The DKW RT 125 of 1950
The RT 125 is a German two-stroke motorcycle made by DKW in Zschopau in the 1930s, IFA and MZ in the 1950s and early 1960s, and DKW in Ingolstadt in the 1950s and 1960s. "RT" stands for "Reichstyp" or "National Model".
In the 1930s DKW pioneered the Schnürle two-stroke loop scavenging process to dispense with the use of a deflector piston and improve efficiency of the combustion chamber. DKW also developed a highly efficient arrangement of transfer ports. These two features were included in the RT 125 to great commercial advantage. Competitor companies such as Adler and TWN copied the adoption of flat-topped pistons and strove to develop equally transfer port arrangements without infringing DKW's patent.
Copies and variants
Copies of the RT 125 were built by at least eight different entities in at least six countries.
Royal Enfield WD/RE
Royal Enfield WD/RE "Flying Flea"
In 1938, after the German government discovered that RS Stokvis en Zonen, the Dutch importer of DKW motorcycles, had Jewish directors, they forced DKW to remove their franchise from the company. The RT 100, a smaller version of the RT 125, had been popular in the Netherlands, and RS Stokvis en Zonen commissioned Royal Enfield to make a motorcycle just like the RT 100. The resulting motorcycle, the Royal Enfield RE, copied the frame and front suspension of the RT 100, but its engine did not use Schnürle loop scavenging because Royal Enfield did not know about the system. The engine size was increased to 125 cc to improve the power output. Few were made before production stopped in October 1939, when Royal Enfield converted its factory to war production.[1]
After a demonstration of the capability of the DKW RT 100, the War Department ordered a military version of the RE, designated the WD/RE, for use with airborne troops.[1] This version, nicknamed the "Flying Flea" featured rigid forks and folding footrests and controls, including handlebars. Because Royal Enfield could not provide enough WD/REs to satisfy the demands of the military, the James Cycle Co was commissioned to build the ML, a Villiers-powered version of the Flying Flea.[1] Royal Enfield and James both built civilian versions after the war.[1]
War reparations
After World War II the Soviet Union took plans, tooling and even several dozen personnel as war reparations to MMZ in Moscow (later transferred to MMVZ and SMZ) and to a factory in Kovrov, and produced copies of the RT 125 as the M1A Moskva and K-125 respectively. WFM of Poland made a modified version of the RT 125 (under SHL 125 and Sokół 125 brands), developed into 125/175 cc family motorcycles, produced until 1985. RT 125 plans were also taken to the United Kingdom where they became the basis of the BSA Bantam, and to the USA where they formed the basis of the Harley-Davidson "Hummer".
| RT 125-based motorcycles from war reparations |
|---|
| Sokół 125 motorcycle, made in Poland between 1947 and 1950 |
| SHL M04 motorcycle, made in Poland between 1948 and 1952 |
|
Postwar German production: DKW and MZ
After the Second World War, DKW's factories in Zschopau were in the Soviet occupation zone. As such, they were under the control of the Soviet Union until they were handed over to the government of East Germany. The factory continued production of the RT 125 under the MZ (Motorradwerk Zschopau) brand into the 1950s.[1]
Meanwhile, DKW had reorganized itself in Ingolstadt, where it began production of the RT 125W (for "West") in 1949. Variants of the RT 125W, usually with larger engines, were in production throughout the 1950s.[2]
| Postwar German RT 125s |
|---|
| DKW RT 125 W, a West German postwar version of the RT 125 |
| IFA/DKW 125 RT built in Zschopau, East Germany (1954-1956) |
| 1961 MZ RT 125/3 built in Zschopau, East Germany |
|
Yamaha YA-1
Main article:
Yamaha YA-1
Yamaha YA-1
In the 1950s, after reestablishing themselves as manufacturers of musical instruments, Nippon Gakki decided to use the manufacturing equipment left over from wartime production to make motorcycles. Since the copyright on the RT 125 had been voided by the Allies, the company reverse engineered it as the basis for their first motorcycle. Nippon Gakki formed the Yamaha Motor Company in 1955 to build their copy of the RT 125 as the Yamaha YA-1, which was in production from 1955 to 1958. The YA-1 inherited design characteristics of RT 125 and, due to its thin body and chestnut brown tank, was affectionately nicknamed the Aka-tombo (赤トンボ?, "Red Dragonfly")
.[3][4][5]
References
- ↑ 1.0 1.1 1.2 1.3 1.4 Henshaw, Peter (2008-06-15). "1: Origins". The BSA Bantam Bible. Veloce Publishing. pp. 12–15. ISBN 1-8458-4159-X. Retrieved 2012-08-04.
- ↑ Henshaw, Peter (2008-06-15). "1: Origins". The BSA Bantam Bible. Veloce Publishing. p. 11. ISBN 1-8458-4159-X. Retrieved 2012-08-04.
- ↑ Alexander, Jeffrey W. (Jan 31, 2009). Japan's Motorcycle Wars: An Industry History. UBC Press. pp. 151–154. ISBN 978-0-77481-454-6. Retrieved July 28, 2012.
- ↑ Walker, Mick (Nov 1, 2002). Mick Walker's Japanese Grand Prix Racing Motorcycles. Redline Books. pp. 153–154. ISBN 0-953-1311-8-1. Retrieved July 28, 2012.
- ↑ Suprayitno, Micky (Jan 7, 2013). "Classic: 1955 Yamaha 125YA-1". GoMick. Retrieved December 20, 2014.
