Diehl AeroNautical XTC Hydrolight

XTC Hydrolight
Role Ultralight aircraft
National origin United States
Manufacturer Diehl AeroNautical
Status Production completed



The Diehl AeroNautical XTC Hydrolight is an American amphibious flying boat ultralight aircraft that was designed and produced by Diehl AeroNautical in the 1980s.[1]

Design and development

The XTC was the first amphibious flying boat to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 247 lb (112 kg). It features a cantilever mid-wing, a canard, dual vertical tails, a single-seat, open cockpit, re-positionable tricycle landing gear and a single engine in pusher configuration.[1]

The aircraft's hull is made from fiberglass, while the wing has a Kevlar-epoxy spar with its flying surfaces covered in bonded Mylar. Its 32 ft (9.8 m) span wing is located behind the cockpit. Some aircraft were delivered with optional enclosed cockpits for all-weather flying. The landing gear repositions clear of the hull for water landings and is sprung on all three wheels. The nose wheel is steerable. The control system is three-axis, with the canard for pitch, twin rudders for yaw and spoilers for roll control. The XTC is very aerodynamically clean and produces a 14:1 glide ratio. Strongly built, the aircraft is rated for +8/-8g.[1]

The standard engine supplied was the twin-cylinder, two-stroke, single ignition, horizontally opposed KFM 107 aircraft engine of 25 hp (19 kW).[1]

Operational history

In service many owners replaced the KFM 107 powerplant, as it left the aircraft underpowered, especially for water operations. Owners report that the XTC is pitch sensitive in flight.[1]

Specifications (XTC)

Data from Cliche[1]

General characteristics

Performance


References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-46. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4