Category 3 cable

Category 3 cable, commonly known as Cat 3 or station wire, and less commonly known as VG or Voice-grade (as, for example, in 100BaseVG), is an unshielded twisted pair (UTP) cable used in telephone wiring.

It is part of a family of copper cabling standards defined jointly by the Electronic Industries Alliance and the Telecommunications Industry Association and defined in TIA/EIA-568-B. Although designed to reliably carry data up to 10 Mbit/s, modern data networks run at much higher speeds, and Cat5e or Cat6 is now used for all new installations - and many large institutions require any repairs or additions to existing buildings that currently use Cat3 to be upgraded to Cat5e.[1]

Networking

Cat 3 was widely used in computer networking in the early 1990s for 10BASE-T Ethernet (and to a lesser extent for 100BaseVG Ethernet, token ring and 100BASE-T4), but from the early 2000s new structured cable installations were almost invariably built with the higher performing Cat 5e or Cat 6 cable required by 100BASE-TX.

The original Power over Ethernet specification supports the use of Cat 3 cable, but the new 802.3at Type 2 high-power variation does not.[2]

See also

References

  1. ↑ "University of Wisconsin - Standards for the Installation of New Data/Voice Jacks". Retrieved 2013-09-17.
  2. ↑ IEEE 802.3at-2009, clause 33.1.1c

External links