Culver PQ-14 Cadet

PQ-14
Culver PQ-14B at Langley, 1945
Role Target drone
Manufacturer Culver Aircraft Company
Designer Albert Mooney
Introduction 1942
Retired 1950
Primary users U.S. Army Air Corps
United States Navy
U.S. Army Air Force
United States Air Force
Number built 2,043
Developed from Culver PQ-8

The Culver PQ-14 Cadet is a modified version of the Culver LFA Cadet used as a target drone.

In 1940, the U.S. Army Air Corps drew up a requirement for a radio-controlled target drone for training anti-aircraft artillery gunners. The first aircraft in a series of target drones was a modification of the Culver LFA Cadet which eventually led to the PQ-14 series used throughout World War II and beyond.

Design and development

Culver proposed a modification of its civilian Model LFA Cadet which the Army purchased as the PQ-8. The success of the PQ-8 led to the development of the "NRD"; a single PQ-8 was converted to the new configuration and tested by the USAAF as the XPQ-14. Larger and faster than the PQ-8, the PQ-14 also had retractable landing gear and fuselage, wings and tail components made of wood with stressed plywood skin.

This prototype was followed by YPQ-14A service test aircraft and 1,348 PQ-14A production models. Of the latter, 1,198 were transferred to the US Navy, which designated them as TD2C-1 with the decidedly unattractive name Turkey.

The YPQ-14B was a slightly heavier variant; a total of 25 were produced before production shifted to the PQ-14B. A total of 594 PQ-14Bs served as target drones for the USAAF. A single PQ-14B was converted to use an O-300-9 engine and designated XPQ-14C. After World War II, the Culver company developed the XPQ-15 from their Model V light aircraft. After only four were delivered the company went bankrupt in 1946.

Operational history

A U.S. Navy TD2C-1 in flight, circa 1945.
A warbird PQ-14 at Borrego Springs Airport in 1991.

The XPQ-14 was first flown in 1942 and began to be received in training units shortly after. The aircraft was flown unmanned, controlled by radio, but was flown by a pilot for ferry flights, utililizing a rudimentary control panel installed for that purpose and using their parachutes as a seat. Docile and easy to fly, the aircraft was finished in a bright red target color scheme although operationally, a silver or red finish was applied. Without a pilot they were flown from a "mother ship" aircraft. The typical mother ship was a Beech C-45. Despite their short lifespan, the aircraft performed well and the Franklin engine was considered "trouble-free".[1]

Most of the Culver target aircraft were "blasted out of the sky" by Army anti-aircraft gunners but a dozen or more survived and were surplused after 1950. Flown as a recreational aircraft, their new owners found that the aircraft had a sprightly performance. One is preserved as a flying example at the Planes of Fame in Chino, California,[1] another is part of the collection at the National Museum of the United States Air Force and a third N5526A, that flew to airshows throughout the 1970s holding the last airworthiness certificate[2] is displayed at the Airpower Museum at Blakesburg, Iowa.

Specifications (Culver PQ-14A)

Data from [3]

General characteristics

Performance

See also

Related development

Culver PQ-8/Cadet


References

Notes

  1. ↑ 1.0 1.1 Mormillo 2001, p. 7.
  2. ↑ Air Trails, Winter 1971, p. 20.
  3. ↑ Mormillo 2001, p. 6.

Bibliography

  • Mondey, David. American Aircraft of World War II (Hamlyn Concise Guide). London: Bounty Books, 2006. ISBN 978-0-7537-1461-4.
  • Mormillo, Frank B. "Defenceless Warrior: Culver's PQ-14 Drone." Air Enthusiast Issue 93, May/June 2001.

External links

Wikimedia Commons has media related to Culver PQ-14/TD2C.