GWR Toad

A "Toad" brake van of the Great Western Railway

The GWR Toad was a railway brake van, designed by and built for the Great Western Railway. From 1894, it was used by the GWR and post-1947 by the Western Region of British Railways to act as a safety brake on goods trains in the West of England, the Midlands and Wales.

No longer within Network Rail operational use, a number have survived within preservation and on many heritage railways due to its long open veranda and large enclosed cabin, making it an ideal, cheap and versatile passenger carriage.

Background

By HM Railway Inspectorate law, every goods train needed a brake van attached at the end of it. This was because most wagons were only fitted with hand brakes, and so the brake van had an important part to play in the safe running of goods trains by adding additional braking capacity. Once trains fitted with vacuum brakes were introduced (from 1904 on the GWR), a guard was required to travel at the rear of every train to ensure that it stayed as one train.^[1]

Design

Sand boxes and hand brake on the veranda

The handle for operating the sand boxes

The nickname "Toad" was derived from the GWR's telegraphic code for a brake van, with each bespoke Toad model allocated diagrams in the AA series. The standard GWR brake van design dates from 1894, with many varieties were built between 1894 and the early 1950s.^[2] Early vans were just 10 or 12 tons weight, but this gradually increased to 20 tons.^[3]

Each Toad had a large guards compartment/cabin extending about two-thirds of the length of the van, with the remaining "veranda" open on three sides, but covered with a roof. Full length external footboards and hand rails allowed the guard or a shunter to ride on the outside during shunting movements. On the veranda, sand boxes were fitted to the rear to allow the guard to sand the rails if necessary, to stop the wheels slipping. A full height door allowed access from the veranda to the cabin, matched by a door on the far end of cabin in most versions. Whilst all versions had side entrances on both sides onto the veranda, some version included additional full height side doors into the cabin. Inside the cabin were: tool boxes; cupboards; a light and other electrical systems powered by an axle mounted dynamo; a seat; a combined table/desk, often two, with one collapsible; and a stove powered by wood or coal collected from the lineside.^[3] The guard was first aid trained, and so the cabin contained the train's main first aid kit. Like the roof, the inside of the cabin was painted white for safety reasons, derived from the practice of the time in hospitals. Windows in both ends of the cabin allowed the guard to see out and keep an eye on his train, but actual operations were only possible from the open veranda, which made this a cold and weather-beaten job all year round.^[3]

Most Toads carried the name of their home depot on the side. The GWR had a practice of allocating Toads to fixed runs, allowing the allocated guards to build up experience on a particular route, and hence increase safety.^[4]

Derivatives

Specialised types included AA8 which had a low, central body to allow forward visibility (for the banking locomotive) on the steeply-graded Pontnewynydd line in south Wales; it had an open veranda at each end. AA7 were small 12 ton vans for working over the Metropolitan Railway’s underground lines to Smithfield Market. AA4 were fully enclosed vans for working through the lengthy Severn Tunnel. Other fully enclosed vans were built for use on permanent way trains and were given diagram AA6. The next batch of permanent way vans were rated at 25 tons and fitted with ploughs to spread newly laid ballast (AA10).^[3] Diagram AA23 was the last GWR design of TOAD, and several vans from this lot of 326 never saw GWR service, having been completed under British Railways.^[5]

Withdrawal

In 1968, the requirement for fully fitted freight trains to end with a guard's van was lifted. From this point onwards, the guard was allowed to ride in the rearmost locomotive cab, giving a good view of the whole train. By this point in time: the Beeching Axe had reduced by two thirds the amount of trackage in the UK; most steam locomotives had been withdrawn; the quantity of wagon-load freight services was in decline; and most British Railways diesel and electric locomotives had cabs at both ends. As a result, although still required for unfitted trains, there was less operational need for so many brake vans, and like many designs the GWR Toads were withdrawn.

Preservation

A sturdy and well built design offering a large enclosed open area, many Toads initially survived into a new life on industrial railways through being deemed "safe" to be used by HM Railway Inspectorate for the transport of workers. It was deemed effectively a small railway carriage.

This generic safety approval was noted and followed initially by many railway preservation societies, who bought Toads to offer ride-on experiences on their developing lines. Hence the number of Toads that survived into preservation versus a number of other pre-grouping designs, and later British railways types, is relatively high.

List of preserved GWR Toad brake vans

No.	Image	Built	Date	Style	First allocation	Last allocation	Current location	Notes
17391		Swindon Works	1939	AA21			Bristol Harbour Railway
17392							Gloucestershire Warwickshire Railway
17908		Swindon Works	1913	AA13	Cardiff		Bluebell Railway[6]
35290		Swindon Works	1948	AA23			Museum of the Great Western Railway
35377		Swindon Works	1948	AA23			Llanelli and Mynydd Mawr Railway
35413		Swindon Works	1947	AA23			East Somerset Railway[5]
40362		Swindon Works	1895	AA6	Hereford		Severn Valley Railway	Fully enclosed permanent way derivative
56400		Swindon Works	1900	AA3			Didcot Railway Centre
68500		Swindon Works	1947	AA23			Great Central Railway
68684		Swindon Works	1924	AA15	Hayle		Didcot Railway Centre
68777		Swindon Works	1939	AA20	Newton Abbot		South Devon Railway
114751		Swindon Works	1934	AA20			Rowden Mill
		Swindon Works				Manchester Ship Canal	Gloucester Docks

References

• Atkins, Beard, Hyde and Tourret (1975). A history of GWR Goods Wagons, Volume1. David and Charles. ISBN 0-7153-6532-0. 
• Atkins, Beard, Hyde and Tourret (1976). A history of GWR Goods Wagons, Volume2. David and Charles. ISBN 0-7153-7290-4. 

Notes

Wikimedia Commons has media related to Great Western Railway brake vans.