Breguet-Richet Gyroplane

Gyroplane No.I and No.II
Breguet-Richet Gyroplane No.1, 1907.
Role Rotary-wing test vehicle
Manufacturer Breguet
Designer Louis Breguet
First flight 29 September 1907
Number built 2


The Breguet-Richet Gyroplane was an early French experimental quadcopter rotary-wing aircraft developed by Breguet Aviation.

Design and development

The Gyroplane No.I was one of the earliest attempts to create a practical rotary-wing aircraft. It was designed by the Breguet brothers with help from Professor Charles Richet. The aircraft had an uncovered open steel framework with a seat for the pilot and a powerplant at the centre. Radiating from the central structure were four wire-braced tubular steel arms, each bearing a superimposed pair of four-bladed rotors. To eliminate the torque effect, two rotor set were driven clockwise and two counter-clockwise.

Operational service

On 29 September 1907, Gyroplane No.I was flown for the first time, albeit to an elevation of only 0.6 metres (2.0 ft).[1] It was not a free flight, as four men were used to steady the structure. It was neither controllable nor steerable, but it was the first time a rotary-wing device had lifted itself and a pilot into the air.[1] It later flew up to 1.52 m (4.99 ft) above the ground. The design was improved and Gyroplane No.II appeared the following year. No.II had two two-blade rotors of 7.85 m (25.75 ft) diameter and also had fixed wings. Powered by a 41 kW (55 hp) Renault engine, it was reported to have flown successfully more than once in 1908. No.II was damaged in a heavy landing and was rebuilt as the No.IIbis. It flew at least once in April 1909 before being destroyed when the company's works were badly damaged in a severe storm.

Specifications (No.I)

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

References

Wikimedia Commons has media related to Breguet aircraft.
Notes
  1. ↑ 1.0 1.1 Young 1982, p. 28.
Bibliography