FE-Schrift

FE-Schrift

Category	Sans-serif
Designer(s)	Karlgeorg Hoefer
Foundry	Bundesanstalt für Straßenwesen
Sample

A demonstration of attempted alteration of characters set in the FE-Schrift typeface. The series "PBF" (top row) is modified to read "R3E" (middle row, in red). The correct appearance of the series "R3E" is shown in the bottom row.

Fälschungserschwerende Schrift (forgery-impeding typeface) or FE-Schrift^[1] has been the only typeface used on new vehicle registration plates of Germany since November 2000,^[2] except for plates issued to military-registered vehicles, which still use the former DIN 1451 typeface. The abbreviation "FE" is derived from the compound German adjective "fälschungserschwerend" combining the noun "Fälschung" (falsification) and the verb "erschweren" (to hinder).

The motivation for the creation of the typeface was spun in the late 1970s in the light of Red Army Faction terrorism when it was discovered that with the then-standard font for vehicle registration plates—the DIN 1451 font—it was particularly easy to modify letters by applying a small amount of black paint or tape. For example, it was easy to change a "P" to an "R" or "B", a "3" to an "8", or an "L" or "F" to an "E". Modifications to FE-font plates are somewhat more difficult, as they also require the use of white paint, which is easily distinguished at a distance from the retroreflective white background of the plate, in particular at night.

The original design for the FE-Schrift typeface was created by Karlgeorg Hoefer who was working for the Bundesanstalt für Straßenwesen (Federal Highway Research Institute of Germany) at the time. The typeface was slightly modified according to the results of tests that lasted from 1978 to 1980 at the University of Giessen (Dept. of Physiology and Cybernetic Psychology).^[3] Whilst the DIN typeface was using a proportional font, the FE-Schrift is a monospaced font (with different spacing for letters and numbers) for improved machine readability. Faked FE-Schrift letters (e.g., "P" to "R") appear conspicuously disproportionate.

The final publication in German law for the usage on license plates includes three variants - normal script ("Mittelschrift" - 75 mm high and 47.5 mm wide letters and 44.5 mm wide digits), narrow script ("Engschrift" - 75 mm high and 40.5 mm wide letters and 38.5 wide digits) and a small script ("verkleinerte Mittelschrift" - 49 mm high and 31 mm wide letters and 29 mm wide digits).^[2] The legal typeface includes umlaut vowels as these occur in German county codes at the start of the license plate number.^[4] The narrow font allows nine characters to be put on a standard Euro license plate — shorter numbers are supposed to be printed with larger spaces between characters as to fill the available space on the plate.

Adoption process

• 

  Germany (since 1994)

• 

  Cyprus (since 2013)

• 

  Bosnia and Herzegovina

• 

  Cuba

• 

  Malta

• 

  South Africa

• 

  Uruguay

• 

  Australia - Victoria (vanity plate)

• 

  Namibia

• 

  Tanzania

When the FE-Schrift was finished in 1980 the pressure for its adoption had lessened already. Its distribution was furthered by another event being the introduction of the Euro license plate. Some federated states of Germany introduced the new design during 1994 and since 1 January 1995 it was introduced nationwide by a federal law that came to include the FE-Schrift as well as it had been in the planning since the 1970s. The shift in legislation matches with the first Schengen zone to lift borders during 1995. With the extension of the Schengen zone in 1998 the new license plate design found EU-wide acceptance (even for non-Schengen countries) thereby lifting the older requirement of adding an extra country code plate on the car when roaming to other countries which constitutes an advantage to citizens. Shortly later the option to be issued an old (non-Euro) license plate design were dropped on 1 November 2000 and the legislation dropped the older typeface for license plates alongside. The FE-Schrift is mandatory in Germany since that time although older license plates continue to be valid and there are exceptions for historic cars that can still get a new license plate in the DIN typeface.

Other countries have begun to introduce a false-hindering script as well either taking over the FE-Schrift or using a derivate variant.

• Bosnia and Herzegovina - in 2009 the new Euro-style license plate design was introduced along with the FE-Schrift typeface. The new design (dropping the national crest from the old Euro-style license plates as it was used since 1998) is more similar to the Euro license plate.
• Cuba Current Cuban plates have the Euro format and use FE-Schrift.
• Cyprus - since 3 June 2013
• Malta - a Euro-style license plate design was introduced in 1995 and after the official accession to the EU in 2004 the new Euro license plates were standardized on the FE-Schrift.
• Moldova - since 1 April 2015
• Sri Lanka
• South Africa - the numbering scheme and license plate design were changed in 1994 which did also introduce the FE-Schrift.
• South Sudan
• Tanzania, Namibia, Zambia, Cameroon, Sierra Leone, Botswana, Mali, Ethiopia, Guinea, Malawi, Zimbabwe, Rwanda, Mozambique, Uganda - other African countries followed with Tanzania to use the FE-Schrift since the 1990s already.
• Uruguay - the old numbering scheme with three digits was exhausted in 2001 leading to a new scheme in 2002 in Montevideo which did not only include four digits but the new design came to use the FE-Schrift as well. The new license plate design is mandatory for Uruguay since 2011.
• Uzbekistan - since 1. October 2008.
• Chile - since April 2014.

Some countries allow the FE-Schrift as an alternative to the standard typeface especially in combination with a Euro-style license plate. This is used often for vanity plates for German car models, e.g. in Australia.

See also

• Vehicle registration plate
• German car number plates
• Country tag

References