Carlos Ortiz Longo
Carlos Ortiz Longo | |
---|---|
Source NASA | |
Born |
August 18, 1962 San Juan, Puerto Rico |
Nationality | USA |
Occupation | Aerospace Engineer, Scientist, and Pilot |
Dr. Carlos R. Ortiz Longo (born August 18, 1962) is a NASA Aerospace Engineer and Commercial Pilot, with over 30 years expertise in Thermal Analysis, Thermal Design, Atmospheric Thermal Protection Systems, Materials Engineering, Mechanical Behavior of High Temperature Structural Ceramics, Mechanical Testing of Materials, Structural Mechanics, Astronaut Crew Health Care Systems, Project Management, and System Management.
He also has 20 years experience as a General Aviation, and Commercial and Corporate pilot.
Early years
Ortiz Longo was one of four children born to Dr. Carlos Ortiz Espada and Carmen Longo Agosto in San Juan, Puerto Rico. There he received both his primary and secondary education. He attended the following schools: Josefita Monserrate de Sellés [1] (1966 to 1968), Julio Sellés Solá [2] (1969), Sagrado Corazón de Jesus [3] (1970 to 1974), and Colegio Nuestra Sra. del Pilar (1974 to 1980)
As a child his creative imagination was encouraged by both his parents. His father, Dr. Ortiz Espada, a medical doctor and prominent pediatrician, was very influential in his life.
Joining NASA
In 1980, Ortiz Longo enrolled in the University of Puerto Rico at Mayaguez school of engineering. During his third year, while studying mechanical engineering, he came upon an advertisement in his school stating that officials from NASA would be visiting and conducting interviews at the campus. Ortiz Longo responded to the ad and went to the interview. NASA accepted him, and offered him a Cooperative Education Program position at the Johnson Space Center in Houston, United States.
He moved to Houston in 1983, and joined the NASA Johnson Space Center. He helped train astronauts for the first Spacelab mission, which was carried aloft in the Space Shuttle Columbia's payload bay during STS-9.
He joined the Engineering Directorate at the Johnson Space Center in 1984, and at present, remains in this organization. He has worked in various Divisions in the Engineering Directorate, including: Structures and Thermal Division, Structural Engineering Division, Crew and Thermal Systems Division, Biomedical Systems Division, and various Directorate Offices.
Further Experience
Ortiz Longo Flying a North American T-6 Texan |
---|
Ortiz Longo Flying a Russian Yakovlev 50 |
---|
Earned his Bachelor of Science in Mechanical Engineering from the University of Puerto Rico at Mayagüez in 1984. Inducted to the Engineering Honor Society, Tau Beta Pi.
Earned his Master of Science in Material Science and Engineering from the Cullen College of Engineering in 1993.
In 1996, Ortiz Longo was part of the Astronaut Selection Program group of 123 finalists (from a pool of 2451 qualified applicants [4] [5]), that interviewed at the Johnson Space Center to become part of Astronaut Class 16. This year, he was also named Space Shuttle Division Chief Engineer for structures, mechanics and materials.
Earned his Doctorate Degree in Material Science and Engineering from the Cullen College of Engineering in 2000.
In 2003 he began supporting the Space Station Program as System Manager for the Crew Health Care System (CHeCS).[6]
Dr. Ortiz Longo is also a commercial pilot. He is an avid flyer of vintage and experimental aircraft, including: Boeing Stearman, North American T-6 Texan, Russian Yakovlev Yak-50 (1975) and Yakovlev Yak-52, Boeing B-17, North American B-25, Max Holste Broussard, Wilga PZL-104, North American T-28 Trojan, amongst others. He also flies corporate jets, including the Gulfstream IV, Beechcraft Hawker (British Aerospace 125), Cessna Citation V, and the Embraer Phenom 300.
Written works
Among his Professional Publications and Conference Presentations are the following:
- "Elevated Temperature Mechanical Behavior of Fibrous Ceramic Thermal Insulators," C. R. Ortiz-Longo, K. W. White, American Ceramic Society Pacific Rim Conference, Paper SVI-7-93P, Honolulu, Hawaii, November 1993.
- "Thermal Shock Behavior of Low Density Fibrous Ceramic Insulators," C. R. Ortiz-Longo, K. W. White, American Ceramic Society Pacific Rim Conference, Paper SVI-8-93P, Honolulu, Hawaii, November 1993.
- "Elevated Temperature Mechanical Characterization of an in Situ Reinforced Ceramic Matrix Composite: Si3N4 whisker reinforced BAS Glass Ceramic," K. W. White, Z. Xu, C. R. Ortiz-Longo, 96th Annual Meeting of the American Ceramic Society, Paper SXIP-47-94, Indianapolis, IN., April 1994.
- "Elevated-Temperature Fracture Characterization of Advanced Fibrous Ceramic Thermal Insulators," C. R. Ortiz-Longo, K. W. White, J. Amer. Ceram. Soc., 77[10], 2703–2711, 1994.
- "Shuttle Plume Impingement Flight Experiment Thermal-Vacuum Qualification and Acceptance Testing," S. L. Rickman, C. R. Ortiz-Longo, 6th Annual Spacecraft Thermal Control Technology Workshop, The Aerospace Corporation, El Segundo, CA, March, 1995.
- "Hexacelsian to Celsian Phase Transformation Mechanisms in the Barium Aluminum Silicate Glass Ceramic System,” C. R. Ortiz-Longo, F. Yu, K. W. White, Presented at the 97th Annual Meeting of the American Ceramic Society, Paper SXV-25-95, Cincinnati, OH, April 1995.
- "Method for the Calculation of Spacecraft Umbra and Penumbra Shadow Terminator Points," C. R. Ortiz-Longo, S. L. Rickman, NASA-TP3547, April 1995.
- "The Microstructural Characterization of In-Situ Whisker Reinforced Si3N4 /BAS Composite," F. Yu, C.R. Ortiz-Longo, K.W. White, Presented at the Joint Fall Meeting of the American Ceramic Society, Paper 23-BP-95F, New Orleans, LA, November 1995.
- "Microstructural Studies of In-Situ Whisker Reinforced Si3N4 /BAS Composite," F. Yu, C.R. Ortiz-Longo, K.W. White, Presented at the 98th Annual Meeting of the American Ceramic Society, Papers SI-14-96 and SVIIP-18-96, Indianapolis, IN, April 1996.
- "An Experimental Study of the Microstructural Mechanisms Affecting the Strain-Softening Behavior of Mortar,” R Dasgupta, J.C. Hay, K.W. White, C.R. Ortiz-Longo, Presented at the 98th Annual Meeting of the American Ceramic Society, Paper T-40-96, Indianapolis, IN, April 1996.
- "The Thermal Synthesizer System," M. Welch, C. R. Ortiz-Longo, Presented at the 7th Thermal and Fluids Analysis Workshop (TFAWS), NASA Lewis Research Center, Cleveland, OH, April 1996.
- "The Microstructural-Creep Behavior Relationship of Si3N4/Barium Aluminum Silicate (BAS) Ceramic Matrix Composite," C. R. Ortiz-Longo, F. Yu, N. Nagarajan, K.W. White, 99th Annual Meeting of the American Ceramic Society, Paper SXVI-49a-97, Cleveland, OH, April 1997.
- "A Composite Thermal Superinsulator Incorporating Silica Aerogel," J. Wittenauer, S. Lovejoy, K. Benner and C. R. Ortiz-Longo, Presented at the 49th Pacific Coast Regional and Basic Science Division Meeting of the American Ceramic Society, Paper PCSVIII-019-97, San Francisco, CA, October 1997.
- "A Model of the Creep Behavior-Microstructural Relationship of a High Temperature Fibrous Ceramic Composite Insulator,” C. R. Ortiz-Longo, K. Ravi-Chandar, K.W. White, a white paper, 1997.
- "Microstructural Studies of the Mechanisms Influencing the Strain-Softening Behavior of Mortar," R. Dasgupta, J.C. Hay, C. R. Ortiz-Longo, K.W. White, Cement and Concrete Research, 28 [10], 1429–1444, 1998.
- "The Mircostructural Characterization of In Situ Grown Si3N4 whisker-reinforced Barium Aluminum Silicate Ceramic Matrix Composite, F. Yu, C.R. Ortiz Longo, K.W. White, D.L. Hunn, J. Mater. Sci., 34 2821-35, 1999.
- "Study of the Fatigue Damage Accumulation Mechanisms in Monolithic Ceramics," R. Geraghty, C. R. Ortiz-Longo, K.W. White, 101st Annual meeting of the American Ceramics Society, Indianapolis, IN, May 1999.
- “Interfacial Phenomena in the Fatigue Crack Growth Behavior of Monolithic Ceramics”, C.R. Ortiz-Longo, R. Geragthy, L. Olasz, and K.W. White, Abstract submitted to the 51st Pacific Coast Regional Meeting (PCRM) and the ACerS Basic Science and Electronics Divisions Meeting, Bellevue, WA, Oct. 27-29, 1999
Awards
Among his many awards and recognitions are:
- Inducted into the Tau Beta Pi Engineering Honor Society, Puerto Rico Alpha Chapter, 1984.
- NASA Group Achievement Award, Orbital Refueling System Flight Experiment, 1986,
- NASA Productivity Improvement Award, New Shuttle Thermal Control System Blanket Inspection Method, 1989,
- Golden Eagle Award, Shuttle Thermal Control System Inspection Methods, 1989,
- NASA Productivity Improvement Award, Thermal Interactive Mission Evaluation System (TIMES-89), 1989,
- Silver Snoopy Award, For the resolution of the STS-40 Payload Bar Door Seal Anomaly, 1991,[7]
- NASA Group Achievement Award, Shuttle Plume Impingement Flight Experiment, 1995,
- Space Act Award, Thermal Interactive Mission Evaluation System, 1995,
- Automation and Robotics Systems Division Elite Team Award, Letter of Recognition from the Chief of the Automation, Robotics, and Simulation Division, for support given to operational evaluation of the International Space Station FGB grapple fixture, 1995
- Space Act Award, Thermal Synthesizer System, TSS, 1996,
- Finalist, Astronaut Selection Program, Astronaut Candidate Class 16, 1996,
- Letter of Recognition from the NASA Administrator, Daniel S. Goldin, for contributions in the development of the Quantitative Risk Assessment System (QRAS) model, 1997,
- NASA Group Achievement Award, Space Shuttle Risk Model Team, 1998,
- NASA Group Achievement Award, Space Station Phase 1 Program Team, 1998,
- NASA Group Achievement Award, Space Shuttle Orbiter Upgrades Definition Team, 1998,
- Chairman, Thermal and Fluids Analysis Workshop (TFAWS), International Thermal Conference, NASA JSC, 1997,
- NASA Fellowship Program, 1992 and 1999
- NASA Group Achievement Award, Expedition 6 EVA Team, 2003
- NASA Group Achievement Award, ISS TVIS (treadmill) Gyro Repair Team, 2004
- NASA Exceptional Achievement Medal, 2005
- Graduate of the NASA Leadership Development Program, 2009
- Various Performance Awards, 1985-present
Personal
Andrés R. Ortiz | |
---|---|
Source NASA | |
Nationality | USA |
Occupation | Aerospace Engineer |
Dr. Carlos Ortiz Longo is multilingual in basic Russian, and is fluent in English and Spanish.
His brother, Carlos E. Ortiz Longo (a.k.a. C. Enrique Ortiz), also worked for NASA. He was a Space Shuttle Avionics Software Engineer at IBM, then LORAL, Johnson Space Center, Houston. Both brothers are recipients of NASA's Silver Snoopy Award, and at times, concurrently worked in the Mission Evaluation Room (MER) [8] during Space Shuttle missions at the Johnson Space Center.
His son, Andrés R. Ortiz, a Texas A&M Aerospace Engineer graduate, also works at the Johnson Space Center in Houston as an International Space Station Flight controller for the Station Power, Articulation, and Thermal Control (SPARTAN) team.
His other son, Gabriel C. Ortiz is a Medical Doctor, and graduate of the University of Texas Galveston Branch UTMB. He is currenly part of the residency program in Internal Medicine at the Ochsner Health System in New Orleans.
See also
- List of famous Puerto Ricans
- Puerto Rican scientists and inventors
- List of Puerto Ricans in the United States Space Program
- University of Puerto Rico at Mayaguez people
Notes
References
- ↑ Escuela Josefita Monserrate de Sellés
- ↑ Escuela Julio Sellés Solá
- ↑ Colegio Sagrado Corazón de Jesus
- ↑ Ortiz-Longo Astronaut Selection
- ↑ Astronaut Selection Statistics
- ↑ Crew Health Care
- ↑ SFA Silver Snoopy Award
- ↑ Mission Evaluation Room