Corris Railway

Corris Railway
Rheilffordd Corris
Maespoeth Junction locomotive shed in the early 1980s, members of the Corris Railway Society at work restoring the line
Locale Mid-Wales
Terminus (Original) Machynlleth & Aberllefenni
(Current) Maespoeth & Corris
Commercial operations
Name Corris Railway Company
Built by Corris, Machynlleth & River Dovey Tramroad
Original gauge 2 ft 3 in (686 mm)
Preserved operations
Operated by Corris Railway Company Ltd, supported by Corris Railway Society
Stations 2
Length 0.75 Miles
Preserved gauge 2 ft 3 in (686 mm)
1859 Opened (horse-drawn)
1879 Converted to steam operation
1883 Commencement of steam-hauled passenger service
1930 Cessation of passenger service
1948 Closed
Preservation history
1966 Foundation of what became The Corris Railway Society
1970 Opening of Corris Railway Museum
1971 Building of demonstration line
1981 Purchase of Maespoeth shed
2002 Passenger services resumed
2005 Steam trains re-introduced

The Corris Railway (Welsh: Rheilffordd Corris) is a narrow gauge preserved railway based in Corris on the border between Merionethshire (now Gwynedd) and Montgomeryshire (now Powys) in Mid-Wales.

The line opened in 1859, and originally ran from Derwenlas, south east of Machynlleth north to Corris and on to Aberllefenni. Branches served the slate quarries at Corris Uchaf, Aberllefenni, the isolated quarries around Ratgoed and quarries along the length of the Dulas Valley.

The railway closed in 1948, but a preservation society was formed in 1966, initially opening a museum; a short section of line between Corris and Maespoeth was re-opened to passengers in 2002. The railway now operates as a tourist attraction. A new steam locomotive was built for the railway, which was delivered in 2005. The two surviving locomotives, plus some of the original rolling stock, are preserved on the nearby Talyllyn Railway.

The gauge of the railway is 2 ft 3 in (686 mm).

History

Tramroad era: 1850 to 1878

Proposals to construct a line to connect the slate quarries in the district around Corris, Corris Uchaf and Aberllefenni with wharves on the estuary of the Afon Dyfi at Derwenlas and Morben, south-west of Machynlleth, first appeared around 1850 with Arthur Causton as engineer. At this time slate from the quarries was hauled by horse-drawn carts and sledges to transport their output to the river. The proposed Corris, Machynlleth & River Dovey Railway would have run along Dulas Valley to the north shore of the Dyfi at Pant Eidal. This scheme was not constructed, and was followed by two further proposals during 1850. Following the plans for a standard gauge railway along the Dyfi valley, these early proposals were shelved.[1]

On 12 July 1858 the Corris Machynlleth & River Dovey Tramroad (CM&RDT) was formed, and immediately began construction on a 2 ft 3 in (686 mm) gauge railway. The first train ran on 1 April 1859.[2] Locomotives were forbidden from use, so the railway was worked using horses and gravity.[1]

On 3 January 1863 the standard gauge Newtown and Machynlleth Railway opened, followed on 1 July of the same year by the line from Machynlleth to Borth of the Aberystwyth and Welsh Coast Railway. These two lines had become part of the Cambrian Railways by August 1865. The opening of the standard gauge line to Borth made the section of the CM&RDT from Machynlleth to Morben obsolete. It was much easier to transship slates to the main line at Machynlleth, so the lower section of the tramway was abandoned.[3]

With the arrival of the standard gauge, the CM&RDT saw the chance to greatly expand their operation. They applied, on 13 November 1863 to convert the tramroad to a railway, adopt steam locomotives and formally close the section between Machynlleth and Derwenlas.[4] On 25 July 1864 an Act of Parliament was passed changing the name to the Corris Railway Company and permitting the use of locomotives on the line. It appears that around this time the line was under the control of Thomas Savin, the contractor who built the standard gauge lines in the area.[5]

It took until the 1870s for work to begin to upgrade the Corris Railway to a standard where locomotives could be used. The original tramroad was laid with light bridge rail suitable for waggons to traverse as they were pulled by horses. These rails would not support the weight of much heavier steam locomotives. In 1878 control of the railway passed to the Imperial Tramways Company of London. The new owners saw the potential for passenger traffic on the Corris Railway and ordered the first passenger carriages for the railway, even though the Act of 1864 did not permit passengers to be carried.[6] They also appointed Joseph R. Dix, son of the main-line stationmaster at Machynlleth, as Manager in successor to David Owen.

The Dix Years: 1879 to 1906

Horse-drawn charabancs owned by the Corris Railway pass Tal-y-llyn Lake on the "Grand Tour"

In 1880 and 1883, two new Acts were obtained which adjusted the tolls on the railway and permitted the carriage of passengers. The second of these Acts was necessary because the owners of the quarries served by the railway objected that passenger trains would interfere with their mineral traffic. Initially the railway ran a test passenger service on the local roads; this proved to be so popular that they were able to pass the parliamentary act over the opposition of the quarry owners. It was also the first instance of a long history of the Corris Railway operating passenger road services in the area.[7]

In February 1879 three new steam locomotives purchased from the Hughes Locomotive Company arrived and began work. Although the carriages arrived in 1878 it was not until 1883 that the Act of Parliament was secured to allow the formal commencement of passenger services.[7] A semi-official passenger service had been running since the early 1870s using adapted waggons to convey quarry workers and visitors.

One of the original three locomotives with a train at Machynlleth in the 1890s

The line was now in its settled form and began to operate a full service under Dix's energetic management. The railway was widely promoted to visitors as the best route to Tal-y-llyn Lake and Cader Idris (ignoring the claims of the rival Talyllyn Railway). The initial passenger service ran from Machynlleth to Corris, with new stations at Esgairgeiliog and Llwyngwern opening in 1884. The track was upgraded beyond Corris so that passenger services could reach the line's northern terminus at Aberllefenni, with services starting on 25 August 1887, and in the same year stations were also opened at Ffridd Gate and Garneddwen.[7]

The railway developed a network of horse-hauled road services, including providing a link between Corris station and Abergynolwyn station on the Talyllyn Railway. This was promoted as part of a circular "Grand Tour" which took in the two narrow gauge railways and the Cambrian service between Tywyn and Machynlleth.

In 1892 control of Imperial Tramways moved to Bristol and George White of Bristol Tramways became chairman and Clifton Robinson became managing director.[8] In the 1900s Bristol motor buses were sent by the parent company to run the road services.

Decline: 1907 to 1930

Following a dispute with the directors Dix was dismissed and replaced by John J O'Sullivan (formerly of the Cork, Blackrock and Passage Railway). The closure of Braichgoch Quarry in 1906 brought the railway its first loss, and although the line continued on through subsequent decades, serving the quarries around Corris and Aberllefenni, it never again showed a profit. As well as slate and passengers, the line hauled timber extracted from the Dyfi forest in the 1910s through 1930s. There was also a constant traffic in coal and general goods to the quarries and communities served by the railway.

After World War I, the decline in slate traffic continued as cheaper foreign slate and alternative roofing materials became popular. O'Sullivan had died in office in 1917 and the new manager, Daniel J McCourt, took over after the war and was responsible for developing and extending the connecting bus services as partial compensation for the decline in rail traffic.

Takeover and nationalisation: 1931 to 1948

In 1930 Imperial Tramways sold the Corris to the Great Western Railway (who by that time were the owners of the main line serving Machynlleth) whose primary interest was taking control of the railway's bus routes. After running a bus in direct competition with the railway in 1930, the railway's passenger service was withdrawn at the beginning of 1931. In 1948 the line was nationalised along with its parent company as part of British Railways. Serious erosion to the railway formation caused by the Afon Dyfi led to closure later that year, the last train running on 20 August 1948. The track was lifted by the end of 1949.

In 1951, the nearby Talyllyn Railway, which shares the unusual 2 ft 3 in (686 mm) gauge, became the first railway in the world to be preserved. The Talyllyn purchased the two remaining locomotives, which had been stored out of use at Machynlleth, along with several goods waggons. In 1958, the Talyllyn also purchased one of the Corris carriages, which had been in use as a summerhouse in a garden in Gobowen.[9]

Preservation

The Corris Railway's own steam locomotive, No. 7, at Corris on 28 October 2006

In December 1966 a group of dedicated enthusiasts led by Alan Meaden, formed the Corris Railway Society with the aim of preserving what was left of the railway, opening a dedicated museum, and to explore the possibility of reviving some or all of the line. Many of the founding members of the Society were volunteers on the nearby Talyllyn Railway.

Other than at Aberllefenni and Braichgoch quarries, no rails remained in situ along the Corris route. Initially the Society sought to purchase Machynlleth station for its museum, but when this proved impossible it turned its sights elsewhere. The main buildings of Corris station were demolished in 1968 leaving only the adjacent railway stable block standing, and these buildings - badly in need of maintenance - were acquired, along with a short section of trackbed leading southwards. In 1970 the first part of the building was opened as the Corris Railway Museum. A short length of "demonstration" track was laid in 1971.

During the 1970s the Society undertook lengthy negotiations with the relevant authorities to establish the requirements for re-opening the line for passengers, while steadily building up funds and equipment. A new Corris Railway Company, reviving the original name, was incorporated to act as the Society's trading and operating arm, while the Society achieved charitable status. The Museum was extended as more of the building was returned to satisfactory condition.

In 1981 the line's original locomotive shed at Maespoeth was acquired and became the railway's operational base. During the 1980s light track was laid between Maespoeth and Corris, a distance of just under a mile (1.6 km). The formal "first train" back to Corris ran in 1985. In the following years the track was upgraded to passenger standards while negotiations with the authorities continued.

In the summer of 2002 passenger services resumed after a break of seventy-two years, initially diesel-hauled. The society has also built a new steam locomotive, to a design based on the Kerr Stuart No.4. This loco arrived on the railway on 17 May 2005 and runs as No.7 (the Corris Railway never officially named its locomotives). No. 7 went into service on 20 August 2005, fifty-seven years to the day since the last train on the original railway, and now hauls the regular passenger service between Corris and Maespoeth.

The railway is also actively pursuing a southwards extension towards Machynlleth, with the initial aim of extending the line to Tan-y-Coed, midway between Esgairgeiliog and Llwyngwern and some two and a half miles south of Corris. As always, this is involving lengthy negotiations with the authorities, not least due to the line south of Maespoeth running immediately adjacent to the A487 trunk road. While these are continuing the railway has consolidated its facilities at Maespoeth with the construction of a new two-road carriage shed in the adjacent field (the original carriage sheds at Corris and Machynlleth having been demolished).

During 2009 the railway marked the 150th anniversary of the first train on the Corris with a series of events, including demonstration horse-worked freight trains and gravity runs of rakes of waggons.

Locomotive No. 7 (left) and former Corris locomotive No. 4 Edward Thomas at Abergynolwyn on the Talyllyn Railway

The revived Corris Railway has maintained friendly links with the Talyllyn Railway, which resulted in both of the original Corris locos and rolling stock returning to the railway. In 1996 ex-Corris loco No. 4 returned to celebrate its 75th anniversary. In 2003 ex-Corris loco No. 3 returned on the occasion of its 125th anniversary with a heritage train of coach No 17, brake van No. 6 and two trucks. Corris No. 5 visited the Talyllyn Railway in 1983 and 1990,[10] and No. 7 in October 2011.[11] It hauled a few charter trains and played a part in the TR's Corris Weekend, when it ran with the two surviving ex Corris engines; No. 4 (Edward Thomas) and No. 3 (Sir Haydn) and stock.

Both the surviving original locomotives have visited the Corris since its reopening. In 2012 No. 3 featured in a steam Gala over May Bank Holiday weekend along with the railway's resident steam loco No. 7. No. 3's boiler ticket expired on 17 May 2012 and the loco was on static display at Maespoeth until February 2013 when the loco left the Corris to tour heritage railways and museums in the UK to raise awareness of the Talyllyn and to raise funds for its overhaul.

About the railway

Corris station track plan

The Corris Railway had several unusual features:

Route

Map of the Corris Railway

Stations and halts

Branch lines and tramways

The Corris Railway had numerous branch lines, mainly built to serve the slate quarries along its route. The principal branches were:

None of these branches were locomotive worked, instead being powered by gravity and horses. Other temporary branches were built to aid forestry works.

Quarries served

The principal reason for the existence of the Corris Railway was to serve the slate quarries of this district. Although usually referred to as quarries, those on the Narrow Vein were usually underground mine workings, following the course of the vein, while those on the Broad Vein were more usually opencast quarries. This list shows the main quarries that the railway served:

The railway also served Y Magnus (Matthew's Mill), a slate enamelling works situated between Aberllefenni and Garneddwen.

Locomotives

Original railway

The locomotives that ran on the original Corris Railway between 1878 and 1948 (none carried names on the Corris) :

Number Image Builder Type Works Number Built Notes Current Status Current location
1 Hughes Falcon Works 0-4-2 ST 324 1878 Originally built as an 0-4-0 ST, scrapped 1930 Scrapped N/A
2 Hughes Falcon Works 0-4-2 ST 322 1878 Originally built as an 0-4-0 ST, scrapped 1930 Scrapped N/A
3 Hughes Falcon Works 0-4-2 ST 323 1878 Originally built as an 0-4-0 ST, purchased by the Talyllyn Railway in 1951. On tour Engine House. Severn Valley Railway
4 Kerr Stuart 0-4-2 ST 4047 1921 Tattoo class locomotive, purchased by the Talyllyn Railway in 1951. Operational Talyllyn Railway

Preserved railway

Locomotives brought to the restored Corris Railway since 1967:

Number Image Name Builder Type Works Number Built Notes Current Status Passenger train certified (Air braked)
5 Alan Meaden Motor Rail Simplex 4wDM 22258 1965 Purchased in 1974, ex-Staveley Lime Products, Hindlow, Derbys. Formerly 2 ft (610 mm) gauge. Named in honour of the Society's founder. Operational No
6 Ruston and Hornsby 4wDH 518493 1966 Purchased in 1982, ex-BICC Prescot, Merseyside. Formerly 2 ft 6 in (762 mm)gauge. Operational Yes
7 Winson Engineering
and Drayton Designs
0-4-2 ST 17 2005 Built for the railway, based on the Kerr Stuart "Tattoo" class design of No. 4 Under Overhaul Yes
8 Hunslet 4wDM 7274 1973 Ex-Houghton Main Colliery, Barnsley. On long term loan from the National Coal Mining Museum Stored No
9 Aberllefenni[13] Clayton 4wBE B0457 1974 Ex-Aberllefenni Slate Quarry. Donated and named by Wincilate Ltd Stored No
10 Corris Railway 0-4-2 ST Under construction Based on the first three locomotives which first ran the line. Being built as funds are raised and expected to be complete within 5 to 10 years. Under construction N/A

Carriages

Preserved carriage CR no. 8 (TR no. 17) at the Talyllyn Railway, August 2005
Carriage no 21 at Maespoeth May 2007

The original railway had ten four-wheel, tramcar-like carriages, built at the Falcon Works, Loughborough, and numbered from 1 to 10, with a brake van from the same source taking the number 11. The first bogie carriage, also from Falcon, which looked like two four-wheel bodies mounted on a single chassis, received number 12, and the four-wheelers were rebuilt over a five-year period on new chassis to form five bogie vehicles. A re-numbering had the rebuilds as 1 to 5 and the former 12 becoming 6. Two all-new carriages to a similar design were built by the Metropolitan Railway Carriage and Wagon Company Ltd and numbered 7 & 8. Nos. 1 to 6 disappeared, presumed scrapped, after 1930, but 8 was rebuilt for use on the Talyllyn Railway as their No.17 while 7 is on display in the Corris Railway Museum. The brake van was also preserved on the Talyllyn but has been substantially rebuilt after being damaged in a fire.

So with eleven four-wheel vehicles and eight bogie vehicles having run on the railway, the Society has numbered its new carriages from 20 onwards.

Carriage 20 is similar in appearance to the bogie vehicles, but on a shorter, ex-National Coal Board four-wheel chassis. Carriage 21 has been designed to appear as similar as possible to the original 19th Century bogie vehicles, but constructed to 21st Century safety standards. Three more carriages similar to 21 are currently under construction at Maespoeth, numbered 22, 23 and 24; 22 and 24 will have clerestory roofs, similar to those carried by two original carriages in the 1920s.

When carriage 22 is completed the railway will be able to run an authentic-looking "1920s" train with the "Tattoo" loco and two bogie carriages.

See also

References

  1. 1.0 1.1 Boyd 1965, pages 20-21
  2. Railway Through Talerddig
  3. Boyd 1965, page 22
  4. Boyd 1965, page 23
  5. Corris Railway Society 1988
  6. Boyd 1965, page 24
  7. 7.0 7.1 7.2 Boyd 1965, pages 24-25
  8. Corris Railway Society Journal 1992 & 1993
  9. Bate, John; Mitchell, David; Adams, Nigel (2003). Narrow Gauge Railways in Profile No. 1: Talyllyn Railway Locomotives & Rolling Stock. Cheona Publications. p. 57. ISBN 1-900298-21-X.
  10. Bate, John (2001). The Chronicles of Pendre Sidings. RailRomances. p. 205. ISBN 1-900622-05-X.
  11. "Corris No 7 Visit - 7th and 8th October 2011". Talyllyn Railway. 8 October 2011. Retrieved 8 November 2011.
  12. Boyd 1965, page 36
  13. "Photo of battery loco no. 9". Retrieved 11 April 2010.

Bibliography

External links

Wikimedia Commons has media related to Corris Railway.

Coordinates: 52°38′50″N 3°50′35″W / 52.64728°N 3.84313°W