Erosion

An actively eroding rill on an intensively-farmed field in eastern Germany

In geomorphology and geology, erosion is the action of exogenic processes (such as water flow or wind) which remove soil and rock from one location on the Earth's crust, then transport it to another location where it is deposited. Eroded sediment may be transported just a few millimetres, or for thousands of kilometres.

While erosion is a natural process, human activities have increased by 10-40 times the rate at which erosion is occurring globally. Excessive (or accelerated) erosion causes both 'on-site' and 'off-site' problems. On-site impacts include decreases in agricultural productivity and (on natural landscapes) ecological collapse, both because of loss of the nutrient-rich upper soil layers. In some cases, the eventual end result is desertification. Off-site effects include sedimentation of waterways and eutrophication of water bodies, as well as sediment-related damage to roads and houses. Water and wind erosion are the two primary causes of land degradation; combined, they are responsible for about 84% of the global extent of degraded land, making excessive erosion one of the most significant environmental problems world-wide.^[1][2]

Intensive agriculture, deforestation, roads, anthropogenic climate change and urban sprawl are amongst the most significant human activities in regard to their effect on stimulating erosion.^[3] However, there are many prevention and remediation practices that can curtail or limit erosion of vulnerable soils.

A natural arch produced by the wind erosion of differentially weathered rock in Jebel Kharaz, Jordan.

A wave-like sea cliff produced by coastal erosion, in Jinshitan Coastal National Geopark, Dalian, Liaoning Province, China.

Physical processes

Rainfall and surface runoff

Soil and water being splashed by the impact of a single raindrop.

Rainfall, and the surface runoff which may result from rainfall, produces four main types of soil erosion: splash erosion, sheet erosion, rill erosion, and gully erosion. Splash erosion is generally seen as the first and least severe stage in the soil erosion process, which is followed by sheet erosion, then rill erosion and finally gully erosion (the most severe of the four).^[4][5]

In splash erosion, the impact of a falling raindrop creates a small crater in the soil,^[6] ejecting soil particles. The distance these soil particles travel can be as much as 0.6 m (two feet) vertically and 1.5 m (five feet) horizontally on level ground.

If the soil is saturated, or if the rainfall rate is greater than the rate at which water can infiltrate into the soil, surface runoff occurs. If the runoff has sufficient flow energy, it will transport loosened soil particles (sediment) down the slope.^[7] Sheet erosion is the transport of loosened soil particles by overland flow.^[7]

A spoil tip covered in rills and gullies due to erosion processes caused by rainfall: Rummu, Estonia

Rill erosion refers to the development of small, ephemeral concentrated flow paths which function as both sediment source and sediment delivery systems for erosion on hillslopes. Generally, where water erosion rates on disturbed upland areas are greatest, rills are active. Flow depths in rills are typically of the order of a few centimeters (about an inch) or less and along-channel slopes may be quite steep. This means that rills exhibit hydraulic physics very different from water flowing through the deeper, wider channels of streams and rivers.^[8]

Gully erosion occurs when runoff water accumulates and rapidly flows in narrow channels during or immediately after heavy rains or melting snow, removing soil to a considerable depth.^[9][10][11]

Rivers and streams

Dobbingstone Burn, Scotland—This photo illustrates two different types of erosion affecting the same place. Valley erosion is occurring due to the flow of the stream, and the boulders and stones (and much of the soil) that are lying on the edges are glacial till that was left behind as ice age glaciers flowed over the terrain.

Valley or stream erosion occurs with continued water flow along a linear feature. The erosion is both downward, deepening the valley, and headward, extending the valley into the hillside, creating head cuts and steep banks. In the earliest stage of stream erosion, the erosive activity is dominantly vertical, the valleys have a typical V cross-section and the stream gradient is relatively steep. When some base level is reached, the erosive activity switches to lateral erosion, which widens the valley floor and creates a narrow floodplain. The stream gradient becomes nearly flat, and lateral deposition of sediments becomes important as the stream meanders across the valley floor. In all stages of stream erosion, by far the most erosion occurs during times of flood, when more and faster-moving water is available to carry a larger sediment load. In such processes, it is not the water alone that erodes: suspended abrasive particles, pebbles and boulders can also act erosively as they traverse a surface, in a process known as traction.^[12]

Bank erosion is the wearing away of the banks of a stream or river. This is distinguished from changes on the bed of the watercourse, which is referred to as scour. Erosion and changes in the form of river banks may be measured by inserting metal rods into the bank and marking the position of the bank surface along the rods at different times.^[13]

Thermal erosion is the result of melting and weakening permafrost due to moving water.^[14] It can occur both along rivers and at the coast. Rapid river channel migration observed in the Lena River of Siberia is due to thermal erosion, as these portions of the banks are composed of permafrost-cemented non-cohesive materials.^[15] Much of this erosion occurs as the weakened banks fail in large slumps. Thermal erosion also affects the Arctic coast, where wave action and near-shore temperatures combine to undercut permafrost bluffs along the shoreline and cause them to fail. Annual erosion rates along a 100-kilometre (62-mile) segment of the Beaufort Sea shoreline averaged 5.6 metres (18 feet) per year from 1955 to 2002.^[16]

Coastal erosion

Wave cut platform caused by erosion of cliffs by the sea, at Southerndown in South Wales.

Shoreline erosion, which occurs on both exposed and sheltered coasts, primarily occurs through the action of currents and waves but sea level (tidal) change can also play a role.

Hydraulic action takes place when air in a joint is suddenly compressed by a wave closing the entrance of the joint. This then cracks it. Wave pounding is when the sheer energy of the wave hitting the cliff or rock breaks pieces off. Abrasion or corrasion is caused by waves launching seaload at the cliff. It is the most effective and rapid form of shoreline erosion (not to be confused with corrosion). Corrosion is the dissolving of rock by carbonic acid in sea water. Limestone cliffs are particularly vulnerable to this kind of erosion. Attrition is where particles/seaload carried by the waves are worn down as they hit each other and the cliffs. This then makes the material easier to wash away. The material ends up as shingle and sand. Another significant source of erosion, particularly on carbonate coastlines, is the boring, scraping and grinding of organisms, a process termed bioerosion.^[17]

Sediment is transported along the coast in the direction of the prevailing current (longshore drift). When the upcurrent amount of sediment is less than the amount being carried away, erosion occurs. When the upcurrent amount of sediment is greater, sand or gravel banks will tend to form as a result of deposition. These banks may slowly migrate along the coast in the direction of the longshore drift, alternately protecting and exposing parts of the coastline. Where there is a bend in the coastline, quite often a buildup of eroded material occurs forming a long narrow bank (a spit). Armoured beaches and submerged offshore sandbanks may also protect parts of a coastline from erosion. Over the years, as the shoals gradually shift, the erosion may be redirected to attack different parts of the shore.

Glaciers

Glacial moraines above Lake Louise, in Alberta, Canada.

Glaciers erode predominantly by three different processes: abrasion/scouring, plucking, and ice thrusting. In an abrasion process, debris in the basal ice scrapes along the bed, polishing and gouging the underlying rocks, similar to sandpaper on wood. Glaciers can also cause pieces of bedrock to crack off in the process of plucking. In ice thrusting, the glacier freezes to its bed, then as it surges forward, it moves large sheets of frozen sediment at the base along with the glacier. This method produced some of the many thousands of lake basins that dot the edge of the Canadian Shield. The erosion caused by glaciers worldwide erodes mountains so effectively that the term glacial buzz-saw has become widely used, which describes the limiting effect of glaciers on the height of mountain ranges.^[18] As mountains grow higher, they generally allow for more glacial activity (especially in the accumulation zone above the glacial equilibrium line altitude),^[19] which causes increased rates of erosion of the mountain, decreasing mass faster than isostatic rebound can add to the mountain.^[20] This provides a good example of a negative feedback loop. Ongoing research is showing that while glaciers tend to decrease mountain size, in some areas, glaciers can actually reduce the rate of erosion, acting as a glacial armor.^[18]

These processes, combined with erosion and transport by the water network beneath the glacier, leave moraines, drumlins, ground moraine (till), kames, kame deltas, moulins, and glacial erratics in their wake, typically at the terminus or during glacier retreat.

Floods

At extremely high flows, kolks, or vortices are formed by large volumes of rapidly rushing water. Kolks cause extreme local erosion, plucking bedrock and creating pothole-type geographical features called Rock-cut basins. Examples can be seen in the flood regions result from glacial Lake Missoula, which created the channeled scablands in the Columbia Basin region of eastern Washington.^[21]

Freezing and thawing

Cold weather causes water trapped in tiny rock cracks to freeze and expand, breaking the rock into several pieces. This can lead to gravity erosion on steep slopes. The scree which forms at the bottom of a steep mountainside is mostly formed from pieces of rock (soil) broken away by this means. It is a common engineering problem wherever rock cliffs are alongside roads, because morning thaws can drop hazardous rock pieces onto the road.

Wind erosion

Árbol de Piedra, a rock formation in the Altiplano, Bolivia sculpted by wind erosion.

Wind erosion is a major geomorphological force, especially in arid and semi-arid regions. It is also a major source of land degradation, evaporation, desertification, harmful airborne dust, and crop damage—especially after being increased far above natural rates by human activities such as deforestation, urbanization, and agriculture.^[22][23]

Wind erosion is of two primary varieties: deflation, where the wind picks up and carries away loose particles; and abrasion, where surfaces are worn down as they are struck by airborne particles carried by wind. Deflation is divided into three categories: (1) surface creep, where larger, heavier particles slide or roll along the ground; (2) saltation, where particles are lifted a short height into the air, and bounce and saltate across the surface of the soil; and (3) suspension, where very small and light particles are lifted into the air by the wind, and are often carried for long distances. Saltation is responsible for the majority (50-70%) of wind erosion, followed by suspension (30-40%), and then surface creep (5-25%).^[24][25]

Wind erosion is much more severe in arid areas and during times of drought. For example, in the Great Plains, it is estimated that soil loss due to wind erosion can be as much as 6100 times greater in drought years than in wet years.^[26]

Mass movement

Wadi in Makhtesh Ramon, Israel, showing gravity collapse erosion on its banks.

Mass movement is the downward and outward movement of rock and sediments on a sloped surface, mainly due to the force of gravity.^[27][28]

Mass movement is an important part of the erosional process, and is often the first stage in the breakdown and transport of weathered materials in mountainous areas.^[29] It moves material from higher elevations to lower elevations where other eroding agents such as streams and glaciers can then pick up the material and move it to even lower elevations. Mass-movement processes are always occurring continuously on all slopes; some mass-movement processes act very slowly; others occur very suddenly, often with disastrous results. Any perceptible down-slope movement of rock or sediment is often referred to in general terms as a landslide. However, landslides can be classified in a much more detailed way that reflects the mechanisms responsible for the movement and the velocity at which the movement occurs. One of the visible topographical manifestations of a very slow form of such activity is a scree slope.

Slumping happens on steep hillsides, occurring along distinct fracture zones, often within materials like clay that, once released, may move quite rapidly downhill. They will often show a spoon-shaped isostatic depression, in which the material has begun to slide downhill. In some cases, the slump is caused by water beneath the slope weakening it. In many cases it is simply the result of poor engineering along highways where it is a regular occurrence.

Surface creep is the slow movement of soil and rock debris by gravity which is usually not perceptible except through extended observation. However, the term can also describe the rolling of dislodged soil particles 0.5 to 1.0 mm (0.02 to 0.04 in) in diameter by wind along the soil surface.

Exfoliation

Exfoliation is a type of erosion that occurs when a rock is rapidly heated up by the sun. This results in the expansion of the rock. When the temperature decreases again, the rock contracts, causing pieces of the rock to break off. Exfoliation occurs mainly in deserts due to the high temperatures during the day and cold temperatures at night.^[30]

Lightning strikes

When water in cracked rock is rapidly heated by a lightning strike, the resulting steam explosion can cause rock disintegration and shift boulders. It may be a significant factor in erosion of tropical and subtropical mountains that have never been glaciated. Evidence of lightning strikes include craters, partially melted rock and erratic magnetic fields.^[31]

Factors affecting erosion rates

Climate

The amount and intensity of precipitation is the main climatic factor governing soil erosion by water. The relationship is particularly strong if heavy rainfall occurs at times when, or in locations where, the soil's surface is not well protected by vegetation. This might be during periods when agricultural activities leave the soil bare, or in semi-arid regions where vegetation is naturally sparse. Wind erosion requires strong winds, particularly during times of drought when vegetation is sparse and soil is dry (and so is more erodible). Other climatic factors such as average temperature and temperature range may also affect erosion, via their effects on vegetation and soil properties. In general, given similar vegetation and ecosystems, areas with more precipitation (especially high-intensity rainfall), more wind, or more storms are expected to have more erosion.

In some areas of the world (e.g. the mid-western USA), rainfall intensity is the primary determinant of erosivity, with higher intensity rainfall generally resulting in more soil erosion by water. The size and velocity of rain drops is also an important factor. Larger and higher-velocity rain drops have greater kinetic energy, and thus their impact will displace soil particles by larger distances than smaller, slower-moving rain drops.^[32]

In other regions of the world (e.g. western Europe), runoff and erosion result from relatively low intensities of stratiform rainfall falling onto previously saturated soil. In such situations, rainfall amount rather than intensity is the main factor determining the severity of soil erosion by water.^[33]

Soil structure and composition

Erosional gully in unconsolidated Dead Sea (Israel) sediments along the southwestern shore. This gully was excavated by floods from the Judean Mountains in less than a year.

The composition, moisture, and compaction of soil are all major factors in determining the erosivity of rainfall. Sediments containing more clay tend to be more resistant to erosion than those with sand or silt, because the clay helps bind soil particles together.^[34] Soil containing high levels of organic materials are often more resistant to erosion, because the organic materials coagulate soil colloids and create a stronger, more stable soil structure.^[35] The amount of water present in the soil before the precipitation also plays an important role, because it sets limits on the amount of water that can be absorbed by the soil (and hence prevented from flowing on the surface as erosive runoff). Wet, saturated soils will not be able to absorb as much rain water, leading to higher levels of surface runoff and thus higher erosivity for a given volume of rainfall.^[35][36] Soil compaction also affects the permeability of the soil to water, and hence the amount of water that flows away as runoff. More compacted soils will have a larger amount of surface runoff than less compacted soils.^[35]

Vegetative cover

Vegetation acts as an interface between the atmosphere and the soil. It increases the permeability of the soil to rainwater, thus decreasing runoff. It shelters the soil from winds, which results in decreased wind erosion, as well as advantageous changes in microclimate. The roots of the plants bind the soil together, and interweave with other roots, forming a more solid mass that is less susceptible to both water and wind erosion. The removal of vegetation increases the rate of surface erosion.^[37]

Topography

The topography of the land determines the velocity at which surface runoff will flow, which in turn determines the erosivity of the runoff. Longer, steeper slopes (especially those without adequate vegetative cover) are more susceptible to very high rates of erosion during heavy rains than shorter, less steep slopes. Steeper terrain is also more prone to mudslides, landslides, and other forms of gravitational erosion processes.^[38][39][40]

Human activities that increase erosion rates

Agricultural practices

Tilled farmland such as this is very susceptible to erosion from rainfall, due to the destruction of vegetative cover and the loosening of the soil during plowing.

Unsustainable agricultural practices are the single greatest contributor to the global increase in erosion rates.^[41] The tillage of agricultural lands, which breaks up soil into finer particles, is one of the primary factors. The problem has been exacerbated in modern times, due to mechanized agricultural equipment that allows for deep plowing, which severely increases the amount of soil that is available for transport by water erosion. Others include mono-cropping, farming on steep slopes, pesticide and chemical fertilizer usage (which kill organisms that bind soil together), row-cropping, and the use of surface irrigation.^[42][43] A complex overall situation with respect to defining nutrient losses from soils, could arise as a result of the size selective nature of soil erosion events. Loss of total phosphorus, for instance, in the finer eroded fraction is greater relative to the whole soil.^[44] Extrapolating this evidence to predict subsequent behaviour within receiving aquatic systems, the reason is that this more easily transported material may support a lower solution P concentration compared to coarser sized fractions.^[45] Tillage also increases wind erosion rates, by dehydrating the soil and breaking it up into smaller particles that can be picked up by the wind. Exacerbating this is the fact that most of the trees are generally removed from agricultural fields, allowing winds to have long, open runs to travel over at higher speeds.^[46] Heavy grazing reduces vegetative cover and causes severe soil compaction, both of which increase erosion rates.^[47]

Deforestation

In this clearcut, almost all of the vegetation has been stripped from surface of steep slopes, in an area with very heavy rains. Severe erosion occurs in cases such as this, causing stream sedimentation and the loss of nutrient rich topsoil.

In an undisturbed forest, the mineral soil is protected by a layer of leaf litter and an humus that cover the forest floor. These two layers form a protective mat over the soil that absorbs the impact of rain drops. They are porous and highly permeable to rainfall, and allow rainwater to slow percolate into the soil below, instead of flowing over the surface as runoff.^[48] The roots of the trees and plants^[49] hold together soil particles, preventing them from being washed away.^[48] The vegetative cover acts to reduce the velocity of the raindrops that strike the foliage and stems before hitting the ground, reducing their kinetic energy.^[50] However it is the forest floor, more than the canopy, that prevents surface erosion. The terminal velocity of rain drops is reached in about 8 metres (26 feet). Because forest canopies are usually higher than this, rain drops can often regain terminal velocity even after striking the canopy. However, the intact forest floor, with its layers of leaf litter and organic matter, is still able to absorb the impact of the rainfall.^[50][51]

Deforestation causes increased erosion rates due to exposure of mineral soil by removing the humus and litter layers from the soil surface, removing the vegetative cover that binds soil together, and causing heavy soil compaction from logging equipment. Once trees have been removed by fire or logging, infiltration rates become high and erosion low to the degree the forest floor remains intact. Severe fires can lead to significant further erosion if followed by heavy rainfall.^[52]

Globally one of the largest contributors to erosive soil loss in the year 2006 is the slash and burn treatment of tropical forests. In a number of regions of the earth, entire sectors of a country have been rendered unproductive. For example, on the Madagascar high central plateau, comprising approximately ten percent of that country's land area, virtually the entire landscape is sterile of vegetation, with gully erosive furrows typically in excess of 50 metres (160 ft) deep and 1 kilometre (0.6 miles) wide. Shifting cultivation is a farming system which sometimes incorporates the slash and burn method in some regions of the world. This degrades the soil and causes the soil to become less and less fertile.

Roads and urbanization

Urbanization has major effects on erosion processes—first by denuding the land of vegetative cover, altering drainage patterns, and compacting the soil during construction; and next by covering the land in an impermeable layer of asphalt or concrete that increases the amount of surface runoff and increases surface wind speeds.^[53] Much of the sediment carried in runoff from urban areas (especially roads) is highly contaminated with fuel, oil, and other chemicals.^[54] This increased runoff, in addition to eroding and degrading the land that it flows over, also causes major disruption to surrounding watersheds by altering the volume and rate of water that flows through them, and filling them with chemically polluted sedimentation. The increased flow of water through local waterways also causes a large increase in the rate of bank erosion.^[55]

Climate change

The warmer atmospheric temperatures observed over the past decades are expected to lead to a more vigorous hydrological cycle, including more extreme rainfall events.^[56] The rise in sea levels that has occurred as a result of climate change has also greatly increased coastal erosion rates.^[57][58]

Studies on soil erosion suggest that increased rainfall amounts and intensities will lead to greater rates of erosion. Thus, if rainfall amounts and intensities increase in many parts of the world as expected, erosion will also increase, unless amelioration measures are taken. Soil erosion rates are expected to change in response to changes in climate for a variety of reasons. The most direct is the change in the erosive power of rainfall. Other reasons include: a) changes in plant canopy caused by shifts in plant biomass production associated with moisture regime; b) changes in litter cover on the ground caused by changes in both plant residue decomposition rates driven by temperature and moisture dependent soil microbial activity as well as plant biomass production rates; c) changes in soil moisture due to shifting precipitation regimes and evapo-transpiration rates, which changes infiltration and runoff ratios; d) soil erodibility changes due to decrease in soil organic matter concentrations in soils that lead to a soil structure that is more susceptible to erosion and increased runoff due to increased soil surface sealing and crusting; e) a shift of winter precipitation from non-erosive snow to erosive rainfall due to increasing winter temperatures; f) melting of permafrost, which induces an erodible soil state from a previously non-erodible one; and g) shifts in land use made necessary to accommodate new climatic regimes.

Studies by Pruski and Nearing indicated that, other factors such as land use not considered, it is reasonable to expect approximately a 1.7% change in soil erosion for each 1% change in total precipitation under climate change.^[59]

Global environmental effects

World map indicating areas that are vulnerable to high rates of water erosion.

During the 17th and 18th centuries, Easter Island experienced severe erosion due to deforestation and unsustainable agricultural practices. The resulting loss of topsoil ultimately led to ecological collapse, causing mass starvation and the complete disintegration of the Easter Island civilization.^[60][61]

Due to the severity of its ecological effects, and the scale on which it is occurring, erosion constitutes one of the most significant global environmental problems we face today.^[2]

Land degradation

Water and wind erosion are now the two primary causes of land degradation; combined, they are responsible for 84% of degraded acreage.^[1]

Each year, about 75 billion tons of soil is eroded from the land—a rate that is about 13-40 times as fast as the natural rate of erosion.^[62] Approximately 40% of the world's agricultural land is seriously degraded.^[63] According to the United Nations, an area of fertile soil the size of Ukraine is lost every year because of drought, deforestation and climate change.^[64] In Africa, if current trends of soil degradation continue, the continent might be able to feed just 25% of its population by 2025, according to UNU's Ghana-based Institute for Natural Resources in Africa.^[65]

The loss of soil fertility due to erosion is further problematic because the response is often to apply chemical fertilizers, which leads to further water and soil pollution, rather than to allow the land to regenerate.^[66]

Sedimentation of aquatic ecosystems

Soil erosion (especially from agricultural activity) is considered to be the leading global cause of diffuse water pollution, due to the effects of the excess sediments flowing into the world's waterways. The sediments themselves act as pollutants, as well as being carriers for other pollutants, such as attached pesticide molecules or heavy metals.^[67]

The effect of increased sediments loads on aquatic ecosystems can be catastrophic. Silt can smother the spawning beds of fish, by filling in the space between gravel on the stream bed. It also reduces their food supply, and causes major respiratory issues for them as sediment enters their gills. The biodiversity of aquatic plant and algal life is reduced, and invertebrates are also unable to survive and reproduce. While the sedimentation event itself might be relatively short-lived, the ecological disruption caused by the mass die off often persists long into the future.^[68]

One of the most serious and long-running water erosion problems worldwide is in the People's Republic of China, on the middle reaches of the Yellow River and the upper reaches of the Yangtze River. From the Yellow River, over 1.6 billion tons of sediment flows into the ocean each year. The sediment originates primarily from water erosion in the Loess Plateau region of the northwest.

Airborne dust pollution

Soil particles picked up during wind erosion are a major source of air pollution, in the form of airborne particulates—"dust". These airborne soil particles are often contaminated with toxic chemicals such as pesticides or petroleum fuels, posing ecological and public health hazards when they later land, or are inhaled/ingested.^{[69][70][71][72]}

Dust from erosion acts to suppress rainfall and changes the sky color from blue to white, which leads to an increase in red sunsets. Dust events have been linked to a decline in the health of coral reefs across the Caribbean and Florida, primarily since the 1970s.^[73] Similar dust plumes originate in the Gobi desert, which combined with pollutants, spread large distances downwind, or eastward, into North America.^[74]

Tectonic effects

The removal by erosion of large amounts of rock from a particular region, and its deposition elsewhere, can result in a lightening of the load on the lower crust and mantle. This can cause tectonic or isostatic uplift in the region.^[75][76]

Monitoring, measuring and modeling erosion

Terracing is an ancient technique that can significantly slow the rate of water erosion on cultivated slopes.

Monitoring and modeling of erosion processes can help us better understand the causes, make predictions, and plan how to implement preventative and restorative strategies. However, the complexity of erosion processes and the number of areas that must be studied to understand and model them (e.g. climatology, hydrology, geology, chemistry, physics, etc.) makes accurate modelling quite challenging.^[77][78] Erosion models are also non-linear, which makes them difficult to work with numerically, and makes it difficult or impossible to scale up to making predictions about large areas from data collected by sampling smaller plots.^[79]

The most commonly used model for predicting soil loss from water erosion is the Universal Soil Loss Equation (USLE), which estimates the average annual soil loss A as:^[80]

A = RKLSCP

where R is the rainfall erosivity factor,^[81] K is the soil erodibility factor, L and S are topographic factors representing length and slope,^[82] C is the cover and management factor and P is the support practices factor.

A new soil erosion model named monitors soil erosion by a spatio-temporal index. G2 is a dynamic model, as it takes account of contemporary changes of rainfall erosivity and vegetation retention. Based on the empirical USLE-family models, it needs calibration for rainstorm erosivity, while vegetation retention is based on biophysical parameters derived with remote sensing.^[83] Erosion is measured and further understood using tools such as the micro-erosion meter (MEM) and the traversing micro-erosion meter (TMEM). The MEM has proved helpful in measuring bedrock erosion in various ecosystems around the world. It can measure both terrestrial and oceanic erosion. On the other hand, the TMEM can be used to track the expanding and contracting of volatile rock formations and can give a reading of how quickly a rock formation is deteriorating.

Prevention and remediation

A windbreak (the row of trees) planted next to an agricultural field, acting as a shield against strong winds. This reduces the effects of wind erosion, and provides many other benefits.

The most effective known method for erosion prevention is to increase vegetative cover on the land, which helps prevent both wind and water erosion.^[84] Terracing is an extremely effective means of erosion control, which has been practiced for thousands of years by people all over the world.^[85] Windbreaks (also called shelterbelts) are rows of trees and shrubs that are planted along the edges of agricultural fields, to shield the fields against winds.^[86] In addition to significantly reducing wind erosion, windbreaks provide many other benefits such as improved microclimates for crops (which are sheltered from the dehydrating and otherwise damaging effects of wind), habitat for beneficial bird species,^[87] carbon sequestration,^[88] and aesthetic improvements to the agricultural landscape.^[89][90] Traditional planting methods, such as mixed-cropping (instead of monocropping) and crop rotation have also been shown to significantly reduce erosion rates.^[91][92]

See also

Notes

Further reading

External links

• The Soil Erosion Site
• International Erosion Control Association
• Soil Erosion Data in the European Soil Portal
• USDA National Soil Erosion Laboratory
• The Soil and Water Conservation Society