Blackshape Prime

Prime
Role Ultralight aircraft
National origin Italy
Manufacturer Blackshape
First flight 2007
Introduction 2009
Status In production
Unit cost
134,000 (assembled, 2011)
Developed from Millennium Master

The Blackshape Prime is an Italian ultralight aircraft, produced by Blackshape Aircraft, the company founded in Monopoli by Luciano Belviso and Angelo Petrosillo. The aircraft first flew in 2007 and was introduced at the Aero show held in Friedrichshafen in 2009. It is supplied as a complete ready-to-fly-aircraft.[1]

Design and development

The Prime started as the Millennium Master, but the design was later acquired and further developed by Blackshape. The aircraft was designed to comply with the Fédération Aéronautique Internationale microlight rules. It features a cantilever low-wing, a two-seats-in-tandem enclosed cockpit under a bubble canopy, retractable tricycle landing gear and a single engine in tractor configuration.[1]

The aircraft is made from pre-preg carbon fibre. Its 7.94 m (26.0 ft) span wing has an area of 9.96 m2 (107.2 sq ft) and double slotted flaps. The standard engine available is the 100 hp (75 kW) Rotax 912ULS four-stroke powerplant, driving a two bladed constant speed propeller, which gives it a maximum level speed of 300 km/h (186 mph) and a cruise speed of 275 km/h (171 mph).[1]

Specifications (Prime)

Data from Bayerl and Blackshape[1][2]

General characteristics

Performance

References

  1. 1.0 1.1 1.2 1.3 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 33. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  2. Blackshape (2011). "Specs". Retrieved 13 May 2012.

External links

Wikimedia Commons has media related to Blackshape Prime.