Formaldehyde

Methanal redirects here. It is not to be confused with methanol or menthol.
For other uses, see Formaldehyde (disambiguation).
Formaldehyde
Names
IUPAC name
Methanal
Systematic IUPAC name
Methanal
Other names
Methyl aldehyde
Methylene glycol
Methylene oxide
Formalin
Formol
Identifiers
3DMet B00018
ATCvet code QP53AX19
1209228
50-00-0 Yes
ChEBI CHEBI:16842 Yes
ChEMBL ChEMBL1255 Yes
ChemSpider 692 Yes
DrugBank DB03843 Yes
EC number 200-001-8
445
Jmol-3D images Image
KEGG D00017 Yes
MeSH Formaldehyde
PubChem 712
RTECS number LP8925000
UNII 1HG84L3525 Yes
UN number 2209
Properties[1]
Molecular formula
 CH2O
Molar mass 30.03 g·mol−1
Appearance Colorless gas
Density 0.8153 g/cm³ (−20 °C)[2]
Melting point −92 °C (−134 °F; 181 K)
Boiling point −19 °C (−2 °F; 254 K)[2]
400 g dm−3
log P 0.350
Vapor pressure >1 atm (20°C)[3]
Acidity (pKa) 13.3
Basicity (pKb) 0.7
Dipole moment 2.33 D
Structure
Point group C2v
Molecular shape Trigonal planar
Hazards
MSDS MSDS
EU Index 605-001-00-5
EU classification Toxic (T)
Corrosive (C)
Carc. Cat. 1
R-phrases R23/24/25 R34 R43 R45
S-phrases (S1/2) S26 S36/37/39 S45 S51 S53 S60
NFPA 704
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g., propane Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
4
3
0
Flash point 64 °C (147 °F; 337 K)
430 °C (806 °F; 703 K)
Explosive limits 7–73%
100 mg/kg (oral, rat)[4]
US health exposure limits (NIOSH):
TWA 0.75 ppm ST 2 ppm (as formaldehyde and formalin)[3][5]
Ca TWA 0.016 ppm C 0.1 ppm [15-minute][3]
Ca [20 ppm][3]
Related compounds
Related aldehydes
Acetaldehyde

Butyraldehyde
Decanal
Heptanal
Hexanal
Nonanal
Octadecanal
Octanal
Pentanal
Propionaldehyde

Related compounds
 methanol
formic acid
Except where noted otherwise, data is given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
 Yes verify (what is: Yes/?)
Infobox references

Formaldehyde is a naturally-occurring organic compound with the formula CH2O or HCHO. It is the simplest aldehyde and is also known by its systematic name methanal. The common name of this substance comes from its similarity and relation to formic acid.

A gas at room temperature, formaldehyde is colorless and has a characteristic pungent, irritating odor. It is an important precursor to many other materials and chemical compounds. In 1996, the installed capacity for the production of formaldehyde was estimated to be 8.7 million tonnes per year.[6] Commercial solutions of formaldehyde in water, commonly called formol or formalin, were formerly used as disinfectants and for preservation of biological specimens. It is also used for the embalming of human remains. It is commonly used in nail hardeners and/or nail varnish.

In view of its widespread use, toxicity and volatility, exposure to formaldehyde is a significant consideration for human health.[7] In 2011, the US National Toxicology Program described formaldehyde as "known to be a human carcinogen".[8][9][10]

Forms of formaldehyde

Formaldehyde is more complicated than many simple carbon compounds in that it adopts several different forms. One important derivative is the cyclic trimer metaformaldehyde or 1,3,5-trioxane with the formula (CH2O)3. There is also an infinite polymer called paraformaldehyde. These compounds have similar chemical properties to the molecule CH2O.

When dissolved in water, formaldehyde forms a hydrate, methanediol, with the formula H2C(OH)2. This also exists in equilibrium with various oligomers (short polymers), depending on the concentration and temperature. A saturated water solution, of about 40% formaldehyde by volume or 37% by mass, is called "100% formalin". A small amount of stabilizer, such as methanol, is usually added to suppress oxidation and polymerization. A typical commercial grade formalin may contain 10–12% methanol in addition to various metallic impurities.

Occurrence

Processes in the upper atmosphere contribute up to 90% of the total formaldehyde in the environment. Formaldehyde is an intermediate in the oxidation (or combustion) of methane, as well as of other carbon compounds, e.g. in forest fires, automobile exhaust, and tobacco smoke. When produced in the atmosphere by the action of sunlight and oxygen on atmospheric methane and other hydrocarbons, it becomes part of smog. Formaldehyde has also been detected in outer space (see below).

Formaldehyde and its adducts are ubiquitous in living organisms. It is formed in the metabolism of endogenous amino acids and is found in the bloodstream of humans and other primates at concentrations of approximately 0.1 millimolar.[11] Experiments in which animals are exposed to an atmosphere containing isotopically labeled formaldehyde have demonstrated that even in deliberately exposed animals, the majority of formaldehyde-DNA adducts found in non-respiratory tissues are derived from endogenously produced formaldehyde.[12]

Formaldehyde is the primary cause of methanol's toxicity, since methanol is metabolised into formaldehyde by alcohol dehydrogenase. Formaldehyde does not accumulate in the environment, because it is broken down within a few hours by sunlight or by bacteria present in soil or water. Humans metabolize formaldehyde quickly, so it does not accumulate, and is converted to formic acid in the body.

Interstellar formaldehyde

Formaldehyde was the first polyatomic organic molecule detected in the interstellar medium.[13] Since its initial detection in 1969, it has been observed in many regions of the galaxy. Because of the widespread interest in interstellar formaldehyde, it has recently been extensively studied, yielding new extragalactic sources.[14] A proposed mechanism for the formation is the hydrogenation of CO ice, shown below.[15]

H + CO → HCO
HCO + H → H2CO (rate constant=9.2×10−3 s−1)

Formaldehyde appears to be a useful probe for astrochemists due to its low reactivity in the gas phase and to the fact that the 110←111 and 211←212 K-doublet transitions are rather clear.

On 11 August 2014, astronomers released studies, using the Atacama Large Millimeter/Submillimeter Array (ALMA) for the first time, that detailed the distribution of HCN, HNC, H2CO, and dust inside the comae of comets C/2012 F6 (Lemmon) and C/2012 S1 (ISON).[16][17]

Synthesis and industrial production

Formaldehyde was first reported in 1859 by the Russian chemist Aleksandr Butlerov (1828–86)[18] and was conclusively identified in 1869 by August Wilhelm von Hofmann.[19][20]

Formaldehyde is produced industrially by the catalytic oxidation of methanol. The most common catalysts are silver metal or a mixture of an iron and molybdenum or vanadium oxides. In the commonly used formox process, methanol and oxygen react at ca. 250–400 °C in presence of iron oxide in combination with molybdenum and/or vanadium to produce formaldehyde according to the chemical equation:[6]

2 CH3OH + O2 → 2 CH2O + 2 H2O

The silver-based catalyst usually operates at a higher temperature, about 650 °C. Two chemical reactions on it simultaneously produce formaldehyde: that shown above and the dehydrogenation reaction:

CH3OH → H2CO + H2

In principle, formaldehyde could be generated by oxidation of methane, but this route is not industrially viable because the formaldehyde is more easily oxidized than methane.[6]

Organic chemistry

Formaldehyde is a building block in the synthesis of many other compounds of specialised and industrial significance. It exhibits most of the chemical properties of other aldehydes but is more reactive. For example, it is more readily oxidized by atmospheric oxygen into formic acid (formic acid is found in ppm levels in commercial formaldehyde). Formaldehyde is a good electrophile, participating in electrophilic aromatic substitution reactions with aromatic compounds, and can undergo electrophilic addition reactions with alkenes and aromatics. Formaldehyde undergoes a Cannizzaro reaction in the presence of basic catalysts to produce formic acid and methanol.

Examples of organic synthetic applications

Condensation with acetaldehyde affords pentaerythritol, a chemical necessary in synthesizing PETN, a high explosive.[21] Condensation with phenols gives phenol-formaldehyde resins. With 4-substituted phenols one obtains calixarenes.[22]

When combined with hydrogen sulfide, it forms trithiane.[23]

3CH2O + 3H2S → (CH2S)3 + 3H2O

Formaldehyde can be reduced to methylamine via reductive amination. Methylamine can then be used in other synthetic processes using reductive amination to yield secondary amines.

It is first reacted with ammonia to form an imine and water.

CH2O + NH3 → H2C=NH +H2O

Then this is reduced using LiAlH4 via an Sn2 reaction or by catalytic hydrogenation to produce the amine.

H2C=N-H + LiALH4 → H3CNH2
H2C=N-H + H2 → H3CNH2

Uses

Industrial applications

Formaldehyde is a common precursor to more complex compounds and materials. In approximate order of decreasing consumption, products generated from formaldehyde include urea formaldehyde resin, melamine resin, phenol formaldehyde resin, polyoxymethylene plastics, 1,4-butanediol, and methylene diphenyl diisocyanate.[6] The textile industry uses formaldehyde-based resins as finishers to make fabrics crease-resistant.[24] Formaldehyde-based materials are key to the manufacture of automobiles, and used to make components for the transmission, electrical system, engine block, door panels, axles and brake shoes. The value of sales of formaldehyde and derivative products was over $145 billion in 2003, about 1.2% of the gross domestic product (GDP) of the United States and Canada. Including indirect employment, over 4 million people work in the formaldehyde industry across approximately 11,900 plants in the U.S. and Canada.[25]

When treated with phenol, urea, or melamine, formaldehyde produces, respectively, hard thermoset phenol formaldehyde resin, urea formaldehyde resin, and melamine resin. These polymers are common permanent adhesives used in plywood and carpeting. It is used as the wet-strength resin added to sanitary paper products such as (listed in increasing concentrations injected into the paper machine headstock chest) facial tissue, table napkins, and roll towels. They are also foamed to make insulation, or cast into moulded products. Production of formaldehyde resins accounts for more than half of formaldehyde consumption.

Formaldehyde is also a precursor to polyfunctional alcohols such as pentaerythritol, which is used to make paints and explosives. Other formaldehyde derivatives include methylene diphenyl diisocyanate, an important component in polyurethane paints and foams, and hexamine, which is used in phenol-formaldehyde resins as well as the explosive RDX. Formaldehyde has been found as a contaminant in several bath products, at levels from 54–610 ppm: it is thought to arise from the breakdown of preservatives in the products,[26] most frequently diazolidinyl urea. Since 2006, formaldehyde (methylene glycol) is also used in hair smoothing treatments in order to straighten wavy/curly hair and make hair less prone to frizz under high humid weather. OSHA Oregon has reported these treatments as unsafe for human health.[27]

Disinfectant and biocide

An aqueous solution of formaldehyde can be useful as a disinfectant as it kills most bacteria and fungi (including their spores). Formaldehyde solutions are applied topically in medicine to dry the skin, such as in the treatment of warts. Many aquarists use formaldehyde as a treatment for the parasites Ichthyophthirius multifiliis and Cryptocaryon irritans.[28]

Formaldehyde is used to inactivate bacterial products for toxoid vaccines (vaccines that use an inactive bacterial toxin to produce immunity). It is also used to kill unwanted viruses and bacteria that might contaminate the vaccine during production.[29] Urinary tract infections are also often treated using a derivative of formaldehyde (methenamine), a method often chosen because it prevents overuse of antibiotics and the resultant development of bacterial resistance to them. In an acid environment methenamine is converted in the kidneys to formaldehyde, which then has an antibacterial effect in the urinary tract. Some topical creams, cosmetics and personal hygiene products contain derivatives of formaldehyde as the active ingredients that prevent the growth of potentially harmful bacteria.

Tissue fixative and embalming agent

Octopuses preserved in formaldehyde solution
Steve O'Shea injecting a giant squid specimen with formalin

Formaldehyde preserves or fixes tissue or cells by a mixture of reversible (short exposure time and low temperatures) and irreversible (long exposure time and higher temperatures) cross-linking of primary amino groups in proteins with other nearby nitrogen atoms in protein or DNA through a -CH2- linkage. This is exploited in ChIP-on-chip genomics experiments, where DNA-binding proteins are cross-linked to their cognate binding sites on the chromosome and analyzed to determine what genes are regulated by the proteins. Formaldehyde is also used as a denaturing agent in RNA gel electrophoresis, preventing RNA from forming secondary structures. A solution of 4% formaldehyde fixes pathology tissue specimens at about one mm per hour at room temperature.

Formaldehyde solutions are used as a fixative for microscopy and histology because of formaldehyde's ability to perform the Mannich reaction, although the percentage formaldehyde used may vary based on the method of analysis. Additionally, the methanol used to stabilize formaldehyde may interfere with the ability to properly fix tissue or cells, and therefore commercial formaldehyde preparations are available that are packaged in glass ampules under an inert gas to prevent the use of contaminating methanol for stabilization. Formaldehyde-based solutions are also used in embalming to disinfect and temporarily preserve human and animal remains. It is the ability of formaldehyde to fix the tissue that produces the tell-tale firmness of flesh in an embalmed body. In post mortem examinations a procedure known as the "sink test" involves placing the lungs of an animal in an aqueous solution of formaldehyde; if the lungs float it suggests the animal was probably breathing or able to breathe at the time of death.

Although formaldehyde solutions are commonly used as a biological preserving medium, usually for smaller specimens, it delays, but does not prevent, decay. This method of fixation does not preserve nucleic acids, thus preventing, for example, genetic analysis of the first discovered Dendrogramma specimens.

Several European countries restrict the use of formaldehyde, including the import of formaldehyde-treated products and embalming. Starting September 2007, the European Union banned the use of formaldehyde due to its carcinogenic properties as a biocide (including embalming) under the Biocidal Products Directive (98/8/EC).[30][31] Countries with a strong tradition of embalming corpses, such as Ireland and other colder-weather countries, have raised concerns. Despite reports to the contrary,[32] no decision on the inclusion of formaldehyde on Annex I of the Biocidal Products Directive for product-type 22 (embalming and taxidermist fluids) had been made as of September 2009.[33]

Drug testing

Formaldehyde, along with 18 M (concentrated) sulfuric acid makes Marquis reagent which can be used to identify alkaloids and other compounds.

Photography

In photography, formaldehyde is used in low concentrations for process C-41 (color negative film) stabilizer in the final wash step,[34] as well as in the process E-6 pre-bleach step, to obviate the need for it in the final wash.

Safety

Formaldehyde is highly toxic to all animals, regardless of method of intake. Ingestion of 30 mL (1 oz.) of a solution containing 37% formaldehyde has been reported to cause death in an adult human.[35] Water solution of formaldehyde is very corrosive and its ingestion can cause severe injury to the upper gastrointestinal tract.

Occupational exposure to formaldehyde by inhalation is mainly from three types of sources: thermal or chemical decomposition of formaldehyde-based resins, formaldehyde emission from aqueous solutions (for example, embalming fluids), and the production of formaldehyde resulting from the combustion of a variety of organic compounds (for example, exhaust gases). Formaldehyde can be toxic, allergenic, and carcinogenic.[7] Because formaldehyde resins are used in many construction materials it is one of the more common indoor air pollutants.[36] At concentrations above 0.1 ppm in air formaldehyde can irritate the eyes and mucous membranes, resulting in watery eyes.[37] Formaldehyde inhaled at this concentration may cause headaches, a burning sensation in the throat, and difficulty breathing, and can trigger or aggravate asthma symptoms.[38][39]

A 1988 Canadian study of houses with urea-formaldehyde foam insulation found that formaldehyde levels as low as 0.046 ppm were positively correlated with eye and nasal irritation.[40] A recent review of studies has shown a strong association between exposure to formaldehyde and the development of childhood asthma.[41] Chronic exposure at higher levels, starting at around 1.9 ppm, has been shown to result in significant damage to pulmonary function, resulting in reduced maximum mid-expiratory flow and forced vital capacity.[42] There is also research that supports the theory that formaldehyde exposure contributes to reproductive problems in women. A study on Finnish women working in laboratories at least 3 days a week found a significant correlation between spontaneous abortion and formaldehyde exposure, and a study of Chinese women found abnormal menstrual cycles in 70% of the women occupationally exposed to formaldehyde compared to only 17% in the control group.[42] There have been no studies done on the effect of formaldehyde exposure on reproduction in men.

The primary exposure concern is for the workers in the industries producing or using formaldehyde.

The formaldehyde theory of carcinogenesis was proposed in 1978.[43] In 1987 the U.S. EPA classified it as a probable human carcinogen, and after more studies the WHO International Agency for Research on Cancer (IARC) in 1995 also classified it as a probable human carcinogen. Further information and evaluation of all known data led the IARC to reclassify formaldehyde as a known human carcinogen[44] associated with nasal sinus cancer and nasopharyngeal cancer.[45] Recent studies have also shown a positive correlation between exposure to formaldehyde and the development of leukemia, particularly myeloid leukemia.[46][47] Nasopharyngeal and sinonasal cancers are relatively rare, with a combined annual incidence in the United States of < 4,000 cases.[48][49] About 25,000 cases of myeloid leukemia occur in the United States each year.[50][51] Workplace exposure to inhaled chemicals is among the most important risk factors for sinonasal cancers.[52] Other factors are important in determining individual risk for the development of leukemia or nasopharyngeal cancer.[52][53][54]

In the residential environment, formaldehyde exposure comes from a number of different routes; formaldehyde can off-gas from wood products, such as plywood or particle board, but it is produced by paints, varnishes, floor finishes, and cigarette smoking as well.[55]

The United States Environmental Protection Agency (EPA) allows no more than 0.016 ppm formaldehyde in the air in new buildings constructed for that agency.[56] A U.S. Environmental Protection Agency study found a new home measured 0.076 ppm when brand new and 0.045 ppm after 30 days.[57] The Federal Emergency Management Agency (FEMA) has also announced limits on the formaldehyde levels in trailers purchased by that agency.[58] The EPA recommends the use of "exterior-grade" pressed-wood products with phenol instead of urea resin to limit formaldehyde exposure, since pressed-wood products containing formaldehyde resins are often a significant source of formaldehyde in homes.[45]

Patch test

For most people, irritation from formaldehyde is temporary and reversible, though formaldehyde can cause allergies and is part of the standard patch test series. In 2005–06, it was the seventh-most-prevalent allergen in patch tests (9.0%).[59] People with formaldehyde allergy are advised to avoid formaldehyde releasers as well (e.g., Quaternium-15, imidazolidinyl urea, and diazolidinyl urea).[60] People who suffer allergic reactions to formaldehyde tend to display lesions on the skin in the areas that have had direct contact with the substance, such as the neck or thighs (often due to formaldehyde released from permanent press finished clothing) or dermatitis on the face (typically from cosmetics).[61] Formaldehyde has been banned in cosmetics in both Sweden and Japan. The eyes are most sensitive to formaldehyde exposure: The lowest level at which many people can begin to smell formaldehyde is about 0.05 ppm and the highest level is 1 ppm. The maximum concentration value at the workplace is 0.3 ppm.[62] In controlled chamber studies, individuals begin to sense eye irritation at about 0.5 ppm; 5 to 20 percent report eye irritation at 0.5 to 1 ppm; and greater certainty for sensory irritation occurred at 1 ppm and above. While some agencies have used a level as low as 0.1 ppm as a threshold for irritation, the expert panel found that a level of 0.3 ppm would protect against nearly all irritation. In fact, the expert panel found that a level of 1.0 ppm would avoid eye irritation—the most sensitive endpoint—in 75–95% of all people exposed.[63]

Formaldehyde levels in building environments are affected by a number of factors. These include the potency of formaldehyde-emitting products present, the ratio of the surface area of emitting materials to volume of space, environmental factors, product age, interactions with other materials, and ventilation condition. Formaldehyde emits from a variety of construction materials, furnishings, and consumer products. The three products that emit the highest concentrations are medium density fiberboard, hardwood plywood, and particle board. Environmental factors such as temperature and relative humidity can elevate levels because formaldehyde has a high vapor pressure. Formaldehyde levels from building materials are the highest when a building first opens because materials would have less time to off-gas. Formaldehyde levels decrease over time as the sources suppress.

Formaldehyde levels in air can be sampled and tested in several ways, including impinger, treated sorbent, and passive monitors.[64] The National Institute for Occupational Safety and Health (NIOSH) has measurement methods numbered 2016, 2541, 3500, and 3800.[65]

Studies on the interactions between formaldehyde and proteins at the molecular level have been reported on the effects of the body’s carrier protein, serum albumin. The binding of formaldehyde loosens the skeletal structure of albumin and exposure of aromatic ring amino acids in the internal hydrophobic region. Symptoms may affect personal awareness, making one feel tired or fatigued.

Formaldehyde inhalation has also shown to cause oxidative stress and inflammation in animals. Mice studied over an exposure to a high dose of formaldehyde (3ppm), showed increased levels of NO−
3 levels in plasma. This result suggests that FA inhalation either decreased NO production or increased NO scavenging, which may be an anti-stress mechanism in the body. Formaldehyde inhalation changes the sensitivity of immune system, which influences oxidative stress.

In June 2011, the twelfth edition of the National Toxicology Program (NTP) Report on Carcinogens (RoC) changed the listing status of formaldehyde from "reasonably anticipated to be a human carcinogen" to "known to be a human carcinogen".[8][9][10] Concurrently, a National Academy of Sciences (NAS) committee was convened and issued an independent review of the draft United States Environmental Protection Agency IRIS assessment of formaldehyde, providing a comprehensive health effects assessment and quantitative estimates of human risks of adverse effects.[66]

International bans

There are several web articles claiming that formaldehyde has been banned from manufacture or import into the European Union (EU) under REACH (Registration, Evaluation, Authorization, and restriction of Chemical substances) legislation. This appears to be misinformation, as official EU chemical databases contradict these claims as of February 19, 2010. This misconception has gained some ground. Formaldehyde is not listed in the Annex I of Regulation (EC) No 689/2008 (export and import of dangerous chemicals regulation), nor on a priority list for risk assessment. However, formaldehyde is banned from use in certain applications (preservatives for liquid-cooling and processing systems, slimicides, metalworking-fluid preservatives, and antifouling products) under the Biocidal Products Directive.[67][68] In the EU, the maximum allowed concentration of formaldehyde in finished products is 0.2%, and any product that exceeds 0.05% has to include a warning that the product contains formaldehyde.[61]

In the United States, a bill was passed in Congress on July 7, 2010, regarding the use of formaldehyde in hardwood plywood, particle board, and medium density fiberboard. The bill limited the allowable amount of formaldehyde emissions from these wood products to .09 ppm, a standard which companies were required to meet by January 2013.[69] Formaldehyde was declared a toxic substance by the 1999 Canadian Environmental Protection Act.[70]

FEMA trailer incidents

Hurricanes Katrina and Rita

In the U.S. the Federal Emergency Management Agency (FEMA) provided travel trailers, recreational park trailers and manufactured homes starting in 2006 for habitation by residents of the U.S. gulf coast displaced by Hurricane Katrina and Hurricane Rita. Some of the people who moved into the trailers complained of breathing difficulties, nosebleeds, and persistent headaches. Formaldehyde-catalyzed resins were used in the production of these homes.

The United States Centers For Disease Control and Prevention (CDC) performed indoor air quality testing for formaldehyde[71] in some of the units. On February 14, 2008, the CDC announced that potentially hazardous levels of formaldehyde were found in many of the travel trailers and manufactured homes provided by the agency.[72][73] The CDC's preliminary evaluation of a scientifically established random sample of 519 travel trailers and manufactured homes tested between December 21, 2007, and January 23, 2008 (2+ years after manufacture), showed average levels of formaldehyde in all units of about 0.077 parts per million (ppm). Long-term exposure to levels in this range can be linked to an increased risk of cancer and, at levels above this range, there can also be a risk of respiratory illness. These levels are higher than expected in indoor air, where levels are commonly in the range of 0.01–0.02 ppm, and are higher than the Agency for Toxic Substance Disease Registry (ATSDR, division of the CDC) Minimal Risk Level (MRL) of 0.008 ppm.[74] Levels measured ranged from 0.003 ppm to 0.59 ppm.[75]

FEMA, which requested the testing by the CDC, said it would work aggressively to relocate all residents of the temporary housing as soon as possible. Lawsuits are being filed against FEMA as a result of the exposures.[76]

Iowa floods of 2008

Also in the U.S., problems arose in trailers again provided by FEMA to residents displaced by the Iowa floods of 2008. Several months after moving to the trailers, occupants reported violent coughing, headaches, as well as asthma, bronchitis, and other problems. Tests showed that in some trailers, levels of formaldehyde exceeded the limits recommended by the U.S. Environmental Protection Agency and American Lung Association.[77][78] The associated publicity has resulted in additional testing to begin in November.[79]

2008 Sichuan earthquake

After an earthquake hit Sichuan, China, a large number of survivors were housed in trailers made with medium-density fiberboard that emitted up to 5 times China's maximum allowable formaldehyde levels. In April 2009, 100 miscarriages were recorded in this community, and they may have been linked to formaldehyde exposure from the trailers.[42]

Contaminant in food

Scandals have broken in both the 2005 Indonesia food scare and 2007 Vietnam food scare regarding the addition of formaldehyde to foods to extend shelf life. After a four-year absence, in 2011 Indonesian authorities again found some foods with formaldehyde being sold in markets in a number of regions across the country. Besides using formaldehyde, they also use borax, but not combined together.[80] In August 2011, at least at two Carrefour supermarkets, the Central Jakarta Livestock and Fishery Sub-Department found a sweet glutinous rice drink (cendol) contained 10 parts per million of formaldehyde.[81] In 2014, the owner of two noodle factories in Bogor, Indonesia, was arrested for using formaldehyde in noodles. 50 kg of formaldehyde was confiscated.[82] Foods known to be contaminated include noodles, salted fish, and tofu; chicken and beer are also rumored to be contaminated. In some places, such as China, formaldehyde is still used illegally as a preservative in foods, which exposes people to formaldehyde ingestion.[83] In humans, the ingestion of formaldehyde has been shown to cause vomiting, abdominal pain, dizziness, and in extreme cases can cause death. Testing for formaldehyde is by blood and/or urine by gas chromatography-mass spectrometry. Other methods include infrared detection, gas detector tubes, etc., of which HPLC is the most sensitive.[84] In the early 1900s, it was frequently added by US milk plants to milk bottles as a method of pasteurization due to the lack of knowledge regarding formaldehyde's toxicity.[85][86]

In 2011 in Nakhon Ratchasima, Thailand, truckloads of rotten chicken were exposed to formaldehyde in which "a large network", including 11 slaughterhouses run by a criminal gang, were implicated.[87] In 2012, 1 billion rupiah (almost USD100,000) of fish imported from Pakistan to Batam, Indonesia, were found laced with formaldehyde.[88]

Formalin use in foods is a crucial problem in Bangladesh currently. Local stores and supermarkets often sell fruits, fishes and vegetables that have been treated with formalin to keep them fresh.[89] However, in 2015 a Formalin Control Bill was passed in the Parliament of Bangladesh with a provision of life-term imprisonment as the maximum punishment and in addition 20,00,000 BDT as fine but not less than 5,00,000 BDT for importing, production or hoarding of formalin without license.[90]

See also

References

  1. ↑ Weast, Robert C., ed. (1981). CRC Handbook of Chemistry and Physics (62nd ed.). Boca Raton, FL: CRC Press. pp. C–301, E–61. ISBN 0-8493-0462-8.
  2. ↑ 2.0 2.1 Formaldehyde (PDF), SIDS Initial Assessment Report, International Programme on Chemical Safety
  3. ↑ 3.0 3.1 3.2 3.3 "NIOSH Pocket Guide to Chemical Hazards #0293". National Institute for Occupational Safety and Health (NIOSH).
  4. ↑ http://chem.sis.nlm.nih.gov/chemidplus/rn/50-00-0
  5. ↑ "NIOSH Pocket Guide to Chemical Hazards #0294". National Institute for Occupational Safety and Health (NIOSH).
  6. ↑ 6.0 6.1 6.2 6.3 Günther Reuss, Walter Disteldorf, Armin Otto Gamer, Albrecht Hilt "Formaldehyde" in Ullmann's Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a11_619
  7. ↑ 7.0 7.1 "Formaldehyde, 2-Butoxyethanol and 1-tert-Butoxypropan-2-ol" (PDF). IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 88. Lyon, France: International Agency for Research on Cancer. 2006. pp. 39–325. ISBN 92-832-1288-6. |chapter= ignored (help) "Formaldehyde (gas)", Report on Carcinogens, Eleventh Edition (PDF), U.S. Department of Health and Human Services, Public Health Service, National Toxicology Program, 2005
  8. ↑ 8.0 8.1 Harris, Gardiner (10 June 2011). "Government Says 2 Common Materials Pose Risk of Cancer". New York Times. Retrieved 2011-06-11.
  9. ↑ 9.0 9.1 National Toxicology Program (10 June 2011). "12th Report on Carcinogens". National Toxicology Program. Retrieved 2011-06-11.
  10. ↑ 10.0 10.1 National Toxicology Program (10 June 2011). "Report On Carcinogens – Twelfth Edition – 2011" (PDF). National Toxicology Program. Retrieved 2011-06-11.
  11. ↑ "Review of the Formaldehyde Assessment in the National Toxicology Program 12th Report on Carcinogens". p. 91.
  12. ↑ "Review of the Formaldehyde Assessment in the National Toxicology Program 12th Report on Carcinogens". p. 95.
  13. ↑ Zuckerman, B.; Buhl, D.; Palmer, P.; Snyder, L. E. (1970). "Observation of interstellar formaldehyde". Astrophys. J. 160: 485–506. Bibcode:1970ApJ...160..485Z. doi:10.1086/150449.
  14. ↑ Mangum, Jeffrey G.; Darling, Jeremy; Menten, Karl M.; Henkel, Christian (2008). "Formaldehyde Densitometry of Starburst Galaxies". Astrophys. J. 673 (2): 832–46. arXiv:0710.2115. Bibcode:2008ApJ...673..832M. doi:10.1086/524354.
  15. ↑ Woon, David E. (2002). "Modeling Gas-Grain Chemistry with Quantum Chemical Cluster Calculations. I. Heterogeneous Hydrogenation of CO and H2CO on Icy Grain Mantles". Astrophys. J. 569: 541–48. Bibcode:2002ApJ...569..541W. doi:10.1086/339279.
  16. ↑ Zubritsky, Elizabeth; Neal-Jones, Nancy (11 August 2014). "RELEASE 14-038 - NASA’s 3-D Study of Comets Reveals Chemical Factory at Work". NASA. Retrieved 12 August 2014.
  17. ↑ Cordiner, M.A. et al. (11 August 2014). "Mapping the Release of Volatiles in the Inner Comae of Comets C/2012 F6 (Lemmon) and C/2012 S1 (ISON) Using the Atacama Large Millimeter/Submillimeter Array". The Astrophysical Journal 792 (1). doi:10.1088/2041-8205/792/1/L2. Retrieved 12 August 2014.
  18. ↑ A. Butlerow (1859) "Ueber einige Derivate des Jodmethylens" (On some derivatives of methylene iodide), Annalen der Chemie und Pharmacie, vol . 111, pages 242–252. In this paper, Butlerov discovered formaldehyde, which he called "Dioxymethylen" (methylene dioxide) [page 247] because his empirical formula for it was incorrect (C4H4O4).
  19. ↑ In 1867, A. W. Hofmann first announced to the Royal Prussian Academy of Sciences the production of formaldehyde by passing methanol vapor in air over hot platinum wire. See: A. W. Hofmann (14 October 1867) "Zur Kenntnis des Methylaldehyds" ([Contributions] to our knowledge of methylaldehyde), Monatsbericht der Königlich Preussischen Akademie der Wissenschaften zu Berlin (Monthly Report of the Royal Prussian Academy of Sciences in Berlin), vol. 8, pages 665–669. Reprinted in: However, it was not until 1869 that Hofmann determined the correct empirical formula of formaldehyde. See: A.W. Hofmann (5 April 1869) "Beiträge zur Kenntnis des Methylaldehyds", Monatsbericht der Königlich Preussischen Akademie der Wissenschaften zu Berlin, vol. ?, pages 362–372. Reprinted in:
  20. ↑ Read, J. (1935). Text-Book of Organic Chemistry. London: G Bell & Sons.
  21. ↑ Schurink, H. B. J. (1925). "Pentaerythritol". Org. Synth. 4: 53.; Coll. Vol. 1, p. 425
  22. ↑ Gutsche, C. D.; Iqbal, M. (1993). "p-tert-Butylcalix[4]arene". Org. Synth.; Coll. Vol. 8, p. 75
  23. ↑ Bost, R. W.; Constable, E. W. (1936). "sym-Trithiane". Org. Synth. 16: 81.; Coll. Vol. 2, p. 610
  24. ↑ "Formaldehyde in Clothing and Textiles FactSheet". NICNAS. Australian National Industrial Chemicals Notification and Assessment Scheme. May 2013. Retrieved 12 November 2014.
  25. ↑ Economic Importance, Formaldehyde Council. 2009. Accessed on April 14, 2010.
  26. ↑ "No More Toxic Tub: Getting Contaminants Out Of Children’s Bath & Personal Care Products" (PDF). Campaign for Safe Cosmetics. March 2009. Retrieved 19 May 2012.
  27. ↑ http://www.orosha.org/pdf/Final_Hair_Smoothing_Report.pdf
  28. ↑ Francis-Floyd, Ruth (April 1996). "Use of Formalin to Control Fish Parasites". Institute of Food and Agricultural Sciences, University of Florida.
  29. ↑ Center for Disease Control: Vaccines
  30. ↑ Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market. OJEU L123, 24.04.1998, pp. 1–63. (consolidated version to 2008-09-26 (PDF))
  31. ↑ Commission Regulation (EC) No 2032/2003 of 4 November 2003 on the second phase of the 10-year work programme referred to in Article 16(2) of Directive 98/8/EC of the European Parliament and of the Council concerning the placing of biocidal products on the market, and amending Regulation (EC) No 1896/2000. OJEU L307, 24.11.2003, p. 1–96. (consolidated version to 2007-01-04 (PDF))
  32. ↑ Patel, Alkesh (2007-07-04). "Formaldehyde Ban set for 22 September 2007". WebWire. Retrieved 19 May 2012.
  33. ↑ "European chemical Substances Information System (ESIS) entry for formaldehyde". Retrieved 2009-09-01.
  34. ↑ "Process C-41 Using Kodak Flexicolor Chemicals – Publication Z-131". Kodak. Retrieved 2009-09-01.
  35. ↑ "Medical Management Guidelines for Formaldehyde".
  36. ↑ "Indoor Air Pollution in California" (PDF). Air Resources Board, California Environmental Protection Agency. July 2005. pp. 65–70. Retrieved 19 May 2012.
  37. ↑ "Formaldehyde". Occupational Safety and Health Administration. August 2008. Retrieved 2009-09-01.
  38. ↑ "Formaldehyde Reference Exposure Levels" (PDF). California Office Of Health Hazard Assessment. December 2008. Retrieved 19 May 2012.
  39. ↑ Formaldehyde and Indoor Air. Health Canada. August 2005. ISBN 0-8155-1129-9. Retrieved 2009-09-01.
  40. ↑ Broder, I; Corey, P; Brasher, P; Lipa, M; Cole, P (1991). "Formaldehyde exposure and health status in households". Environmental health perspectives 95: 101–4. doi:10.1289/ehp.9195101. PMC 1568408. PMID 1821362.
  41. ↑ McGwin, G; Lienert, J; Kennedy, JI (November 2009). "Formaldehyde Exposure and Asthma in Children: A Systematic Review". Environmental health perspectives (Environmental Health Perspectives) 118 (3): 313–7. doi:10.1289/ehp.0901143. PMC 2854756. PMID 20064771.
  42. ↑ 42.0 42.1 42.2 Xiaojiang, Tang; Y., Bai; A., Duong; M.T., Smith; L., Li; L., Zhang (November 2009). "Formaldehyde in China: Production, Consumption, Exposure Levels, and Health Effects". 35 (8). Environmental International. pp. 1210–1224.
  43. ↑ "Role of mitochondrial processes in the development and aging of organism. Aging and cancer" (PDF). Deposited Doc., VINITI 2172-78. 1978. p. 48
  44. ↑ "IARC Monographs on the Evaluation of Carcinogenic Risks to Humans Volume 88 (2006) Formaldehyde, 2-Butoxyethanol and 1-tert-Butoxypropan-2-ol" (PDF, HTML). WHO Press, 2006( English )
  45. ↑ 45.0 45.1 "Formaldehyde and Cancer Risk".
  46. ↑ Zhang, Luoping; Steinmaus, Craig; Eastmond, Eastmond; Xin, Xin; Smith, Smith (March–June 2009). "Formaldehyde exposure and leukemia: A new meta-analysis and potential mechanisms" (PDF). Mutation Research/Reviews in Mutation Research (Mutation Research/Reviews in Mutation Research) 681 (2–3): 150–168. doi:10.1016/j.mrrev.2008.07.002. PMID 18674636. Retrieved 2013-05-22.
  47. ↑ "Formaldehyde and Leukemia: Epidemiology, Potential Mechanisms, and Implications for Risk Assessment" 51. Environmental and Molecular Mutagenesis. 2010. pp. 181–191. doi:10.1002/em.20534.
  48. ↑ "What are the key statistics about nasopharyngeal cancer?".
  49. ↑ Turner JH, Reh DD (June 2012). "Incidence and survival in patients with sinonasal cancer: a historical analysis of population-based data". Head Neck 34 (6): 877–85. doi:10.1002/hed.21830. PMID 22127982.
  50. ↑ "What are the key statistics about chronic myeloid leukemia?".
  51. ↑ "What are the key statistics about acute myeloid leukemia?".
  52. ↑ 52.0 52.1 "What are the risk factors for nasopharyngeal cancer?".
  53. ↑ "What are the risk factors for acute myeloid leukemia?".
  54. ↑ "What are the risk factors for chronic myeloid leukemia?".
  55. ↑ Dales, R; Liu, L; Wheeler, AJ; Gilbert, NL (July 2008). "Quality of indoor residential air and health". Canadian Medical Association Journal (Canadian Medical Association Journal) 179 (2): 147–52. doi:10.1503/cmaj.070359. PMC 2443227. PMID 18625986.
  56. ↑ "Testing for Indoor Air Quality, Baseline IAQ, and Materials". Environmental Protection Agency.
  57. ↑ Residential Indoor Air Formaldehyde Testing Program: A Pilot Study," M. Koontz, et al, prepared for U.S. EPA, 1996
  58. ↑ Evans, Ben (2008-04-11). "FEMA limits formaldehyde in trailers". Boston.com. Retrieved 2008-09-04.
  59. ↑ Zug KA, Warshaw EM, Fowler JF Jr, Maibach HI, Belsito DL, Pratt MD, Sasseville D, Storrs FJ, Taylor JS, Mathias CG, Deleo VA, Rietschel RL, Marks J. Patch-test results of the North American Contact Dermatitis Group 2005–2006. Dermatitis. 2009 May–Jun;20(3):149-60.
  60. ↑ "Formaldehyde allergy". DermNet NZ. New Zealand Dermatological Society. June 2009. Retrieved 2009-09-01.
  61. ↑ 61.0 61.1 De Groot, Anton C; Flyvholm, Mari-Ann; Lensen, Gerda; Menné, Torkil; Coenraads, Pieter-Jan (2009). "Formaldehyde-releasers: relationship to formaldehyde contact allergy. Contact allergy to formaldehyde and inventory of formaldehyde-releasers". Contact Dermatitis 61 (2): 63–85. doi:10.1111/j.1600-0536.2009.01582.x. PMID 19706047.
  62. ↑ Formaldehyde CAS 50-00-0 (PDF)
  63. ↑ Formaldehyde and Facts About Health Effects (PDF). Formaldehyde Epidemiology, Toxicology and Environmental Group. August 2002. Accessed on April 25, 2010.
  64. ↑ When Sampling Formaldehyde, The Medium Matters
  65. ↑ NIOSH Pocket Gide to Chemical Hazards: Formaldehyde
  66. ↑ Addendum to the 12th Report on Carcinogens (PDF) National Toxicology Program, U.S. Department of Health and Human Services, retrieved 06-13-2011
  67. ↑ "European Union Bans formaldehyde/formalin within Europe" (PDF). European Commission's Environment Directorate-General. September 2007. pp. 1–3. Retrieved 19 May 2012.
  68. ↑ "ESIS (European Chemical Substances Information System)". European Commission Joint Research Centre Institute for Health and Consumer Protection. February 2009. Retrieved 19 May 2012.
  69. ↑ "S.1660 – Formaldehyde Standards for Composite Wood Products Act". OpenCongress. July 2010. Retrieved 19 May 2012.
  70. ↑ "Health Canada – Proposed residential indoor air quality guidelines for formaldehyde". Health Canada. April 2007.
  71. ↑ CFC.gov (PDF)
  72. ↑ Formaldehyde Levels in FEMA-Supplied Trailers (PDF)
  73. ↑ Mike Brunker (2006-07-25). "Are FEMA trailers 'toxic tin cans'?". MSNBC. Retrieved 19 May 2012.
  74. ↑ ATSDR – Minimal Risk Levels for Hazardous Substances (MRLs)
  75. ↑ FEMA: CDC Releases Results Of Formaldehyde Level Tests
  76. ↑ Kunzelman, Michael (2007-08-08). "Suit Filed Over FEMA Trailer Toxins". The Washington Post. Retrieved 2010-05-02.
  77. ↑ Megan Terlecky (2008-10-24). "How We Tested for Formaldehyde". KGAN-TV.
  78. ↑ Nigel Duara (2008-10-21). "FEMA disputes formaldehyde study of Iowa trailers". Associated Press.
  79. ↑ Cindy Hadish (2008-10-24). "FEMA meets with mobile home residents over health concerns". Cedar Rapids Gazette.
  80. ↑ "Formaldehyde-laced foods reemerge in Indonesian markets". August 10, 2011.
  81. ↑ "Formaldehyde-Tainted Rice Drinks Found at Carrefour Markets". August 22, 2011.
  82. ↑ "BPOM Uncovers Two Formaldehyde-Tainted Noodle Factories in Bogor". October 12, 2014.
  83. ↑ Xiaojiang Tang et al., "Formaldehyde in China: Production, consumption, exposure levels, and health effects (PDF)", Environment International 35 (2009): 1215–16, and other references cited on p. 1216; see also "Municipality sees red over bad blood processing" (2011-03-18, China Daily, online English edition; retrieved on May 17, 2011).
  84. ↑ Moise Ngwa (2010-10-25). "formaldehyde testing" (PDF). Cedar Rapids Gazette. Retrieved 19 May 2012.
  85. ↑ "Was Death in the Milk?". The Indianapolis News. July 31, 1900. p. 5. Retrieved August 20, 2014 – via Newspapers.com.
  86. ↑ "Wants New Law Enacted. Food Inspector Farnsworth Would Have Use of Formaldehyde in Milk Stopped". The Topeka Daily Capital. August 30, 1903. p. 8. Retrieved August 20, 2014 – via Newspapers.com.
  87. ↑ Illegal business 'being run by a gang' - The Nation
  88. ↑ Import of formaldehyde fish from Pakistan foiled in Batam|The Jakarta Post
  89. ↑ Staff Correspondent, "Trader Fined for Selling Fish Treated with Formalin," Bangladesh2day, September 1, 2009
  90. ↑ http://en.ntvbd.com/bangladesh/923/Formalin-Control-Bill-2015-passed

External links

Wikisource has the text of the 1911 Encyclopædia Britannica article Formalin.