Colt M1861 Navy
Colt M1861 Navy | |
---|---|
Colt 1861 Navy Revolver, Second Generation | |
Type | Revolver |
Place of origin | United States |
Service history | |
In service | 1861 to circa 1873 |
Used by |
United States Confederate States Native Americans |
Wars |
American Civil War American Indian Wars |
Production history | |
Designer | Samuel Colt |
Manufacturer | Colt's Manufacturing Company |
Produced | 1861-1873 |
Number built | 38,000 |
Specifications | |
Weight | 42 oz (1190 g) |
Length | 13 in (330 mm) |
Barrel length | 7.5 in (190.5 mm) |
| |
Cartridge |
Paper-wrapped .36 caliber .38 Short Colt (Conversions) |
Caliber | 0.36 |
Action | Single action, cap and ball |
Muzzle velocity | 850 to 1,000 ft/s depending upon load |
Feed system | 6 round cylinder |
The Colt Model 1861 Navy cap & ball .36-caliber revolver was a six-shot, single-action percussion weapon produced by Colt's Manufacturing Company from 1861 until 1873. It incorporated the "creeping" or ratchet loading lever and round barrel of the .44-caliber Army Model of 1860 but had a barrel one half inch shorter, at 7.5 inches. Total production was 38,000 revolvers.[1][2]
Like its forerunner, the Colt 1851 Navy Revolver, it saw widespread use in the American Civil War and on the American Western frontier, though far fewer were produced. It has the same general specification as the earlier model, but with a rounded barrel and somewhat different rammer.[2] While similar in design to the Colt Army Model 1860, the lighter recoil of the 1861 Navy's .36 caliber was preferred by some cavalry soldiers.
There were few variations of the Model 1861 Navy Colt. Approximately 100 of the first guns made had fluted cylinders with no cylinder scene. Another 100, made between the serial ranges of 11,000 and 14,000 were cut for a shoulder stock — the lower portion of the recoil shield was milled away and a fourth screw for the stock was added to the frame. With the exception of the first fifty or so of this model, all guns had a capping groove. A brass trigger guard and back strap, silver plated, were standard.
During the Civil War its main competitor in England was the Adams self-cocking revolver. The Adams fired a .49 caliber bullet and did not require the shooter to pull the hammer back. Colt's revolver was more popular because Colt mass-produced his weapons while Adams' products were handmade by skilled artisans. In the United States, Colt's main rival was the Remington Model 1858 revolver.
The Colt 1861 Navy typically was used with paper cartridges, that is, with a cartridge consisting of nitrated paper, a pre-measured black powder charge, and a bullet that was either a lead round ball or a lead conical bullet. The nitrated paper of the cartridge was completely consumed upon use, and the use of paper cartridges enabled faster re-loading. Alternatively, it was always possible to load with measured powder charges and lead round balls.
See also
- Colt 1851 Navy Revolver
- Colt Army Model 1860
- Colt's Manufacturing Company
- Remington Model 1858
- Paper cartridge
References
- ↑ R.L. Wilson, Colt, an American Legend
- ↑ 2.0 2.1 Hogg, Ian V. (1987). Weapons of the Civil War. New York, New York: Military Press. p. 19. ISBN 0-517-63606-9.
External links
- The Colt Revolver in the American West—Presentation Model 1861 Navy
- The Colt Revolver in the American West—Cased Presentation Model 1861 Navy
- Smithsonian Article on the M1861 Navy
- Shooting Characteristics of the M1861 Navy
|