Goodpasture Bridge

Goodpasture Bridge
U.S. National Register of Historic Places
Country United States
State Oregon
County Lane
Nearest city Vida, Oregon
Road Goodpasture Road
Crosses McKenzie River
Coordinates 44°8′53″N 122°35′15″W / 44.14806°N 122.58750°WCoordinates: 44°8′53″N 122°35′15″W / 44.14806°N 122.58750°W
Length 237 ft (72 m) [1]
Width 17.7 ft (5 m) [1]
Clearance 15.3 ft (5 m)
Architect Oregon State Highway Department
Design Howe Truss Bridge
Material Wood
Built 1938
Governing Body Lane County Public Works Department
Load 25 short tons (23 t)[1]
NBI Number 39C118109400001
NRHP Ref Number 79002100
Added to NRHP November 29, 1979
MPS Group Oregon Covered Bridges
Location of the Goodpasture Bridge in Oregon

The Goodpasture Bridge spans the McKenzie River near the community of Vida in Lane County, Oregon, United States. It is the second longest covered bridge and one of the most photographed covered bridges in the state. The Goodpasture Bridge is listed on the National Register of Historic Places.

History

Lane County was the first Oregon county to build covered bridges on a large scale. Today, the county has more surviving covered bridges than any other county west of the Mississippi River, with a total of 17 bridges, including 14 that are still open to traffic. The county's engineering division maintains the covered bridges that are open to traffic, including the Goodpasture Bridge.[2]

The Goodpasture Bridge was built in 1938, and cost $13,154 to construct. It was named for Benjamin Franklin Goodpasture, a pioneer farmer who had settled near the bridge site. The bridge crosses the McKenzie River two miles west of the community of Vida. At 165 feet (50 m) long, it the second longest covered bridge in Oregon.[3][4] Because of its unique scenic beauty and its importance to Oregon's transportation history, the Goodpasture Bridge was listed on the National Register of Historic Places in 1979.[5]

Over time, bridge traffic significantly weakened the structure. In 1987, Lane County officials decided to restore the original covered bridge instead of bypassing it with a modern concrete span. The county spent $750,000 to renovate the bridge structure, road surface, and approaches. The project also added a right-turn lane for traffic exiting Oregon Route 126 onto the bridge, and built a concrete retaining wall along the north bank of the McKenzie River to stabilize the area. Today, the Goodpasture Bridge handles a normal load of traffic including logging trucks.[3][6]

In 2005, the Lane County Public Works Department began issuing a series of 17 commemorative coins to honor the county's covered bridges. Income from coin sales is used to help maintain the historic bridges. The first coin, struck in the fall of 2005, honored the Goodpasture Bridge. The remaining sixteen coins are being released at a rate of two per year through 2013.[2]

In 2010, Lane County reported receiving $2 million in a federal transportation grant to repair the bridge and raise its derated load limit from 15 short tons (14 t) back to 40 short tons (36 t) beginning in 2012.[7]

Structure

The Goodpasture Bridge was designed by the Oregon State Highway Department (now the Oregon Department of Transportation) and was built by Lane County. A.C. Striker was the county bridge superintendent at the time of its construction. It was built to allow local families and commercial logging trucks to cross the McKenzie River.[6][8]

The Goodpasture Bridge is a classic covered bridge in design. The deck is 17.7 feet (5.4 m) wide with vertical clearance of 15.3 feet (4.7 m). The bridge's two foundation tiers are concrete. Its wooden floor planks and shingled roof are intact, as is the weatherboard housing that protects the Howe truss infrastructure from the weather.[9][10]

Most of Oregon's covered bridges, including the Goodpasture Bridge, were built using the Howe truss system, developed in 1840 by the Massachusetts architect William Howe. The system uses heavy timbers reinforced with iron or steel rods. The trusses have central beams and crossed timbers with adjustable, vertical iron rods to support the structural load.[11]

The Goodpasture Bridge is one of the most photographed bridges in the state of Oregon. The bridge's architectural detailing includes false end beams, semi-elliptical portals, and ten Gothic style louvered windows on each side. The windows were built to allow light into the long covered structure so drivers could see oncoming traffic. During the Christmas season, the bridge is hung with decorations, attracting many winter visitors.[3][6]

See also

References

  1. ↑ 1.0 1.1 1.2 Federal Highway Administration National Bridge Inventory (2007). "Place Name: Lane (County), Oregon NBI Structure Number: 39C118109400001". Nationalbridges.com (Alexander Svirsky). Retrieved 2007-09-14.
  2. ↑ 2.0 2.1 Kletzok, Melinda, "Goodpasture Bridge Commemorative Coins: Going, Going, Gone", Public Information Office, Lane County Government, Eugene, Oregon, December 9, 2005.
  3. ↑ 3.0 3.1 3.2 "Goodpasture Covered Bridge", Lane County, Oregon, eGovernment, Eugene, Oregon, September 1, 2008.
  4. ↑ "Welcome to the McKenzie River Valley", McKenzie River Reflections Newspaper, McKenzie Bridge, Oregon, September 1, 2008.
  5. ↑ "Goodpasture Bridge", National Register of Historic Places, www.nationalregisterofhistoricalplaces.com, August 26, 2008.
  6. ↑ 6.0 6.1 6.2 "McKenzie River (Goodpasture) Covered Bridge", Oregon.com, Oregon Interactive Corporation, McMinnville, Oregon, 2006.
  7. ↑ "Historic Covered Bridge About To Be Fixed". KPTV. November 30, 2010. Retrieved 2010-11-30.
  8. ↑ Lindsey, David, "Goodpasture Bridge", Covered Bridges in Oregon, Thurston High School and the Springfield Museum, Springfield, Oregon, May 19, 2000.
  9. ↑ "Goodpasture Bridge", Archiplanet, www.archiplanet.org, December 5, 2006.
  10. ↑ "Goodpasture Road Bridge", Historic Bridges of the United States, www.bridgehunter.com, 2008
  11. ↑ Hauser, Susan, "Over the River and Through the Bridge", The New York Times, New York, New York, March 23, 2003.

External links