HMCS Collingwood (K180)

HMCS Collingwood
Career (Canada)
Name: Collingwood
Namesake: Collingwood, Ontario
Operator: Royal Canadian Navy
Ordered: 1 February 1940
Builder: Collingwood Shipyards Ltd. Collingwood, Ontario
Laid down: 2 March 1940
Launched: 27 July 1940
Commissioned: 19 November 1940
Decommissioned: 23 July 1945
Identification: Pennant number: K180
Honours and
awards:		 Atlantic 1941–44[1]
Fate: scrapped 1950
General characteristics
Class and type:Flower-class corvette (original)[2]
Displacement:925 long tons (940 t; 1,036 short tons)
Length:205 ft (62.48 m)o/a
Beam:33 ft (10.06 m)
Draught:11.5 ft (3.51 m)
Propulsion:
  • single shaft
  • 2 x fire tube Scotch boilers
  • 1 x 4-cycle triple-expansion reciprocating steam engine
  • 2,750 ihp (2,050 kW)
Speed:16 knots (29.6 km/h)
Range:3,500 nautical miles (6,482 km) at 12 knots (22.2 km/h)
Complement:85
Sensors and
processing systems:
  • 1 x SW1C or 2C radar
  • 1 x Type 123A or Type 127DV sonar
Armament:

HMCS Collingwood was a Flower-class corvette that served with the Royal Canadian Navy during the Second World War. She served primarily in the Battle of the Atlantic though also saw service as a training vessel. She was named for Collingwood, Ontario.

Background

Flower-class corvettes like Collingwood serving with the Royal Canadian Navy during the Second World War were different from earlier and more traditional sail-driven corvettes.[3][4][5] The "corvette" designation was created by the French as a class of small warships; the Royal Navy borrowed the term for a period but discontinued its use in 1877.[6] During the hurried preparations for war in the late 1930s, Winston Churchill reactivated the corvette class, needing a name for smaller ships used in an escort capacity, in this case based on a whaling ship design.[7] The generic name "flower" was used to designate the class of these ships, which – in the Royal Navy – were named after flowering plants.[8]

Corvettes commissioned by the Royal Canadian Navy during the Second World War were named after communities for the most part, to better represent the people who took part in building them. This idea was put forth by Admiral Percy W. Nelles. Sponsors were commonly associated with the community for which the ship was named. Royal Navy corvettes were designed as open sea escorts, while Canadian corvettes were developed for coastal auxiliary roles which was exemplified by their minesweeping gear. Eventually the Canadian corvettes would be modified to allow them to perform better on the open seas.[9]

Construction

Collingwood was ordered on 1 November 1940 as part of the 1939–1940 Flower-class building program. She was laid down on 2 March 1940 by Collingwood Shipyards Ltd. at Collingwood, Ontario and launched 27 July later that year.[10] She was commissioned on 9 November 1940 at Collingwood, the first corvette to enter Canadian service.

In early December 1941 she went on a two-month refit at Halifax. Between 1942 and 1944 Collingwood had three minor refits. In October 1943, she was sent to New York for a major refit that lasted until December of that year, during which her fo'c'sle was extended.[11]

Wartime Service

After arriving at Halifax and completing her work up, Collingwood joined Halifax Force in January 1941. She worked with them until 23 May when she transferred to Newfoundland Escort Force (NEF). Beginning in June she spent the next six months escorting convoys from St. John's to Iceland.[11] The first NEF convoy to face battle, HX 113, had three corvettes as part of the escort. However none of them had adequate communications equipment as they were only able to communicate through signals and not radio. This led to six losses and the escorts were only able to stop the attacks due to a reinforcement of Royal Navy escorts out of Iceland.[12]

After completing her working up after her first refit, Collingwood was assigned to the "Newfie" – "Derry" run, which were the Atlantic convoys that no longer switched escort groups near Iceland, but went all the way to the United Kingdom. She spent 1942 through to 1944 escorting convoys on this run. From December 1942 onward, Collingwood was a member of escort group EG C-4. From April 1945 until June 1945, Collingwood served as a training ship at Digby, Nova Scotia.[11]

Post war service

Collingwood was paid off on 23 July 1945 at Sorel, Quebec. She was sold for scrapping and broken up at Hamilton in 1950.[11]

References

  1. ↑ "Battle Honours". Britain's Navy. Retrieved 5 August 2013.
  2. ↑ Lenton, H.T.; Colledge, J.J (1968). British and Dominion Warships of World War II. Doubleday & Company. pp. 201, 212.
  3. ↑ Ossian, Robert. "Complete List of Sailing Vessels". The Pirate King. Retrieved 13 April 2011.
  4. ↑ Fitzsimons, Bernard, ed. (1978). The Illustrated Encyclopedia of 20th Century Weapons & Warfare 11. London: Phoebus. pp. 1137–1142.
  5. ↑ Jane's Fighting Ships of World War II. New Jersey: Random House. 1996. p. 68. ISBN 0-517-67963-9.
  6. ↑ Blake, Nicholas; Lawrence, Richard (2005). The Illustrated Companion to Nelson's Navy. Stackpole Books. pp. 39–63. ISBN 0-8117-3275-4.
  7. ↑ Chesneau, Roger; Gardiner, Robert (June 1980). Conway's All the World's Fighting Ships (1922–1946). Naval Institute Press. p. 62. ISBN 0-87021-913-8.
  8. ↑ Milner, Marc (1985). North Atlantic Run. Naval Institute Press. pp. 117–119, 142–145, 158, 175–176, 226, 235, 285–291. ISBN 0-87021-450-0.
  9. ↑ Macpherson, Ken; Milner, Marc (1993). Corvettes of the Royal Canadian Navy 1939–1945. St. Catharines: Vanwell Publishing. ISBN 1-55125-052-7.
  10. ↑ "HMCS Collingwood (K180)". Uboat.net. Retrieved 5 August 2013.
  11. ↑ 11.0 11.1 11.2 11.3 Macpherson, Ken; Burgess, John (1981). The ships of Canada's naval forces 1910–1981 : a complete pictorial history of Canadian warships. Toronto: Collins. p. 74. ISBN 0-00216-856-1.
  12. ↑ German, Tony (1990). The Sea is at our Gates : The History of the Canadian Navy. Toronto: McClelland and Stewart Inc. p. 99. ISBN 0-7710-3269-2.