Dempsey TD-3 Beta Lightning

The Dempsey TD-3 Beta Lightning is the second original homebuilt design from Thomas Dempsey.

Design and development

The TD-3 was built with the design goals of being strong, comfortable and fast. The twin boom, twin engine design was loosely based on the Lockheed P-38 Lightning planform.^[1]

The TD-3 Beta Lightning is a twin boom, twin engine, tricycle gear monoplane with side-by-side configuration seating. The wooden spar wings are fabric covered. The fuselage pod is all fiberglass. The landing gear mechanism is sourced from a Piper Aztec, with the retraction mechanism retracting rearward rather than forward as on the Aztec. Four wing fuel tanks are mounted internally. The fuselage and tail booms have a supported welded steel tube frame with aluminum stringers.^[1]

Specifications (TD-3 Beta Lightning)

Data from Sport Aviation

General characteristics

• Crew: 2
• Length: 21 ft (6.4 m)
• Wingspan: 30 ft (9.1 m)
• Height: 5 ft 6 in (1.68 m)
• Wing area: 109 sq ft (10.1 m²)
• Airfoil: NACA 65-415 tapering to a NACA 4412
• Empty weight: 1,896 lb (860 kg)
• Gross weight: 2,834 lb (1,285 kg)
• Fuel capacity: 72 U.S. gallons (270 L; 60 imp gal)
• Powerplant: 2 × Lycoming IO-320 horizontally-opposed piston aircraft engines, 160 hp (120 kW) each
• Propellers: 2-bladed Hartzell Propeller, 6 ft 0 in (1.83 m) diameter

Performance

• Maximum speed: 188 kn; 348 km/h (216 mph)
• Stall speed: 72 kn; 134 km/h (83 mph)
• Rate of climb: 3,000 ft/min (15 m/s)
• Wing loading: 26 lb/sq ft (130 kg/m²)

See also

Aircraft of comparable role, configuration and era

• Wing Derringer Two passenger twin engine.
• Rutan Boomerang Composite twin engine homebuilt

References