Carbon dioxide

Carbon dioxide

Names
Other names Carbonic acid gas Carbonic anhydride Carbonic oxide Carbon oxide Carbon(IV) oxide Dry ice (solid phase)
Identifiers
3DMet	B01131
ATC code	V03AN02
Beilstein Reference	1900390
CAS Registry Number	124-38-9 Y
ChEBI	CHEBI:16526 Y
ChEMBL	ChEMBL1231871 N
ChemSpider	274 Y
EC number	204-696-9
Gmelin Reference	989
InChI InChI=1S/CO2/c2-1-3 Y Key: CURLTUGMZLYLDI-UHFFFAOYSA-N Y InChI=1/CO2/c2-1-3 Key: CURLTUGMZLYLDI-UHFFFAOYAO
Jmol-3D images	Image Image
KEGG	D00004 Y
MeSH	Carbon+dioxide
RTECS number	FF6400000
SMILES O=C=O C(=O)=O
UNII	142M471B3J Y
UN number	1013 (gas), 1845 (solid)
Properties
Molecular formula	CO2
Molar mass	44.01 g·mol−1
Appearance	Colorless gas
Odor	Odorless
Density	1562 kg/m3 (solid at 1 atm and −78.5 °C) 770 kg/m3 (liquid at 56 atm and 20 °C) 1.977 kg/m3 (gas at 1 atm and 0 °C)
Melting point	−56.6 °C; −69.8 °F; 216.6 K (Triple point at 5.1 atm)
Sublimation conditions	−78.5 °C; −109.2 °F; 194.7 K (1 atm)
Solubility in water	1.45 g/L at 25 °C, 100 kPa
Vapor pressure	5.73 MPa (20 °C)
Acidity (pKa)	6.35, 10.33
Refractive index (nD)	1.1120
Viscosity	0.07 cP at −78.5 °C
Dipole moment	0 D
Structure
Crystal structure	trigonal
Molecular shape	linear
Thermochemistry
Specific heat capacity (C)	37.135 J/K mol
Std molar entropy (So298)	214 J·mol−1·K−1
Std enthalpy of formation (ΔfHo298)	−393.5 kJ·mol−1
Hazards
MSDS	External MSDS
NFPA 704	0 1 0
US health exposure limits (NIOSH):
PEL (Permissible)	TWA 5000 ppm (9000 mg/m3)[1]
REL (Recommended)	TWA 5000 ppm (9000 mg/m3) ST 30,000 ppm (54,000 mg/m3)[1]
IDLH (Immediate danger)	40,000 ppm[1]
Related compounds
Other anions	Carbon disulfide Carbon diselenide
Other cations	Silicon dioxide Germanium dioxide Tin dioxide Lead dioxide
Related carbon oxides	Carbon monoxide Carbon suboxide Dicarbon monoxide Carbon trioxide
Related compounds	Carbonic acid Carbonyl sulfide
Supplementary data page
Structure and properties	Refractive index (n), Dielectric constant (εr), etc.
Thermodynamic data	Phase behaviour solid–liquid–gas
Spectral data	UV, IR, NMR, MS
Except where noted otherwise, data is given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
N verify (what is: Y/N?)
Infobox references

Carbon dioxide (chemical formula CO₂) is a colorless, odorless gas vital to plant life on earth. This naturally occurring chemical compound is composed of two oxygen atoms each covalently double bonded to a single carbon atom. Carbon dioxide exists in the Earth's atmosphere as a trace gas at a concentration of about 0.04 percent (400 ppm) by volume.^[2] It is emitted from volcanoes, hot springs and geysers and is freed from carbonate rocks by dissolution in water and acids. CO₂ is found in lakes, at depth under the sea and commingled with oil and gas deposits.^[3] Since carbon dioxide is soluble in water, it is found naturally in the oceans.

Atmospheric carbon dioxide is the primary source of carbon in life on Earth and its concentration in Earth's pre-industrial atmosphere since late in the Precambrian eon was regulated by photosynthetic organisms. As part of the carbon cycle, plants, algae, and cyanobacteria use light energy to photosynthesize carbohydrate from carbon dioxide and water, with oxygen produced as a waste product.^[4] However, photosynthesis cannot occur in darkness and at night some carbon dioxide is produced by plants during respiration.^[5]

It is produced during the respiration of all aerobic organisms and is exhaled in the breath of air-breathing land animals, including humans. Carbon dioxide is produced during the processes of decay of organic materials and the fermentation of sugars in bread, beer and winemaking. It is an added constituent of carbonated beverages. It is produced by combustion of wood, carbohydrates and major carbon- and hydrocarbon-rich fossil fuels such as coal, peat, petroleum and natural gas. The frozen solid form of CO₂ is available as a commodity in many Western supermarkets, where it goes by the name of dry ice.

The environmental effects of carbon dioxide are currently of significant interest. It is an important greenhouse gas and burning of carbon-based fuels since the industrial revolution has rapidly increased its concentration in the atmosphere, leading to global warming. It is also a major source of ocean acidification since it dissolves in water to form carbonic acid.^[6]

History

Carbon dioxide was the first gas to be described as a discrete substance. In the seventeenth century, the Flemish chemist Jan Baptist van Helmont observed that when he burned charcoal in a closed vessel, the mass of the resulting ash was much less than that of the original charcoal. His interpretation was that the rest of the charcoal had been transmuted into an invisible substance he termed a "gas" or "wild spirit" (spiritus sylvestre).^[7]

The properties of carbon dioxide were studied more thoroughly in the 1750s by the Scottish physician Joseph Black. He found that limestone (calcium carbonate) could be heated or treated with acids to yield a gas he called "fixed air." He observed that the fixed air was denser than air and supported neither flame nor animal life. Black also found that when bubbled through limewater (a saturated aqueous solution of calcium hydroxide), it would precipitate calcium carbonate. He used this phenomenon to illustrate that carbon dioxide is produced by animal respiration and microbial fermentation. In 1772, English chemist Joseph Priestley published a paper entitled Impregnating Water with Fixed Air in which he described a process of dripping sulfuric acid (or oil of vitriol as Priestley knew it) on chalk in order to produce carbon dioxide, and forcing the gas to dissolve by agitating a bowl of water in contact with the gas.^[8]

Carbon dioxide was first liquefied (at elevated pressures) in 1823 by Humphry Davy and Michael Faraday.^[9] The earliest description of solid carbon dioxide was given by Adrien-Jean-Pierre Thilorier, who in 1835 opened a pressurized container of liquid carbon dioxide, only to find that the cooling produced by the rapid evaporation of the liquid yielded a "snow" of solid CO₂.^[10]

Chemical and physical properties

Structure and bonding

The carbon dioxide molecule is linear and centrosymmetric. The two C=O bonds are equivalent and are short (116.3 pm), consistent with double bonding.^[11] Since it is centrosymmetric, the molecule has no electrical dipole. Consistent with this fact, only two vibrational bands are observed in the IR spectrum – an antisymmetric stretching mode at 2349 cm⁻¹ and a bending mode near 666 cm⁻¹. There is also a symmetric stretching mode at 1388 cm⁻¹ which is only observed in the Raman spectrum.

In aqueous solution

Carbon dioxide is soluble in water, in which it reversibly forms H
2CO
3 (carbonic acid), which is a weak acid since its ionization in water is incomplete.

CO
2 + H
2O H
2CO
3

The hydration equilibrium constant of carbonic acid is (at 25 °C). Hence, the majority of the carbon dioxide is not converted into carbonic acid, but remains as CO₂ molecules, not affecting the pH.

The relative concentrations of CO
2, H
2CO
3, and the deprotonated forms HCO−
3 (bicarbonate) and CO2−
3(carbonate) depend on the pH. As shown in a Bjerrum plot, in neutral or slightly alkaline water (pH > 6.5), the bicarbonate form predominates (>50%) becoming the most prevalent (>95%) at the pH of seawater. In very alkaline water (pH > 10.4), the predominant (>50%) form is carbonate. The oceans, being mildly alkaline with typical pH = 8.2–8.5, contain about 120 mg of bicarbonate per liter.

Being diprotic, carbonic acid has two acid dissociation constants, the first one for the dissociation into the bicarbonate (also called hydrogen carbonate) ion (HCO₃⁻):

H₂CO₃ HCO₃⁻ + H⁺

K_a1 = 6996250000000000000♠2.5×10⁻⁴ mol/L; pK_a1 = 3.6 at 25 °C.^[11]

This is the true first acid dissociation constant, defined as , where the denominator includes only covalently bound H₂CO₃ and excludes hydrated CO₂(aq). The much smaller and often-quoted value near 6993416000000000000♠4.16×10⁻⁷ is an apparent value calculated on the (incorrect) assumption that all dissolved CO₂ is present as carbonic acid, so that . Since most of the dissolved CO₂ remains as CO₂ molecules, K_a1(apparent) has a much larger denominator and a much smaller value than the true K_a1.^[12]

The bicarbonate ion is an amphoteric species that can act as an acid or as a base, depending on pH of the solution. At high pH, it dissociates significantly into the carbonate ion (CO₃²⁻):

HCO₃⁻ CO₃²⁻ + H⁺

K_a2 = 6989469000000000000♠4.69×10⁻¹¹ mol/L; pK_a2 = 10.329

In organisms carbonic acid production is catalysed by the enzyme, carbonic anhydrase.

Chemical reactions of CO₂

CO₂ is a weak electrophile. Its reaction with basic water illustrates this property, in which case hydroxide is the nucleophile. Other nucleophiles react as well. For example, carbanions as provided by Grignard reagents and organolithium compounds react with CO₂ to give carboxylates:

MR + CO₂ → RCO₂M

where M = Li or MgBr and R = alkyl or aryl.

In metal carbon dioxide complexes, CO₂ serves as a ligand, which can facilitate the conversion of CO₂ to other chemicals.^[13]

The reduction of CO₂ to CO is ordinarily a difficult and slow reaction:

CO₂ + 2 e⁻ + 2H⁺ → CO + H₂O

The redox potential for this reaction near pH 7 is about −0.53 V versus the standard hydrogen electrode. The nickel-containing enzyme carbon monoxide dehydrogenase catalyses this process.^[14]

Physical properties

Carbon dioxide is colorless. At low concentrations, the gas is odorless. At higher concentrations it has a sharp, acidic odor. At standard temperature and pressure, the density of carbon dioxide is around 1.98 kg/m³, about 1.67 times that of air.

Carbon dioxide has no liquid state at pressures below 5.1 standard atmospheres (520 kPa). At 1 atmosphere (near mean sea level pressure), the gas deposits directly to a solid at temperatures below −78.5 °C (−109.3 °F; 194.7 K) and the solid sublimes directly to a gas above −78.5 °C. In its solid state, carbon dioxide is commonly called dry ice.

Liquid carbon dioxide forms only at pressures above 5.1 atm; the triple point of carbon dioxide is about 518 kPa at −56.6 °C (see phase diagram, above). The critical point is 7.38 MPa at 31.1 °C.^[15] Another form of solid carbon dioxide observed at high pressure is an amorphous glass-like solid.^[16] This form of glass, called carbonia, is produced by supercooling heated CO₂ at extreme pressure (40–48 GPa or about 400,000 atmospheres) in a diamond anvil. This discovery confirmed the theory that carbon dioxide could exist in a glass state similar to other members of its elemental family, like silicon (silica glass) and germanium dioxide. Unlike silica and germania glasses, however, carbonia glass is not stable at normal pressures and reverts to gas when pressure is released.

At temperatures and pressures above the critical point, carbon dioxide behaves as a supercritical fluid known as supercritical carbon dioxide.

Isolation and production

Industrially, carbon dioxide is mainly produced as an unrecovered byproduct of four technologies: combustion of fossil fuels, production of hydrogen by steam reforming, ammonia synthesis, and fermentation. It can be obtained by distillation from air, but this method is inefficient.

The combustion of all carbon-containing fuels, such as methane (natural gas), petroleum distillates (gasoline, diesel, kerosene, propane), coal, wood and generic organic matter produces carbon dioxide and, in most cases, water. As an example the chemical reaction between methane and oxygen is given below.

CH
4+ 2 O
2→ CO
2+ 2 H
2O

Quicklime (CaO), a compound that has many industrial uses, is produced by driving off CO₂ from limestone by heating (calcining) at about 850 °C:

CaCO
3→ CaO + CO
2

Iron is reduced from its oxides with coke in a blast furnace, producing pig iron and carbon dioxide:^[17]

Fe
2O
3+ 3 CO → 2 Fe + 3 CO
2

Yeast metabolizes sugar to produce carbon dioxide and ethanol, also known as alcohol, in the production of wines, beers and other spirits, but also in the production of bioethanol:

C
6H
12O
6 → 2 CO
2+ 2 C
2H
5OH

All aerobic organisms produce CO
2 when they oxidize carbohydrates, fatty acids, and proteins in the mitochondria of cells. The large number of reactions involved are exceedingly complex and not described easily. Refer to (cellular respiration, anaerobic respiration and photosynthesis). The equation for the respiration of glucose and other monosaccharides is:

C
6H
12O
6 + 6 O
2 → 6 CO
2 + 6 H
2O

Photoautotrophs (i.e. plants and cyanobacteria) use the energy contained in sunlight to photosynthesize simple sugars from CO
2 absorbed from the air and water:

n CO
2 + n H
2O → (CH
2O)
n + n O
2

Laboratory methods

A variety of chemical routes to carbon dioxide are known, such as the reaction between most acids and most metal carbonates. For example, the reaction between hydrochloric acid and calcium carbonate (limestone or chalk) is depicted below:

CaCO
3+ 2 HCl → CaCl
2+ H
2CO
3

The carbonic acid (H
2CO
3) then decomposes to water and CO
2:

H
2CO
3→ CO
2+ H
2O

Such reactions are accompanied by foaming or bubbling, or both. In industry such reactions are widespread because they can be used to neutralize waste acid streams.

Industrial production

Industrial carbon dioxide can be produced by several methods, many of which are practiced at various scales.^[18] In its dominant route, carbon dioxide is produced as a byproduct of the industrial production of ammonia and hydrogen. These processes begin with the reaction of water and natural gas (mainly methane).^[19]

Although carbon dioxide is not often recovered, carbon dioxide results from combustion of fossil fuels and wood as well fermentation of sugar in the brewing of beer, whisky and other alcoholic beverages. It also results from thermal decomposition of limestone, CaCO
3, in the manufacture of lime (calcium oxide, CaO). It may be obtained directly from natural carbon dioxide springs, where it is produced by the action of acidified water on limestone or dolomite.

Uses

Carbon dioxide is used by the food industry, the oil industry, and the chemical industry.^[18]

Precursor to chemicals

In the chemical industry, carbon dioxide is mainly consumed as an ingredient in the production of urea and methanol. Metal carbonates and bicarbonates, as well as some carboxylic acids derivatives (e.g., sodium salicylate) are prepared using CO₂.

In addition to conventional processes using CO₂ for chemical production electrochemical methods are also being explored at a research level. In particular, the use of renewable energy for production of fuels from CO₂ (such as methanol) is attractive as this could result in fuels that could be easily transported and used within conventional combustion technologies but have no net CO₂ emissions.^[20]

Foods

Carbon dioxide is a food additive used as a propellant and acidity regulator in the food industry. It is approved for usage in the EU^[21] (listed as E number E290), USA^[22] and Australia and New Zealand^[23] (listed by its INS number 290).

A candy called Pop Rocks is pressurized with carbon dioxide gas at about 4 x 10⁶ Pa (40 bar, 580 psi). When placed in the mouth, it dissolves (just like other hard candy) and releases the gas bubbles with an audible pop.

Leavening agents cause dough to rise by producing carbon dioxide. Baker's yeast produces carbon dioxide by fermentation of sugars within the dough, while chemical leaveners such as baking powder and baking soda release carbon dioxide when heated or if exposed to acids.

Beverages

Carbon dioxide is used to produce carbonated soft drinks and soda water. Traditionally, the carbonation in beer and sparkling wine came about through natural fermentation, but many manufacturers carbonate these drinks with carbon dioxide recovered from the fermentation process. In the case of bottled and kegged beer, the most common method used is carbonation with recycled carbon dioxide. With the exception of British Real Ale, draught beer is usually transferred from kegs in a cold room or cellar to dispensing taps on the bar using pressurized carbon dioxide, sometimes mixed with nitrogen.

Wine making

Carbon dioxide in the form of dry ice is often used in the wine making process to cool down bunches of grapes quickly after picking to help prevent spontaneous fermentation by wild yeast. The main advantage of using dry ice over regular water ice is that it cools the grapes without adding any additional water that may decrease the sugar concentration in the grape must, and therefore also decrease the alcohol concentration in the finished wine.

Dry ice is also used during the cold soak phase of the wine making process to keep grapes cool. The carbon dioxide gas that results from the sublimation of the dry ice tends to settle to the bottom of tanks because it is denser than air. The settled carbon dioxide gas creates a hypoxic environment which helps to prevent bacteria from growing on the grapes until it is time to start the fermentation with the desired strain of yeast.

Carbon dioxide is also used to create a hypoxic environment for carbonic maceration, the process used to produce Beaujolais wine.

Carbon dioxide is sometimes used to top up wine bottles or other storage vessels such as barrels to prevent oxidation, though it has the problem that it can dissolve into the wine, making a previously still wine slightly fizzy. For this reason, other gases such as nitrogen or argon are preferred for this process by professional wine makers.

Inert gas

It is one of the most commonly used compressed gases for pneumatic (pressurized gas) systems in portable pressure tools. Carbon dioxide is also used as an atmosphere for welding, although in the welding arc, it reacts to oxidize most metals. Use in the automotive industry is common despite significant evidence that welds made in carbon dioxide are more brittle than those made in more inert atmospheres, and that such weld joints deteriorate over time because of the formation of carbonic acid. It is used as a welding gas primarily because it is much less expensive than more inert gases such as argon or helium. When used for MIG welding, CO₂ use is sometimes referred to as MAG welding, for Metal Active Gas, as CO₂ can react at these high temperatures. It tends to produce a hotter puddle than truly inert atmospheres, improving the flow characteristics. Although, this may be due to atmospheric reactions occurring at the puddle site. This is usually the opposite of the desired effect when welding, as it tends to embrittle the site, but may not be a problem for general mild steel welding, where ultimate ductility is not a major concern.

It is used in many consumer products that require pressurized gas because it is inexpensive and nonflammable, and because it undergoes a phase transition from gas to liquid at room temperature at an attainable pressure of approximately 60 bar (870 psi, 59 atm), allowing far more carbon dioxide to fit in a given container than otherwise would. Life jackets often contain canisters of pressured carbon dioxide for quick inflation. Aluminium capsules of CO₂ are also sold as supplies of compressed gas for airguns, paintball markers, inflating bicycle tires, and for making carbonated water. Rapid vaporization of liquid carbon dioxide is used for blasting in coal mines. High concentrations of carbon dioxide can also be used to kill pests. Liquid carbon dioxide is used in supercritical drying of some food products and technological materials, in the preparation of specimens for scanning electron microscopy and in the decaffeination of coffee beans.

Fire extinguisher

Carbon dioxide extinguishes flames, and some fire extinguishers, especially those designed for electrical fires, contain liquid carbon dioxide under pressure. Carbon dioxide extinguishers work well on small flammable liquid and electrical fires, but not on ordinary combustible fires, because although it excludes oxygen, it does not cool the burning substances significantly and when the carbon dioxide disperses they are free to catch fire upon exposure to atmospheric oxygen. Carbon dioxide has also been widely used as an extinguishing agent in fixed fire protection systems for local application of specific hazards and total flooding of a protected space.^[24] International Maritime Organization standards also recognize carbon dioxide systems for fire protection of ship holds and engine rooms. Carbon dioxide based fire protection systems have been linked to several deaths, because it can cause suffocation in sufficiently high concentrations. A review of CO₂ systems identified 51 incidents between 1975 and the date of the report, causing 72 deaths and 145 injuries.^[25]

Supercritical CO₂ as solvent

Liquid carbon dioxide is a good solvent for many lipophilic organic compounds and is used to remove caffeine from coffee. Carbon dioxide has attracted attention in the pharmaceutical and other chemical processing industries as a less toxic alternative to more traditional solvents such as organochlorides. It is used by some dry cleaners for this reason (see green chemistry). It is used in the preparation of some aerogels because of the properties of supercritical carbon dioxide.

Agricultural and biological applications

Plants require carbon dioxide to conduct photosynthesis. Greenhouses may (if of large size, must) enrich their atmospheres with additional CO₂ to sustain and increase plant growth.^[26][27] A photosynthesis-related drop (by a factor less than two) in carbon dioxide concentration in a greenhouse compartment would kill green plants, or, at least, completely stop their growth. At very high concentrations (100 times atmospheric concentration, or greater), carbon dioxide can be toxic to animal life, so raising the concentration to 10,000 ppm (1%) or higher for several hours will eliminate pests such as whiteflies and spider mites in a greenhouse.^[28] Carbon dioxide is used in greenhouses as the main carbon source for Spirulina algae.

In medicine, up to 5% carbon dioxide (130 times atmospheric concentration) is added to oxygen for stimulation of breathing after apnea and to stabilize the O
2/CO
2 balance in blood.

It has been proposed that carbon dioxide from power generation be bubbled into ponds to grow algae that could then be converted into biodiesel fuel.^[29]

Oil recovery

Carbon dioxide is used in enhanced oil recovery where it is injected into or adjacent to producing oil wells, usually under supercritical conditions, when it becomes miscible with the oil. This approach can increase original oil recovery by reducing residual oil saturation by between 7 per cent to 23 per cent additional to primary extraction.^[30] It acts as both a pressurizing agent and, when dissolved into the underground crude oil, significantly reduces its viscosity, and changing surface chemistry enabling the oil to flow more rapidly through the reservoir to the removal well.^[31] In mature oil fields, extensive pipe networks are used to carry the carbon dioxide to the injection points.

Bio transformation into fuel

Researchers have genetically modified a strain of the cyanobacterium Synechococcus elongatus to produce the fuels isobutyraldehyde and isobutanol from CO₂ using photosynthesis.^[32]

Refrigerant

Liquid and solid carbon dioxide are important refrigerants, especially in the food industry, where they are employed during the transportation and storage of ice cream and other frozen foods. Solid carbon dioxide is called "dry ice" and is used for small shipments where refrigeration equipment is not practical. Solid carbon dioxide is always below −78.5 °C at regular atmospheric pressure, regardless of the air temperature.

Liquid carbon dioxide (industry nomenclature R744 or R-744) was used as a refrigerant prior to the discovery of R-12 and may enjoy a renaissance due to the fact that R134a contributes to climate change. Its physical properties are highly favorable for cooling, refrigeration, and heating purposes, having a high volumetric cooling capacity. Due to its operation at pressures of up to 130 bar (1880 psi), CO₂ systems require highly resistant components that have already been developed for mass production in many sectors. In automobile air conditioning, in more than 90% of all driving conditions for latitudes higher than 50°, R744 operates more efficiently than systems using R134a. Its environmental advantages (GWP of 1, non-ozone depleting, non-toxic, non-flammable) could make it the future working fluid to replace current HFCs in cars, supermarkets, and heat pump water heaters, among others. Coca-Cola has fielded CO₂-based beverage coolers and the U.S. Army is interested in CO₂ refrigeration and heating technology.^[33][34]

The global automobile industry is expected to decide on the next-generation refrigerant in car air conditioning. CO₂ is one discussed option.(see Sustainable automotive air conditioning)

Coal bed methane recovery

In enhanced coal bed methane recovery, carbon dioxide would be pumped into the coal seam to displace methane, as opposed to current methods which primarily rely on the removal of water (to reduce pressure) to make the coal seam release its trapped methane.^[35]

Niche uses

Carbon dioxide is so inexpensive and so innocuous, that it finds many small uses that represent what might be called niche uses. For example it is used in the carbon dioxide laser, which is one of the earliest type of lasers.

Carbon dioxide can be used as a means of controlling the pH of swimming pools, by continuously adding gas to the water, thus keeping the pH level from rising. Among the advantages of this is the avoidance of handling (more hazardous) acids. Similarly, it is also used in the maintaining reef aquaria, where it is commonly used in calcium reactors to temporarily lower the pH of water being passed over calcium carbonate in order to allow the calcium carbonate to dissolve into the water more freely where it is used by some corals to build their skeleton. It is also used as the primary coolant in advanced gas-cooled reactors in the nuclear power generation industry.

Carbon dioxide induction is commonly used for the euthanasia of laboratory research animals. Methods to administer CO₂ include placing animals directly into a closed, prefilled chamber containing CO₂, or exposure to a gradually increasing concentration of CO₂. In 2013, the American Veterinary Medical Association issued new guidelines for carbon dioxide induction, stating that a flow rate of 10% to 30% volume/min is optimal for the humane euthanization of small rodents.^[36]

In the Earth's atmosphere

Carbon dioxide in Earth's atmosphere is considered a trace gas, presently (early 2015) having an average concentration of 400 parts per million by volume^[2] (or 591 parts per million by mass). Atmospheric concentrations of carbon dioxide fluctuate slightly with the change of the seasons (see graph at right). Concentrations of carbon dioxide fall during the Northern Hemisphere spring and summer as plants consume the gas, and rise during the northern autumn and winter as plants go dormant, die and decay. Concentrations also vary considerably on a regional basis, especially near the ground. In urban areas concentrations are generally higher and indoors they can reach 10 times background levels.

Combustion of fossil fuels and deforestation have caused the atmospheric concentration of carbon dioxide to increase by about 43% since the beginning of the age of industrialization.^[38] A large majority of climate scientists agree is the main reason for the rise in average global temperature since 1880. Carbon dioxide is the heat-trapping gas primarily responsible for the rise but methane, nitrous oxide, ozone, and various other very long-lived heat-trapping gases also contribute. Carbon dioxide is of greatest concern because its rate of increase is exerting a larger overall warming influence than all of those other gases combined, and because of the long atmospheric lifetime of carbon dioxide.

Most carbon dioxide from human activities is released from burning coal and other fossil fuels. Other human activities, including deforestation, biomass burning, and cement production also produce carbon dioxide." Human activities "emit about 135 times more carbon dioxide than volcanoes do in a typical year."^[39] The cement industry is one of the three primary producers of carbon dioxide along with the energy production and transportation industries. As of 2011 concrete contributes 7% to global anthropogenic CO₂ emissions.^[40]

Volcanoes emit between 0.2 and 0.3 billion tons of carbon dioxide per year, compared to about 29 billion tons of carbon dioxide per year emitted by humans.^[39] Up to 40% of the gas emitted by some volcanoes during subaerial eruptions is carbon dioxide.^[41] It is estimated that volcanoes release about 130–230 million tonnes (145–255 million short tons) of CO₂ into the atmosphere each year.

Carbon dioxide is a greenhouse gas, nearly transparent to light from the sun but absorbing and emitting infrared radiation at its two infrared-active vibrational frequencies (see Structure and bonding above). This process causes carbon dioxide to warm the surface and lower atmosphere and cool the upper atmosphere. Not only do increasing carbon dioxide concentrations lead to increases in global surface temperature, but increasing global temperatures also cause increasing concentrations of carbon dioxide. This produces a positive feedback for changes induced by other processes such as orbital cycles.^[42] Five hundred million years ago carbon dioxide was 20 times more prevalent than today, decreasing to 4–5 times during the Jurassic period and then slowly declining with a particularly swift reduction occurring 49 million years ago.^[43][44]

Local concentrations of carbon dioxide can reach high values near strong sources, especially those that are isolated by surrounding terrain. At the Bossoleto hot spring near Rapolano Terme in Tuscany, Italy, situated in a bowl-shaped depression about 100m in diameter, concentrations of CO₂ rise to above 75% overnight, sufficient to kill insects and small animals. After sunrise the gas is dispersed by convection during the day.^[45] High concentrations of CO₂ produced by disturbance of deep lake water saturated with CO₂ are thought to have caused 37 fatalities at Lake Monoun, Cameroon in 1984 and 1700 casualties at Lake Nyos, Cameroon in 1986.^[46]

In the oceans

Carbon dioxide dissolves in the ocean to form carbonic acid (H₂CO₃), bicarbonate (HCO₃⁻) and carbonate (CO₃²⁻), and there is about fifty times as much carbon dissolved in the sea water of the oceans as exists in the atmosphere. The oceans act as an enormous carbon sink, and have taken up about a third of CO₂ emitted by human activity.^[47]

As the concentration of carbon dioxide increases in the atmosphere, the increased uptake of carbon dioxide into the oceans is causing a measurable decrease in the pH of the oceans which is referred to as ocean acidification. Although the natural absorption of CO
2 by the world's oceans helps mitigate the climatic effects of anthropogenic emissions of CO
2, it also results in a decrease in the pH of the oceans. This reduction in pH impacts the biological systems in the oceans, primarily oceanic calcifying organisms. These impacts span the food chain from autotrophs to heterotrophs and include organisms such as coccolithophores, corals, foraminifera, echinoderms, crustaceans and molluscs. Under normal conditions, calcite and aragonite are stable in surface waters since the carbonate ion is at supersaturating concentrations. However, as ocean pH falls, so does the concentration of this ion, and when carbonate becomes undersaturated, structures made of calcium carbonate are vulnerable to dissolution. Even if there is no change in the rate of calcification, therefore, the rate of dissolution of calcareous material increases.^[48]

Corals,^[49][50][51] coccolithophore algae,^{[52][53][54][55]} coralline algae,^[56] foraminifera,^[57] shellfish^[58] and pteropods^[59] experience reduced calcification or enhanced dissolution when exposed to elevated CO
2.

Gas solubility decreases as the temperature of water increases (except when both pressure exceeds 300 bar and temperature exceeds 393 K, only found near deep geothermal vents)^[60] and therefore the rate of uptake from the atmosphere decreases as ocean temperatures rise.

Most of the CO₂ taken up by the ocean, which is about 30% of the total released into the atmosphere,^[61] forms carbonic acid in equilibrium with bicarbonate. Some of these chemical species are consumed by photosynthetic organisms, that remove carbon from the cycle. Increased CO₂ in the atmosphere has led to decreasing alkalinity of seawater, and there is concern that this may adversely affect organisms living in the water. In particular, with decreasing alkalinity, the availability of carbonates for forming shells decreases,^[62] although there's evidence of increased shell production by certain species under increased CO₂ content.^[63]

NOAA states in their May 2008 "State of the science fact sheet for ocean acidification" that:
"The oceans have absorbed about 50% of the carbon dioxide (CO₂) released from the burning of fossil fuels, resulting in chemical reactions that lower ocean pH. This has caused an increase in hydrogen ion (acidity) of about 30% since the start of the industrial age through a process known as "ocean acidification." A growing number of studies have demonstrated adverse impacts on marine organisms, including:

• The rate at which reef-building corals produce their skeletons decreases, while production of numerous varieties of jellyfish increases.
• The ability of marine algae and free-swimming zooplankton to maintain protective shells is reduced.
• The survival of larval marine species, including commercial fish and shellfish, is reduced."

Also, the Intergovernmental Panel on Climate Change (IPCC) writes in their Climate Change 2007: Synthesis Report:^[64]
"The uptake of anthropogenic carbon since 1750 has led to the ocean becoming more acidic with an average decrease in pH of 0.1 units. Increasing atmospheric CO₂ concentrations lead to further acidification ... While the effects of observed ocean acidification on the marine biosphere are as yet undocumented, the progressive acidification of oceans is expected to have negative impacts on marine shell-forming organisms (e.g. corals) and their dependent species."

Some marine calcifying organisms (including coral reefs) have been singled out by major research agencies, including NOAA, OSPAR commission, NANOOS and the IPCC, because their most current research shows that ocean acidification should be expected to impact them negatively.^[65]

Carbon dioxide is also introduced into the oceans through hydrothermal vents. The Champagne hydrothermal vent, found at the Northwest Eifuku volcano at Marianas Trench Marine National Monument, produces almost pure liquid carbon dioxide, one of only two known sites in the world.^[66]

Sea urchins have been discovered to be able to convert carbon dioxide into raw material for their shells.^[67]

Biological role

Carbon dioxide is an end product of cellular respiration in organisms that obtain energy by breaking down sugars, fats and amino acids with oxygen as part of their metabolism. This includes all plants, algae and animals and aerobic fungi and bacteria. In vertebrates, the carbon dioxide travels in the blood from the body's tissues to the skin (e.g., amphibians) or the gills (e.g., fish), from where it dissolves in the water, or to the lungs from where it is exhaled. During active photosynthesis, plants can absorb more carbon dioxide from the atmosphere than they use in respiration.

Photosynthesis and carbon fixation

Carbon fixation is a biochemical process by which atmospheric carbon dioxide is incorporated by plants, algae and (cyanobacteria) into energy-rich organic molecules such as glucose, thus creating their own food by photosynthesis. Photosynthesis uses carbon dioxide and water to produce sugars from which other organic compounds can be constructed, and oxygen is produced as a by-product.

Ribulose-1,5-bisphosphate carboxylase oxygenase, commonly abbreviated to RuBisCO, is the enzyme involved in the first major step of carbon fixation, the production of two molecules of 3-phosphoglycerate from CO₂ and ribulose bisphosphate, as shown in the diagram at left.

RuBisCo is thought to be the single most abundant protein on Earth.^[68]

Phototrophs use the products of their photosynthesis as internal food sources and as raw material for the biosynthesis of more complex organic molecules, such as polysaccharides, nucleic acids and proteins. These are used for their own growth, and also as the basis of the food chains and webs that feed other organisms, including animals such as ourselves. Some important phototrophs, the coccolithophores synthesise hard calcium carbonate scales. A globally significant species of coccolithophore is Emiliania huxleyi whose calcite scales have formed the basis of many sedimentary rocks such as limestone, where what was previously atmospheric carbon can remain fixed for geological timescales.

Plants can grow as much as 50 percent faster in concentrations of 1,000 ppm CO₂ when compared with ambient conditions, though this assumes no change in climate and no limitation on other nutrients.^[69] Elevated CO₂ levels cause increased growth reflected in the harvestable yield of crops, with wheat, rice and soybean all showing increases in yield of 12–14% under elevated CO₂ in FACE experiments.^[70][71]

Increased atmospheric CO₂ concentrations result in fewer stomata developing on plants^[72] which leads to reduced water usage and increased water-use efficiency.^[73] Studies using FACE have shown that CO₂ enrichment leads to decreased concentrations of micronutrients in crop plants.^[74] This may have knock-on effects on other parts of ecosystems as herbivores will need to eat more food to gain the same amount of protein.^[75]

The concentration of secondary metabolites such as phenylpropanoids and flavonoids can also be altered in plants exposed to high concentrations of CO₂.^[76][77]

Plants also emit CO₂ during respiration, and so the majority of plants and algae, which use C3 photosynthesis, are only net absorbers during the day. Though a growing forest will absorb many tons of CO₂ each year, a mature forest will produce as much CO₂ from respiration and decomposition of dead specimens (e.g., fallen branches) as is used in photosynthesis in growing plants.^[78] Contrary to the long-standing view that they are carbon neutral, mature forests can continue to accumulate carbon^[79] and remain valuable carbon sinks, helping to maintain the carbon balance of the Earth's atmosphere. Additionally, and crucially to life on earth, photosynthesis by phytoplankton consumes dissolved CO₂ in the upper ocean and thereby promotes the absorption of CO₂ from the atmosphere.^[80]

Toxicity

Carbon dioxide content in fresh air (averaged between sea-level and 10 kPa level, i.e., about 30 km altitude) varies between 0.036% (360 ppm) and 0.041% (410 ppm), depending on the location.^[82]

CO₂ is an asphyxiant gas and not classified as toxic or harmful in accordance with Globally Harmonized System of Classification and Labelling of Chemicals standards of United Nations Economic Commission for Europe by using the OECD Guidelines for the Testing of Chemicals. In concentrations up to 1% (10,000 ppm), it will make some people feel drowsy and give the lungs a stuffy feeling.^[81] Concentrations of 7% to 10% (70,000 to 100,000 ppm) may cause suffocation, even in the presence of sufficient oxygen, manifesting as dizziness, headache, visual and hearing dysfunction, and unconsciousness within a few minutes to an hour.^[83] The physiological effects of acute carbon dioxide exposure are grouped together under the term hypercapnia, a subset of asphyxiation.

Because it is heavier than air, in locations where the gas seeps from the ground (due to sub-surface volcanic or geothermal activity) in relatively high concentrations, without the dispersing effects of wind, it can collect in sheltered/pocketed locations below average ground level, causing animals located therein to be suffocated. Carrion feeders attracted to the carcasses are then also killed. Children have been killed in the same way near the city of Goma by CO₂ emissions from the nearby volcano Mt. Nyiragongo.^[84] The Swahili term for this phenomenon is 'mazuku'.

Adaptation to increased concentrations of CO₂ occurs in humans, including modified breathing and kidney bicarbonate production, in order to balance the effects of blood acidification (acidosis). It was suggested that 2.0 percent inspired concentrations could be used for closed air spaces (e.g. a submarine) since the adaptation is physiological and reversible. Decrement in performance or in normal physical activity does not happen at this level of exposure for 5 days.^[85][86] However with ongoing respiratory acidosis, adaptation or compensatory mechanisms will be unable to reverse this condition. There are very few studies of the health effects of long-term continuous CO₂ exposure on humans and animals at levels below 1% and there is potentially a significant risk to humans in the near future with rising atmospheric CO₂ levels associated with climate change.^[87] Occupational CO₂ exposure limits have been set in the United States at 0.5% (5000 ppm) for an 8-hour period.^[88] At this level of CO₂, International Space Station crew experienced headaches, lethargy, mental slowness, emotional irritation, and sleep disruption.^[89] Studies in animals at 0.5% CO₂ have demonstrated kidney calcification and bone loss after 8 weeks of exposure.^[90] Another study of humans exposed in 2.5 hour sessions demonstrated significant effects on cognitive abilities at concentrations as low as 0.1% (1000ppm) CO₂ likely due to CO₂ induced increases in cerebral blood flow.^[91]

Miners, who are particularly vulnerable to gas exposure, referred to mixtures of carbon dioxide and nitrogen as "blackdamp," "choke damp" or "stythe." Before more effective technologies were developed, miners would frequently monitor for dangerous levels of blackdamp and other gases in mine shafts by bringing a caged canary with them as they worked. The canary is more sensitive to asphyxiant gases than humans, and as it became unconscious would stop singing and fall off its perch. The Davy lamp could also detect high levels of blackdamp (which sinks, and collects near the floor) by burning less brightly, while methane, another suffocating gas and explosion risk, would make the lamp burn more brightly.

Carbon dioxide differential above outdoor concentrations at steady state conditions (when the occupancy and ventilation system operation are sufficiently long that CO₂ concentration has stabilized) are sometimes used to estimate ventilation rates per person. CO₂ is considered to be a surrogate for human bio-effluents and may correlate with other indoor pollutants. Higher CO₂ concentrations are associated with occupant health, comfort and performance degradation. ASHRAE Standard 62.1–2007 ventilation rates may result in indoor levels up to 2,100 ppm above ambient outdoor conditions. Thus if the outdoor ambient is 400 ppm, indoor concentrations may reach 2,500 ppm with ventilation rates that meet this industry consensus standard. Concentrations in poorly ventilated spaces can be found even higher than this (range of 3,000 or 4,000).

Human physiology

Content

The body produces approximately 2.3 pounds (1.0 kg) of carbon dioxide per day per person,^[92] containing 0.63 pounds (290 g) of carbon.

In humans, this carbon dioxide is carried through the venous system and is breathed out through the lungs. Therefore, the carbon dioxide content in the body is high in the venous system, and decreases in the respiratory system, resulting in lower concentrations along any arterial system. Carbon dioxide content of the blood is often given as the partial pressure, which is the pressure which carbon dioxide would have had if it alone occupied the volume.^[93]

In humans, the carbon dioxide contents are as follows:

Reference ranges or averages for partial pressures of carbon dioxide (abbreviated PCO₂)

Unit	Venous blood gas	Alveolar pulmonary gas pressures	Arterial blood carbon dioxide
kPa	5.5[94]-6.8[94]	4.8	4.7[94]-6.0[94]
mmHg	41–51	36	35[95]-45[95]

Transport in the blood

CO₂ is carried in blood in three different ways. (The exact percentages vary depending whether it is arterial or venous blood).

• Most of it (about 70% to 80%) is converted to bicarbonate ions HCO−
  3 by the enzyme carbonic anhydrase in the red blood cells,^[96] by the reaction CO₂ + H₂O → H₂CO₃ → H⁺ + HCO−
  3.
• 5% – 10% is dissolved in the plasma^[96]
• 5% – 10% is bound to hemoglobin as carbamino compounds^[96]

Hemoglobin, the main oxygen-carrying molecule in red blood cells, carries both oxygen and carbon dioxide. However, the CO₂ bound to hemoglobin does not bind to the same site as oxygen. Instead, it combines with the N-terminal groups on the four globin chains. However, because of allosteric effects on the hemoglobin molecule, the binding of CO₂ decreases the amount of oxygen that is bound for a given partial pressure of oxygen. The decreased binding to carbon dioxide in the blood due to increased oxygen levels is known as the Haldane Effect, and is important in the transport of carbon dioxide from the tissues to the lungs. Conversely, a rise in the partial pressure of CO₂ or a lower pH will cause offloading of oxygen from hemoglobin, which is known as the Bohr Effect.

Regulation of respiration

Carbon dioxide is one of the mediators of local autoregulation of blood supply. If its levels are high, the capillaries expand to allow a greater blood flow to that tissue.

Bicarbonate ions are crucial for regulating blood pH. A person's breathing rate influences the level of CO₂ in their blood. Breathing that is too slow or shallow causes respiratory acidosis, while breathing that is too rapid leads to hyperventilation, which can cause respiratory alkalosis.

Although the body requires oxygen for metabolism, low oxygen levels normally do not stimulate breathing. Rather, breathing is stimulated by higher carbon dioxide levels. As a result, breathing low-pressure air or a gas mixture with no oxygen at all (such as pure nitrogen) can lead to loss of consciousness without ever experiencing air hunger. This is especially perilous for high-altitude fighter pilots. It is also why flight attendants instruct passengers, in case of loss of cabin pressure, to apply the oxygen mask to themselves first before helping others; otherwise, one risks losing consciousness.^[96]

The respiratory centers try to maintain an arterial CO₂ pressure of 40 mm Hg. With intentional hyperventilation, the CO₂ content of arterial blood may be lowered to 10–20 mm Hg (the oxygen content of the blood is little affected), and the respiratory drive is diminished. This is why one can hold one's breath longer after hyperventilating than without hyperventilating. This carries the risk that unconsciousness may result before the need to breathe becomes overwhelming, which is why hyperventilation is particularly dangerous before free diving.

See also

Inorganic compounds of carbon and related ions Compounds CBr4 CCl4 CF CF4 CI4 CO CO2 CO3 COS CS CS2 CSe2 C3O2 C3S2 CH4 C2H6 C3H8 C4H10 C5H12 C6H14 C7H16 C8H18 C6H6 SiC Carbon ions Carbides [:C≡C:]2–, [::C::]4–, [:C=C=C:]4– Cyanides [:C≡N:]– Cyanates [:O-C≡N:]– Thiocyanates [:S-C≡N:]– Fulminates [:C≡N-O:]– Thiofulminates [:C≡N-S:]– Oxides and related Oxides Metal carbonyls Carbonic acid Bicarbonates Carbonates

Oxygen compounds O3 AgO Al2O3 AmO2 Am2O3 As2O3 As2O5 Au2O3 B2O3 BaO BeO Bi2O3 BiO2 Bi2O5 BrO2 Br2O3 Br2O5 CO CO2 C2O3 CaO CaO2 CdO CeO2 Ce2O3 ClO2 Cl2O Cl2O3 Cl2O4 Cl2O6 Cl2O7 CoO Co2O3 Co3O4 CrO3 Cr2O3 Cr2O5 Cr5O12 CsO2 Cs2O3 CuO D2O Dy2O3 Er2O3 Eu2O3 F2O F2O2 F2O4 FeO Fe2O3 Fe3O4 Ga2O Ga2O3 GeO GeO2 H2O H218O H2O2 HfO2 HgO Hg2O Ho2O3 I2O4 I2O5 I2O6 I4O9 In2O3 InO2 KO2 K2O2 La2O3 Li2O Li2O2 Lu2O3 MgO Mg2O3 MnO MnO2 Mn2O3 Mn2O7 MoO2 MoO3 Mo2O3 NO NO2 N2O N2O3 N2O4 N2O5 NaO2 Na2O Na2O2 NbO NbO2 Nd2O3 Chemical formulas

References

Further reading

• Seppanen, Fisk and Mendell, Association of Ventilation Rates and CO₂ Concentrations with Health and Other Responses in Commercial and Institutional Buildings, Indoor Air 1999.
• Shendell, Prill, Fisk, Apte1, Blake & Faulkner, Associations between classroom CO₂ concentrations and student attendance in Washington and Idaho, Indoor Air 2004.

External links

Library resources about Carbon dioxide

Resources in your library Resources in other libraries

• International Chemical Safety Card 0021
• CID 280 from PubChem
• Carbon dioxide MSDS by Amerigas in the SDSdata.org database.
• CDC – NIOSH Pocket Guide to Chemical Hazards – Carbon Dioxide
• CO₂ Carbon Dioxide Properties, Uses, Applications
• Dry Ice information
• Trends in Atmospheric Carbon Dioxide (NOAA)
• "A War Gas That Saves Lives." Popular Science, June 1942, pp. 53–57.
• NASA's Orbiting Carbon Observatory
• The on-line catalogue of CO₂ natural emissions in Italy
• Reactions, Thermochemistry, Uses, and Function of Carbon Dioxide
• Carbon Dioxide – Part One and Carbon Dioxide – Part Two at The Periodic Table of Videos (University of Nottingham)

Oxides Mixed oxidation states Antimony tetroxide (Sb2O4) Cobalt(II,III) oxide (Co3O4) Iron(II,III) oxide (Fe3O4) Lead(II,IV) oxide (Pb3O4) Manganese(II,III) oxide (Mn3O4) Silver(I,III) oxide (Ag2O2) Triuranium octoxide (U3O8) +1 oxidation state Copper(I) oxide (Cu2O) Dicarbon monoxide (C2O) Dichlorine monoxide (Cl2O) Lithium oxide (Li2O) Potassium oxide (K2O) Rubidium oxide (Rb2O) Silver oxide (Ag2O) Thallium(I) oxide (Tl2O) Sodium oxide (Na2O) Water (hydrogen oxide) (H2O) +2 oxidation state Aluminium(II) oxide (AlO) Barium oxide (BaO) Beryllium oxide (BeO) Cadmium oxide (CdO) Calcium oxide (CaO) Carbon monoxide (CO) Chromium(II) oxide (CrO) Cobalt(II) oxide (CoO) Copper(II) oxide (CuO) Iron(II) oxide (FeO) Lead(II) oxide (PbO) Magnesium oxide (MgO) Mercury(II) oxide (HgO) Nickel(II) oxide (NiO) Nitric oxide (NO) Palladium(II) oxide (PdO) Strontium oxide (SrO) Sulfur monoxide (SO) Disulfur dioxide (S2O2) Tin(II) oxide (SnO) Titanium(II) oxide (TiO) Vanadium(II) oxide (VO) Zinc oxide (ZnO) +3 oxidation state Aluminium oxide (Al2O3) Antimony trioxide (Sb2O3) Arsenic trioxide (As2O3) Bismuth(III) oxide (Bi2O3) Boron trioxide (B2O3) Chromium(III) oxide (Cr2O3) Dinitrogen trioxide (N2O3) Erbium(III) oxide (Er2O3) Gadolinium(III) oxide (Gd2O3) Gallium(III) oxide (Ga2O3) Holmium(III) oxide (Ho2O3) Indium(III) oxide (In2O3) Iron(III) oxide (Fe2O3) Lanthanum oxide (La2O3) Lutetium(III) oxide (Lu2O3) Nickel(III) oxide (Ni2O3) Phosphorus trioxide (P4O6) Promethium(III) oxide (Pm2O3) Rhodium(III) oxide (Rh2O3) Samarium(III) oxide (Sm2O3) Scandium oxide (Sc2O3) Terbium(III) oxide (Tb2O3) Thallium(III) oxide (Tl2O3) Thulium(III) oxide (Tm2O3) Titanium(III) oxide (Ti2O3) Tungsten(III) oxide (W2O3) Vanadium(III) oxide (V2O3) Ytterbium(III) oxide (Yb2O3) Yttrium(III) oxide (Y2O3) +4 oxidation state Carbon dioxide (CO2) Carbon trioxide (CO3) Cerium(IV) oxide (CeO2) Chlorine dioxide (ClO2) Chromium(IV) oxide (CrO2) Dinitrogen tetroxide (N2O4) Germanium dioxide (GeO2) Hafnium(IV) oxide (HfO2) Lead dioxide (PbO2) Manganese dioxide (MnO2) Nitrogen dioxide (NO2) Plutonium(IV) oxide (PuO2) Rhodium(IV) oxide (RhO2) Ruthenium(IV) oxide (RuO2) Selenium dioxide (SeO2) Silicon dioxide (SiO2) Sulfur dioxide (SO2) Tellurium dioxide (TeO2) Thorium dioxide (ThO2) Tin dioxide (SnO2) Titanium dioxide (TiO2) Tungsten(IV) oxide (WO2) Uranium dioxide (UO2) Vanadium(IV) oxide (VO2) Zirconium dioxide (ZrO2) +5 oxidation state Antimony pentoxide (Sb2O5) Arsenic pentoxide (As2O5) Dinitrogen pentoxide (N2O5) Niobium pentoxide (Nb2O5) Phosphorus pentoxide (P2O5) Tantalum pentoxide (Ta2O5) Vanadium(V) oxide (V2O5) +6 oxidation state Chromium trioxide (CrO3) Molybdenum trioxide (MoO3) Rhenium trioxide (ReO3) Selenium trioxide (SeO3) Sulfur trioxide (SO3) Tellurium trioxide (TeO3) Tungsten trioxide (WO3) Uranium trioxide (UO3) Xenon trioxide (XeO3) +7 oxidation state Dichlorine heptoxide (Cl2O7) Manganese heptoxide (Mn2O7) Rhenium(VII) oxide (Re2O7) Technetium(VII) oxide (Tc2O7) +8 oxidation state Osmium tetroxide (OsO4) Ruthenium tetroxide (RuO4) Xenon tetroxide (XeO4) Iridium tetroxide (IrO4) Hassium tetroxide (HsO4) Related Oxocarbon Suboxide Oxyanion Ozonide Oxides are sorted by oxidation state. Category:Oxides

Oxocarbons Common oxides CO 2 CO Exotic oxides CO 3 CO 4 CO 5 CO 6 C 2O C 2O 2 C 2O 3 C 2O 4 C 2O 4 C 3O 2 C 3O 3 C 3O 6 C 4O 2 C 4O 4 C 4O 6 C 5O 2 C 5O 5 C 6O 6 C 6O 6 C 8O 8 C 9O 9 C 10O 8 C 10O 10 C 12O 6 C 12O 9 C 12O 12 Polymers Graphite oxide C3O2 CO CO2 Compounds derived from oxides Metal carbonyls Carbonic acid Bicarbonates Carbonates Dicarbonates Tricarbonates

Global warming and climate change   Temperatures Brightness temperature Geologic record Hiatus Historical climatology Instrumental record Paleoclimatology Paleotempestology Proxy data Record of the past 1,000 years Satellite measurements   Causes Anthropogenic Attribution of recent climate change Aviation Biofuel Black carbon Carbon dioxide Deforestation Earth's energy budget Earth's radiation balance Ecocide Fossil fuel Global dimming Global-warming potential Greenhouse effect (Infrared window) Greenhouse gases (Halocarbons) Land use, land-use change and forestry Radiative forcing Tropospheric ozone Urban heat island Natural Albedo Bond events Climate oscillations Climate sensitivity Cloud forcing Cosmic rays Feedbacks Glaciation Global cooling Milankovitch cycles Ocean variability AMO ENSO IOD PDO Orbital forcing Solar variation Volcanism Models Global climate model   History History of climate change science Atmospheric thermodynamics Svante Arrhenius James Hansen Charles David Keeling   Opinion and climate change Environmental ethics Media coverage of climate change Public opinion on climate change (Popular culture) Scientific opinion on climate change Scientists opposing the mainstream assessment Climate change denial Global warming conspiracy theory By country & region (Africa Arctic Australia Bangladesh Belgium Canada China Europe European Union Finland Grenada Japan Luxembourg New Zealand Norway Russia Scotland South Korea Sweden Tuvalu United Kingdom United States)   Politics Climate change denial (Manufactured controversy) Intergovernmental Panel on Climate Change (IPCC) United Nations Framework Convention on Climate Change (UNFCCC / FCCC) Global climate regime   Potential effects and issues General Abrupt climate change Anoxic event Arctic dipole anomaly Arctic haze Arctic methane release Climate change and agriculture Climate change and ecosystems Climate change and poverty Current sea level rise Drought Economics of global warming Effect on plant biodiversity Effects on humans Effects on marine mammals Environmental migrant Extinction risk from global warming Fisheries and climate change Forest dieback Iris hypothesis Ocean acidification Ozone depletion Physical impacts Polar stratospheric cloud Regime shift Retreat of glaciers since 1850 Runaway climate change Season creep Shutdown of thermohaline circulation By country Australia India Nepal (South Asia) United States   Mitigation Kyoto Protocol Clean Development Mechanism Joint Implementation Bali Road Map 2009 United Nations Climate Change Conference Governmental European Climate Change Programme G8 Climate Change Roundtable United Kingdom Climate Change Programme Emissions reduction Carbon credit Carbon-neutral fuel Carbon offset Carbon tax Emissions trading Fossil-fuel phase-out Carbon-free energy Carbon capture and storage Efficient energy use Low-carbon economy Nuclear power Renewable energy Personal Individual action on climate change Simple living Other Carbon dioxide removal Carbon sink Climate change mitigation scenarios Climate engineering Individual and political action on climate change Reducing emissions from deforestation and forest degradation Urban reforestation   Proposed adaptations Strategies Damming glacial lakes Desalination Drought tolerance Irrigation investment Rainwater storage Sustainable development Weather modification Programmes Avoiding dangerous climate change Land Allocation Decision Support System Glossary of climate change Index of climate change articles Category:Climate change Category:Global warming Portal:Global warming

Molecules detected in outer space Molecules Diatomic Aluminium monochloride Aluminium monofluoride Aluminium monoxide Argon hydride Carbon monophosphide Carbon monosulfide Carbon monoxide Carborundum Cyanogen radical Diatomic carbon Fluoromethylidynium Hydrogen chloride Hydrogen fluoride Hydrogen (molecular) Hydroxyl radical Iron(II) oxide Magnesium monohydride cation Methylidyne radical Nitric oxide Nitrogen (molecular) Nitrogen monohydride Nitrogen sulfide Oxygen (molecular) Phosphorus monoxide Phosphorus nitride Potassium chloride Silicon carbide Silicon mononitride Silicon monoxide Silicon monosulfide Sodium chloride Sodium iodide Sulfur monohydride Sulfur monoxide Titanium oxide Triatomic Aluminium hydroxide Aluminium isocyanide Amino radical Carbon dioxide Carbonyl sulfide CCP radical Chloronium Diazenylium Dicarbon monoxide Ethynyl radical Formyl radical Hydrogen cyanide Hydrogen isocyanide (HCN) Hydrogen isocyanide (HNC) Hydrogen sulfide Hydroperoxyl Iron cyanide Isoformyl Magnesium cyanide Magnesium isocyanide Methylene radical N2H+ Nitrous oxide Nitroxyl Ozone Phosphaethyne Potassium cyanide Protonated molecular hydrogen Sodium cyanide Sodium hydroxide Silicon carbonitride c-Silicon dicarbide Silicon naphthalocyanine Sulfur dioxide Thioformyl Thioxoethenylidene Titanium dioxide Tricarbon Water Four atoms Acetylene Ammonia Cyanic acid Cyanoethynyl Cyclopropynylidyne Formaldehyde Fulminic acid HCCN Hydrogen peroxide Hydromagnesium isocyanide Isocyanic acid Isothiocyanic acid Methylene amidogen Methyl radical Propynylidyne Protonated carbon dioxide Protonated hydrogen cyanide Silicon tricarbide Thioformaldehyde Tricarbon monoxide Tricarbon sulfide Thiocyanic acid Five atoms Ammonium Ion Butadiynyl Carbodiimide Cyanamide Cyanoacetylene Cyanoformaldehyde Cyanomethyl Cyclopropenylidene Formic acid Isocyanoacetylene Ketene Methane Methoxy radical Methylenimine Propadienylidene Protonated formaldehyde Protonated formaldehyde Silane Silicon-carbide cluster Six atoms Acetonitrile Cyanobutadiynyl radical E-Cyanomethanimine Cyclopropenone Diacetylene Ethylene Formamide HC4N Ketenimine Methanethiol Methanol Methyl isocyanide Pentynylidyne Propynal Protonated cyanoacetylene Seven atoms Acetaldehyde Acrylonitrile Cyanodiacetylene Ethylene oxide Hexatriynyl radical Methylacetylene Methylamine Vinyl alcohol Eight atoms Acetic acid Aminoacetonitrile Cyanoallene Ethanimine Glycolaldehyde Heptatrienyl radical Hexapentaenylidene Methylcyanoacetylene Methyl formate Propenal Nine atoms Acetamide Cyanohexatriyne Cyanotriacetylene Dimethyl ether Ethanol Methyldiacetylene Octatetraynyl radical Propene Propionitrile Ten atoms or more Acetone Benzene Buckminsterfullerene (C60 fullerene) ("bucky-ball") C70 fullerene Cyanodecapentayne Cyanopentaacetylene Cyanotetra-acetylene Ethylene glycol Ethyl formate Methyl acetate Methyl-cyano-diacetylene Methyltriacetylene Propanal n-Propyl cyanide Pyrimidine Deuterated molecules Ammonia Ammonium ion Formaldehyde Formyl radical Heavy water Hydrogen cyanide Hydrogen deuteride Hydrogen isocyanide Methylacetylene N2D+ Trihydrogen cation Unconfirmed Anthracene Dihydroxyacetone Ethyl methyl ether Glycine Graphene H2NCO+ Linear C5 Naphthalene cation Phosphine Pyrene Silylidine Related Abiogenesis Astrobiology Astrochemistry Atomic and molecular astrophysics Chemical formula Circumstellar envelope Cosmic dust Cosmic ray Cosmochemistry Diffuse interstellar band Extraterrestrial life Extraterrestrial liquid water Forbidden mechanism Helium hydride ion Homochirality Intergalactic dust Interplanetary medium Interstellar medium Iron–sulfur world theory Kerogen Life Molecules in stars Nexus for Exoplanet System Science Organic compound Outer space PAH world hypothesis Panspermia Polycyclic aromatic hydrocarbon (PAH) RNA world hypothesis Spectroscopy Tholin Book:Chemistry Category:Astrochemistry Category:Molecules Portal:Astrobiology Portal:Chemistry

Inorganic compounds of carbon and related ions Compounds CBr4 CCl4 CF CF4 CI4 CO CO2 CO3 COS CS CS2 CSe2 C3O2 C3S2 CH4 C2H6 C3H8 C4H10 C5H12 C6H14 C7H16 C8H18 C6H6 SiC Carbon ions Carbides [:C≡C:]2–, [::C::]4–, [:C=C=C:]4– Cyanides [:C≡N:]– Cyanates [:O-C≡N:]– Thiocyanates [:S-C≡N:]– Fulminates [:C≡N-O:]– Thiofulminates [:C≡N-S:]– Oxides and related Oxides Metal carbonyls Carbonic acid Bicarbonates Carbonates