Clyde-class lifeboat

RNLBCity of Bristol (ON 1030)
now Gemini Explorer
Class overview
Builders: Yarrow & Co., Ltd. (70-001 & 70-002)
Bideford (70-003)
Operators: Royal National Lifeboat Institution
Cost: £64,000–£65,000 (first two)
£196,000 (third)
Built: 1965–6, 1974
In service: 1968–1988
Completed: 3
Retired: 3
General characteristics
Type:Motor lifeboat
Displacement:78–85 tons
Length:70–71 ft (21–22 m)
Beam:17–18 ft (5.2–5.5 m)
Draft:9 ft (2.7 m)
Installed power:Twin Gardner 8L3B 230bhp diesel engines
Propulsion:Twin screw
Speed:11.5 knots (13.2 mph)
Range:1,700 nautical miles (3,100 km)

The Clyde-class lifeboat was operated by the Royal National Lifeboat Institution (RNLI) from two of its stations in the United Kingdom, Kirkwall and Clovelly. Only 3 vessels were built for the RNLI, however a fourth vessel was built in the Netherlands to the same lines as 70-001 and 70-003 as a pilot boat for Trinity House.

History

Following a visit in the early sixties to lifeboat societies in the Netherlands and West Germany, which successfully employed cruising lifeboats, the RNLI's Management Committee decided to sanction the construction of two such boats for RNLI service. The first two boats went on trials in 1966 and in 1968 went on station at Clovelly and Kirkwall. The third boat was built as a relief but took over as station boat at Clovelly, with the first boat becoming the relief. It eventually became apparent that cruising type boats were not really suited to the RNLI's operations and the boats were used at their respective bases as normal lifeboats until withdrawal in 1988.

Description

The Clyde-class cruising lifeboat was the largest ever built for the RNLI and the first to have a steel hull. The first and second boats differed in hull design, ON 987 having a hull designed by the RNLI's Richard Oakley, 71 feet (22 m) long and with a beam of 18 feet (5.5 m), while the second boat, ON 988, had a hull designed by Irish naval architect John Tyrrell and was 70 feet (21 m) long and with a beam of 17 feet (5.2 m). Both boats had similar superstructure layouts, with a flying bridge. As crews were intended to live on board, berths and messing facilities were provided.

An inflatable inshore boat was carried forward of the wheelhouse. The boats were powered by two 230 bhp Gardner 8L3B 8 cylinder diesels driving twin screws. Eight years after the first boat had been built, it was decided to build a third Clyde as a relief boat for the first two. This was based on the Oakley hull design, but featured a completely redesigned superstructure resembling an overgrown Arun.

RNLI Fleet

ON[lower-alpha 1] Op. No.[lower-alpha 2] Name Built In service Principal Station
987 70-001 Charles H Barret (Civil Service No. 35) 1965 1968–1975
1975–1988		 Clovelly
Relief fleet[1]
988 70-002 Grace Paterson Ritchie 1966 1968–1988 Kirkwall[2] [3]
1030 70-003 City of Bristol 1974 1975–1988 Clovelly
  1. ↑ ON is the RNLI's Official Number of the boat.
  2. ↑ Op. No. is the RNLI's Operational Number of the boat carried on the hull.

Trinity House Fleet

Name Built In service Service
Lodesman 1974 1974–1988 Heavy weather pilot vessel

References

  1. ↑ "Clovelly Lifeboat Station History". RNLI. Retrieved 23 April 2012.
  2. ↑ "Kirkwall Lifeboat Station History". RNLI. Retrieved 23 April 2012.
  3. ↑ "Former Kirkwall lifeboat returns to visit local waters". RNLI. Retrieved 23 April 2012.

External links