Centrifugal force

Not to be confused with Centripetal force.

Centrifugal force (from Latin centrum, meaning "center", and fugere, meaning "to flee"[1][2]) is the apparent force that draws a rotating body away from the center of rotation. It is caused by the inertia of the body. In Newtonian mechanics, the term centrifugal force is used to refer to one of two distinct concepts: an inertial force (also called a "fictitious" force) observed in a non-inertial reference frame, and also sometimes to the equal and opposite reaction to a centripetal force in any reference frame (as per Newton's third law of motion).

The concept of centrifugal force is applied in rotating devices such as centrifuges, centrifugal pumps, centrifugal governors, centrifugal clutches, etc., as well as in centrifugal railways, planetary orbits, banked curves, etc. Some aspects of these situations can be analyzed in terms of the fictitious force in the rotating coordinate system, while other aspects additionally require the involvement of the reactive centrifugal force, otherwise called a normal reaction.

Current meaning

Centrifugal force is an outward force apparent only in a rotating reference frame; it does not exist when measurements are made in an inertial frame of reference. This type of force, associated with describing motion in a non-inertial reference frame is referred to as a fictitious or inertial force (a description that must be understood as a technical usage of these words that means only that the force is not present in a stationary or inertial frame).[3][4]

In a rotating reference frame, all objects appear to be under the influence of a radially (from the axis of rotation) outward force that is proportional to their mass, the distance from the axis of rotation of the frame, and to the square of the (angular velocity) of the frame.[5]

Motion relative to a rotating frame results in another fictitious force, the Coriolis force; and if the rate of rotation of the frame is changing, a third fictitious force, the Euler force is experienced. Together, these three fictitious forces are necessary for the formulation of correct equations of motion in a rotating reference frame.[6]

History of conceptions of centrifugal and centripetal forces

The conception of centrifugal force has evolved since the time of Huygens, Newton, Leibniz, and Hooke who expressed early conceptions of it. Its modern conception as a fictitious force arising in a rotating reference frame evolved in the eighteenth and nineteenth centuries.

Centrifugal force has also played a role in debates in classical mechanics about detection of absolute motion. Newton suggested two arguments to answer the question of whether absolute rotation can be detected: the rotating bucket argument, and the rotating spheres argument.[7] According to Newton, in each scenario the centrifugal force would be observed in the object's local frame (the frame where the object is stationary) only if the frame were rotating with respect to absolute space. Nearly two centuries later, Mach's principle was proposed where, instead of absolute rotation, the motion of the distant stars relative to the local inertial frame gives rise through some (hypothetical) physical law to the centrifugal force and other inertia effects. Today's view is based upon the idea of an inertial frame of reference, which privileges observers for which the laws of physics take on their simplest form, and in particular, frames that do not use centrifugal forces in their equations of motion in order to describe motions correctly.

The analogy between centrifugal force (sometimes used to create artificial gravity) and gravitational forces led to the equivalence principle of general relativity.[8][9]

Reactive centrifugal force

A reactive centrifugal force is a reaction force to a centripetal force. A body undergoing curved motion, such as circular motion, constantly accelerates toward the axis of rotation. This centripetal acceleration is provided by a centripetal force, which is exerted on the rotating body by some other body. In accordance with Newton's third law of motion, the rotating body exerts an equal and opposite force on the other body. This reactive force is exerted by the rotating mass on the other body that provides the centripetal force and its direction is from that other body toward the rotating mass.[10][11] [12][13]

This conception of the real reaction force to a real centripetal force is fundamentally different from the fictitious centrifugal force. As they may both be "centrifugal" (where, for example, the body providing the centripetal force to the rotating body is between the axis of rotation and the rotating body), they may be easily conflated. Whereas the 'fictitious force' acts on the body moving in a circular path, the 'reactive force' is exerted by the body moving in a circular path onto some other body (i.e. the body that provides the centripetal force to the first). The former is useful in analyzing the motion of the body in a rotating reference frame; the latter is useful for finding forces on other objects in an inertial frame.

This reaction force is sometimes described as a centrifugal inertial reaction,[14][15] that is, a force that is centrifugally directed, which is a reactive force equal and opposite to the centripetal force that is curving the path of the mass.

The concept of the reactive centrifugal force is sometimes used in mechanics and engineering. It is sometimes referred to as just centrifugal force rather than as reactive centrifugal force.[16][17]

Fictitious vs. reactive force

The table below compares various facets of the "fictitious force" and "reactive force" concepts of centrifugal force

Fictitious centrifugal force Reactive centrifugal force
Reference
frame		 Non-inertial frames Any
Exerted
  by		 Acts as if emanating
from the rotation axis,
but no real source		 Bodies moving in
curved paths
Exerted
  upon		 All bodies, moving or not;
if moving, Coriolis force
also is present		 The object(s) causing
the curved motion, not upon
the body in curved motion
Direction Away from rotation axis,
regardless of path of body		 Opposite to the
centripetal force
causing curved path
Analysis Kinetic:
included as force in
Newton's laws of motion		 Kinematic:
related to
centripetal force

Example

Free body diagram showing the forces on a ball and a string keeping it in circular motion. Left: inertial frame where the ball is seen to rotate. Right: co-rotating frame where the ball appears stationary. All the forces have the same magnitude, but their directions may be opposite.

The properties of the two forces in the above Table are illustrated by an example shown in the figure. The figure shows a ball in circular motion, tied to a post by a string. The post is fixed in the ground, and the string is considered too light-weight to affect the forces. The figure is an example of a free body diagram, an "exploded" engineering depiction of the different parts with the forces on each shown separately.

The forces in the inertial frame where the ball is seen to move are shown in the left column, the co-rotating frame where the ball appears not to move is shown in the right column.

The center picture of the inertial frame (left) shows the ball rotating. This circular motion departs from a straight line because the ball is subject to the centripetal radially inward force provided by the string tension. As described in the article uniform circular motion, in the case where the speed of the ball is constant, the centripetal acceleration is:

a = \frac{v^2}{r} \, ,

with a  the acceleration, v  the constant speed, and r  the radius of the path. The force is, of course, this acceleration multiplied by the mass of the ball.

The center picture of the co-rotating frame (right) shows the ball sitting still in a rotating frame of reference. The force on the ball due to the tension in the string is balanced by the centrifugal force introduced by the rotation of the co-rotating frame, so when the centrifugal force is included in Newton's laws of motion there is zero net force upon the ball. The appearance of a centrifugal force in this non-inertial frame is indicated in the Table, and its properties agree with those in the Table.

The lower figures show the forces upon the string, which are the same in both frames: the two ends of the string are subject to equal but oppositely directed forces. At the end of the string attached to the ball, the force is the reactive centrifugal force, the outward force exerted by the ball upon the string in reaction to the force exerted upon the ball by the tension in the string, as predicted by Newton's "action and reaction" third law of motion. As indicated in the Table, this force appears in all frames of reference, and its properties agree with those listed in the Table. This force is transmitted to the center post, where the string pulls upon the post.

At the post-end of the string, the post reacts to the pull by the string and exerts an inward directed force upon the string, labeled post reaction. The force upon the string exerted by the post balances the outward reactive centrifugal force at the other end, resulting in zero net  force upon the string. However, the two forces pulling opposite ends of the string in opposite directions place the string under tension. Detection of the non-zero tension in the string alerts the observers in the co-rotating frame that they are in fact rotating, and the ball only appears to be stationary because they are turning with it. This observation was used by Newton in his rotating spheres discussion of ways to detect absolute rotation.

Use of the term in Lagrangian mechanics

Lagrangian mechanics formulates mechanics in terms of generalized coordinates {qk}, which can be as simple as the usual polar coordinates (r,\ \theta) or a much more extensive list of variables.[18][19] Within this formulation the motion is described in terms of generalized forces, using in place of Newton's laws the Euler–Lagrange equations. Among the generalized forces, those involving the square of the time derivatives {(dqk   ⁄ dt )2} are sometimes called centrifugal forces.[20][21][22][23]

The Lagrangian approach to polar coordinates that treats (r,\ \theta) as generalized coordinates, (\dot{r},\ \dot{\theta}) as generalized velocities and (\ddot{r},\ \ddot{\theta}) as generalized accelerations, is outlined in another article, and found in many sources.[24][25][26] For the particular case of single-body motion found using the generalized coordinates (\dot{r},\ \dot{\theta}) in a central force, the Euler–Lagrange equations are the same equations found using Newton's second law in a co-rotating frame. For example, the radial equation is:

\mu\ddot{r} = \mu r\dot\theta^2 - \frac{\mathrm{d}U}{\mathrm{d}r}

where U(r) is the central force potential and μ is the mass of the object. The left side is a "generalized force" and the first term on the right is the "generalized centrifugal force". However, the left side is not comparable to a Newtonian force, as it does not contain the complete acceleration, and likewise, therefore, the terms on the right-hand side are "generalized forces" and cannot be interpreted as Newtonian forces.[27]

The Lagrangian centrifugal force is derived without explicit use of a rotating frame of reference,[28] but in the case of motion in a central potential the result is the same as the fictitious centrifugal force derived in a co-rotating frame.[29] The Lagrangian use of "centrifugal force" in other, more general cases, however, has only a limited connection to the Newtonian definition.

References

  1. ↑ http://www.merriam-webster.com/dictionary/centrifugal
  2. ↑ http://www.collinsdictionary.com/dictionary/english/centrifugal
  3. ↑ Takwale, R. G. and P. S. Puranik (1980). Introduction to classical mechanics. Tata McGraw-Hill. ISBN 978-0-07-096617-8, p. 248.
  4. ↑ Jacobson, Mark Zachary (1980). Fundamentals of atmospheric modeling. Cambridge: University Press. ISBN 978-0-521-63717-6, p. 80.
  5. ↑ Encyclopaedia Britannica, article on Centrifuge
  6. ↑ Fetter, Alexander L. and John Dirk Walecka (2003). Theoretical Mechanics of Particles and Continua (Reprint of McGraw-Hill 1980 ed.). Courier Dover Publications. ISBN 0-486-43261-0, pp. 38–39.
  7. ↑ An English translation is found at Sir Isaac Newton (1934). Philosophiae naturalis principia mathematica (Andrew Motte translation of 1729, revised by Florian Cajori ed.). University of California Press. pp. 10–12.
  8. ↑ Barbour, Julian B. and Herbert Pfister (1995). Mach's principle: from Newton's bucket to quantum gravity. Birkhäuser. ISBN 0-8176-3823-7, p. 69.
  9. ↑ Eriksson, Ingrid V. (2008). Science education in the 21st century. Nova Books. ISBN 1-60021-951-9, p. 194.
  10. ↑ Mook, Delo E. & Thomas Vargish (1987). Inside relativity. Princeton NJ: Princeton University Press. ISBN 0-691-02520-7, p. 47.
  11. ↑ G. David Scott (1957). "Centrifugal Forces and Newton's Laws of Motion" 25. American Journal of Physics. p. 325.
  12. ↑ Signell, Peter (2002). "Acceleration and force in circular motion" Physnet. Michigan State University, "Acceleration and force in circular motion", §5b, p. 7.
  13. ↑ Mohanty, A. K. (2004). Fluid Mechanics. PHI Learning Pvt. Ltd. ISBN 81-203-0894-8, p. 121.
  14. ↑ Roche, John (September 2001). "Introducing motion in a circle". Physics Education 43 (5), pp. 399-405, "Introducing motion in a circle". Retrieved 2009-05-07.
  15. ↑ Lloyd William Taylor (1959). Physics, the pioneer science 1. Dover Publications. p. 173.
  16. ↑ Edward Albert Bowser (1920). An elementary treatise on analytic mechanics: with numerous examples (25th ed.). D. Van Nostrand Company. p. 357.
  17. ↑ Joseph A. Angelo (2007). Robotics: a reference guide to the new technology. Greenwood Press. p. 267. ISBN 1-57356-337-4.
  18. ↑ For an introduction, see for example Cornelius Lanczos (1986). The variational principles of mechanics (Reprint of 1970 University of Toronto ed.). Dover. p. 1. ISBN 0-486-65067-7.
  19. ↑ For a description of generalized coordinates, see Ahmed A. Shabana (2003). "Generalized coordinates and kinematic constraints". Dynamics of Multibody Systems (2 ed.). Cambridge University Press. p. 90 ff. ISBN 0-521-54411-4.
  20. ↑ Christian Ott (2008). Cartesian Impedance Control of Redundant and Flexible-Joint Robots. Springer. p. 23. ISBN 3-540-69253-3.
  21. ↑ Shuzhi S. Ge, Tong Heng Lee, Christopher John Harris (1998). Adaptive Neural Network Control of Robotic Manipulators. World Scientific. pp. 47–48. ISBN 981-02-3452-X. In the above Euler–Lagrange equations, there are three types of terms. The first involves the second derivative of the generalized co-ordinates. The second is quadratic in \boldsymbol{\dot q} where the coefficients may depend on \boldsymbol{q}. These are further classified into two types. Terms involving a product of the type {\dot q_i}^2 are called centrifugal forces while those involving a product of the type \dot q_i \dot q_j for i ≠ j are called Coriolis forces. The third type is functions of \boldsymbol{q} only and are called gravitational forces.
  22. ↑ R. K. Mittal, I. J. Nagrath (2003). Robotics and Control. Tata McGraw-Hill. p. 202. ISBN 0-07-048293-4.
  23. ↑ T Yanao & K Takatsuka (2005). "Effects of an intrinsic metric of molecular internal space". In Mikito Toda, Tamiki Komatsuzaki, Stuart A. Rice, Tetsuro Konishi, R. Stephen Berry. Geometrical Structures Of Phase Space In Multi-dimensional Chaos: Applications to chemical reaction dynamics in complex systems. Wiley. p. 98. ISBN 0-471-71157-8. As is evident from the first terms ..., which are proportional to the square of \dot\phi, a kind of "centrifugal force" arises ... We call this force "democratic centrifugal force". Of course, DCF is different from the ordinary centrifugal force, and it arises even in a system of zero angular momentum.
  24. ↑ John R Taylor (2005). Classical Mechanics. Sausalito, California: Univ. Science Books. pp. 299 ff. ISBN 1-891389-22-X.
  25. ↑ Francis Begnaud Hildebrand (1992). Methods of Applied Mathematics (Reprint of 1965 2nd ed.). Courier Dover Publications. p. 156. ISBN 0-486-67002-3.
  26. ↑ V. B. Bhatia (1997). Classical Mechanics: With Introduction to Nonlinear Oscillations and Chaos. Alpha Science Int'l Ltd. p. 82. ISBN 81-7319-105-0.
  27. ↑ Henry M. Stommel and Dennis W. Moore (1989). An Introduction to the Coriolis Force. Columbia University Press. pp. 36–38.
  28. ↑ Edmond T Whittaker (1988). A treatise on the analytical dynamics of particles and rigid bodies (Reprint of 1917 2nd ed.). Cambridge University Press. pp. 40–41. ISBN 0-521-35883-3.
  29. ↑ See p. 5 in Donato Bini, Paolo Carini, Robert T Jantzen (1997). "The intrinsic derivative and centrifugal forces in general relativity: I. Theoretical foundations". International Journal of Modern Physics D 6 (1).. The companion paper is Donato Bini, Paolo Carini, Robert T Jantzen (1997). "The intrinsic derivative and centrifugal forces in general relativity: II. Applications to circular orbits in some stationary axisymmetric spacetimes". International Journal of Modern Physics D 6 (1).