Boudinage

Small-scale Boudinage
Boudinaged quartz vein within blueschist, Samos, Greece.
Boudinage in Greenland near Kangerlussuaq
Boudinaged quartz vein in shear foliation, Starlight Pit, Fortnum Gold Mine, Western Australia.
Banded gneiss with dike of granite orthogneiss; competent banded gneiss is boudinaged by ductile shear.

Boudinage is a geological term for structures formed by extension, where a rigid tabular body such as hornfels, is stretched and deformed amidst less competent surroundings.[1] The competent bed begins to break up, forming sausage-shaped boudins. Boudinage is common and can occur at any scale, from microscopic to lithopheric, and can be found in all terranes.[2] In lithospheric-scale tectonics, boudinage of strong layers can signify large-scale creep transfer of rock matter.[2] The study of boudinage can, also, help provide insight to the forces involved in tectonic deformation of rocks and their strength.[2]

Boudinage can develop in two ways: planar fracturing into rectangular fragments or by necking or tapering into elongate depressions and swells.[3] Boudins are typical features of sheared veins and shear zones where, due to stretching along the shear foliation and shortening perpendicular to this, rigid bodies break up. This causes the resulting boudin to be its characteristic sausage or barrel shape. They can also form rectangular structures. ductile deformation conditions also encourage boudinage rather than imbricate fracturing. Boudins can become separated by fractures or vein material, this zone of separation is known as boudin necks.[3]

In three dimensions, the boudinage may take the form of ribbon-like boudins or chocolate-tablet boudins, depending on the axis and isotropy of extension. They range in size from about 20 m thick to about 1 cm.[4]

Types

There are three different types of boudinage. These include no-slip boudinage, s-slip boudinage, and a-slip boudinage. No-slip boudinage occurs when there is no slip, resulting in a symmetrical structure. S-slip boudinage occurs when the boudin moves in opposition to the shear movement, where A-slip occurs when it moves with the direction of the shear. These types can be further classified into 5 different groups with relation to their general shape. These groups are drawn, torn, domino, gash and shearband boudins. In general, drawn and torn shapes form where there is a no-slip bouninage, domino and gash boudins by A-slip and shearband boudins by S-slip boudinage.[5]

Etymology

Lohest (1909) coined the term boudinage which is derived from the French word "boudin", meaning blood sausage. Boudins were first observed and described by Belgian geologists in the Collignon quarry near Bastogne in the Ardennes (Belgium).

References

  1. ↑ Fossen, H. (2010). Structural Geology. Cambridge University Press. p. 272. ISBN 978-0-521-51664-8. Retrieved 1 April 2011.
  2. ↑ 2.0 2.1 2.2 Marques, Fernando O., Pedro D. Fonseca, Sarah Lechmann, Jean-Pierre Burg, Ana S. Marques, Alexandre J.m. Andrade, and Carlos Alves. "Boudinage in Nature and Experiment." Tectonophysics 526-529 (2012): 88-96.
  3. ↑ 3.0 3.1 Arslan, Arzu, Cees W. Passchier, and Daniel Koehn. "Foliation Boudinage." Journal of Structural Geology 30.3 (2008): 291-309.
  4. ↑ "boudinage." Encyclopædia Britannica. 2010. Encyclopædia Britannica Online. 06 Oct. 2010 <http://www.britannica.com/EBchecked/topic/75420/boudinage>.
  5. ↑ Goscombe, B.D.; Passchier C.W.; Hand M. (2004). "Boudinage classification: end-member boudin types and modified boudin structures". Journal of Structural Geology 26: 739–763. Bibcode:2004JSG....26..739G. doi:10.1016/j.jsg.2003.08.015. Retrieved 6 October 2010.

Urai, J. L., Spaeth, G., van der Zee, W. & Hilgers, C. 2001. Evolution of Mullion (Boudin) structures in the Variscan of the Ardennes and Eifel. In: Jessell, M. J. 2001. General Contributions: 2001. Journal of the Virtual Explorer, 3, 1-16 http://www.virtualexplorer.com.au/journal/2001/03/urai/

Wikimedia Commons has media related to Boudinage.