General Electric LMS100
| LMS100 | |
|---|---|
| Type | Gas turbine |
| National origin | United States |
| Manufacturer | General Electric |
| First run | 2000s |
| Developed from | General Electric LM6000 |
The General Electric LMS100 is an aero derivative gas turbine produced by GE Distributed Power.
Design and development
The LMS100 PA produces approximately 100 MW at an efficiency of around 46% LHV in open cycle operation. It is currently the largest and most efficient gas turbine which is able to produce full rated power in under 10 minutes.
The LMS100 comprises a low pressure compressor, an intercooler, a supercore and a power turbine. The supercore (comprising HP compressor, compressor rear frame, high pressure turbine and intermediate pressure turbine) is a development of the LM6000, which in turn was based on the CF6-80C2. The low pressure compressor is from the 6FA industrial gas turbine.
The first LMS100 engine entered commercial operation in July 2006 and a second unit in 2008 at Groton Generation Station owned and operated by Basin Electric near Groton. Other operational LMS100 power stations are at Laredo, TX (USA), El Paso, TX (USA), Firebaugh, CA (USA), Waterbury, CT (USA), Santiago (Chile), Guemes (Argentina), Edmonton (Canada) and Conectiv Energy's Cumberland station in Millville, New Jersey, Stratford_Power_Station in May 2011, and in Kwinana in 2012 Kwinana_Power_Station, Perth, Western Australia.[1]
The LMS100 PA gas turbines utilize water injection for NOx control. The LMS100 PB gas turbine is being developed using dry low NOx (DLE) combustors. The first LMS100 PB unit is expected to enter commercial operation in 2011.
See also
- Related development
- Related lists
References
External links
| ||||||||||||||||||||||