the North Sea on 18 September 1901. Since then the Royal Navy has not used snake names for destroyers.

Construction and design

Following the success of the turbine-powered yacht Turbinia, the British Admiralty, whose previous attempts at acquiring destroyers faster than the standard "thirty-Knotters", the reciprocating-engined Albatross, Express and Arab had been unsuccessful, placed an order on 4 March 1898 with Parsons Marine for a turbine-powered destroyer, HMS Viper. Parsons subcontracted the ship's hull to Hawthorn Leslie and Company of Tyneside, with Viper being laid down later that year.[2][3]

The turbines, supplied by Parsons, drove four shafts, with two propellers per shaft. The outer shafts were driven by high pressure turbines and the inner shafts by low pressure turbines, while the inner pair also was fitted with separate turbines for running astern. No cruising engines were fitted. Four Yarrow boilers fed the turbines, the uptakes from which were routed to three funnels.[3][4][5] The ship had a contract speed of 31 knots (57 km/h; 36 mph), although Parsons expected the ship to reach speeds of at least 34 knots (63 km/h; 39 mph).[2]

Viper carried a gun armament of a single QF 12 pounder 12 cwt (3 in (76 mm) calibre) gun on a platform on the ship's conning tower (in practice the platform was also used as the ship's bridge) and five 6-pounder (57 mm) guns, together with two 18-inch (450 mm) torpedo tubes, the standard armament for contemporary Royal Navy destroyers.[1][6]

Viper was launched on 6 September 1899.<ref name="ref name="Lyon p30"/> On trials, she comfortably met the contract speed, reaching 31.017 knots (57.443 km/h; 35.694 mph) during her fuel consumption trial on 16 August 1900, and 33.57 knots (62.17 km/h; 38.63 mph) over a measured mile during full speed trials on 31 August 1900, making her the fastest destroyer in the world.[2][3] Reports indicate that Viper may have reached even higher speeds during trials, variously reported as 35.5 knots (65.7 km/h; 40.9 mph)[5] or even 36.858 knots (68.261 km/h; 42.415 mph).[3]

While the ship's turbines allowed the ship to reach very high speeds in trials, with low levels of vibration, fuel consumption was very high, and the ship's turbines, which had been optimised for high speed, was inefficient at slower speeds. This made Viper of limited use to the Fleet, only being capable of patrolling off Alderney from her base at Portland for 24 hours before being forced to return to base due to lack of fuel.[7][8]

Loss of Viper

On 3 August 1901 Viper sailed from Portland to take part in a search as part of the annual fleet exercises. Arriving off Alderney's Casquet Rocks in mid-afternoon, she spent some time searching the area. Visibility was generally good, although there were patches of mist, and she was able to sight a vessel playing the 'enemy' in the exercise.

By early evening the mist had become fog and she slowed to 10 knots. At 17:23 hrs breakers were spotted on the starboard bow and she turned to port, but found rocks all around and soon grounded. The destroyer fought clear, but soon grounded again and lost her propellors, finally drifting broadside onto the rocks. By 18:45, with the engine room flooded and Viper heeling over, she was abandoned. A local pilot's launch arrived to offer assistance and towed the boats ashore with the crew. Daylight on the following day showed her on Renonquet Rocks and beyond recovery. The damage increased until her back was broken and the bow section sheered around perpendicular to the keel.

The subsequent enquiry found that the commanding officer, Lieutenant William Speke, had failed to exercise proper precautions while steaming in fog. In particular, he had not ensured that an accurate record of the courses steered was maintained. He was reprimanded. The navigating officer, Sub-Lieutenant Kenneth Mackenzie Grieve, was informed that he had "incurred their Lordships' displeasure", having inserted the missing data into the log following the wreck.

In December 1901 the wreck of the Viper was sold to Messrs. Agnes and Co., of Southampton, for £100[9]

References

  1. ↑ 1.0 1.1 Friedman 2009, p. 292.
  2. ↑ 2.0 2.1 2.2 Lyon 2001, p. 30.
  3. ↑ 3.0 3.1 3.2 3.3 Friedman 2009, p. 59.
  4. ↑ Manning 1961, p. 43.
  5. ↑ 5.0 5.1 "H.M. Destroyer Viper" (PDF). The Engineer 90: p. 170. February 16, 1900.
  6. ↑ Lyon 2001, pp. 98–99.
  7. ↑ Friedman 2009, pp. 59–61.
  8. ↑ Lyon 2001, pp. 30–31.
  9. ↑ "Naval and Military intelligence" The Times (London). Tuesday, 3 December 1901. (36628), p. 6.

External links