Biomimetic materials

Biomimetic materials are materials developed using inspiration from nature. This may be useful in the design of composite materials. Natural structures have inspired and innovated human creations. Notable examples of these natural structures include: honeycomb structure of the beehive, strength of spider silks, bird flight mechanics, and shark skin water repellency.[1]

Tissue Engineering

Biomimetic materials in tissue engineering are materials that have been designed such that they elicit specified cellular responses mediated by interactions with scaffold-tethered peptides from extracellular matrix (ECM) proteins; essentially, the incorporation of cell-binding peptides into biomaterials via chemical or physical modification.[2] Amino acids located within the peptides are used as building blocks by other biological structures. These peptides are often referred to as "self-assembling peptides", since they can be modified to contain biologically active motifs. This allows them to replicate information derived from tissue and to reproduce the same information independently. Thus, these peptides act as building blocks capable of conducting multiple biochemical activities, including tissue engineering.[3] It should be noted that tissue engineering research currently being performed on both short chain and long chain peptides is still in early stages.

Such peptides include both native long chains of ECM proteins as well as short peptide sequences derived from intact ECM proteins. The idea is that the biomimetic material will mimic some of the roles that an ECM plays in neural tissue. In addition to promoting cellular growth and mobilization, the incorporated peptides could also mediate by specific protease enzymes or initiate cellular responses not present in a local native tissue.[2]

In the beginning, long chains of ECM proteins including fibronectin (FN), vitronectin (VN), and laminin (LN) were used, but more recently the advantages of using short peptides have been discovered. Short peptides are more advantageous because, unlike the long chains that fold randomly upon adsorption causing the active protein domains to be sterically unavailable, short peptides remain stable and do not hide the receptor binding domains when adsorbed. Another advantage to short peptides is that they can be replicated more economically due to the smaller size. A bi-functional cross-linker with a long spacer arm is used to tether peptides to the substrate surface. If a functional group is not available for attaching the cross-linker, photochemical immobilization may be used.[2]

In addition to modifying the surface, biomaterials can be modified in bulk, meaning that the cell signaling peptides and recognition sites are present not just on the surface but also throughout the bulk of the material. The strength of cell attachment, cell migration rate, and extent of cytoskeletal organization formation is determined by the receptor binding to the ligand bound to the material; thus, receptor-ligand affinity, the density of the ligand, and the spatial distribution of the ligand must be carefully considered when designing a biomimetic material.[2]

Biomimetic mineralization

Proteins of the developing enamel extracellular matrix (such as Amelogenin) control initial mineral deposition (nucleation) and subsequent crystal growth, ultimately determining the physico-mechanical properties of the mature mineralized tissue.[4]

Mutations in enamel ECM proteins result in enamel defects such as amelogenesis imperfect.[5] [6] Type-I collagen is thought to have a similar role for the formation of dentin and bone.

Nucleators bring together mineral ions from the surrounding fluids (such as saliva) into the form of a crystal lattice structure, by stabilizing small nucleii to permit crystal growth, forming mineral tissue.

Dental enamel mineral (as well as dentin and bone) is made of hydroxylapatite with foreign ions incorporated in the structure.

Carbonate, fluoride, and magnesium are the most common heteroionic substitutents.[7]

In a biomimetic mineralization strategy based on normal enamel histogenesis, a three-dimensional scaffold is formed to attract and arrange calcium and/or phosphate ions to induce de novo precipitation of hydroxylapatite.[8]

Two general strategies have been applied. One is using fragments known to support natural mineralization proteins, such as Amelogenin, Collagen, or Dentin Phosphophoryn as the basis.[9] Alternatively, de novo macromolecular structures have been designed to support mineralization, not based on natural molecules, but on rational design.[10]

Extracellular matrix proteins

Many studies utilize laminin-1 when designing a biomimetic material. Laminin is a component of the extracellular matrix that is able to promote neuron attachment and differentiation, in addition to axon growth guidance. Its primary functional site for bioactivity is its core protein domain isoleucine-lysine-valine-alanine-valine (IKVAV), which is located in the α-1 chain of laminin.[11]

A recent study by Wu, Zheng et al., synthesized a self-assembled IKVAV peptide nanofiber and tested its effect on the adhesion of neuron-like pc12 cells. Early cell adhesion is very important for preventing cell degeneration; the longer cells are suspended in culture, the more likely they are to degenerate. The purpose was to develop a biomaterial with good cell adherence and bioactivity with IKVAV, which is able to inhibit differentiation and adhesion of glial cells in addition to promoting neuronal cell adhesion and differentiation.[11] The IKVAV peptide domain is on the surface of the nanofibers so that it is exposed and accessible for promoting cell contact interactions. The IKVAV nanofibers promoted stronger cell adherence than the electrostatic attraction induced by poly-L-lysine, and cell adherence increased with increasing density of IKVAV until the saturation point was reached. IKVAV does not exhibit time dependent effects because the adherence was shown to be the same at 1 hour and at 3 hours.[11]

Laminin is known to stimulate neurite outgrowth and it plays a role in the developing nervous system. It is known that gradients are critical for the guidance of growth cones to their target tissues in the developing nervous system. There has been much research done on soluble gradients; however, little emphasis has been placed on gradients of substratum bound substances of the extracellular matrix such as laminin.[12] Dodla and Bellamkonda, fabricated an anisotropic 3D agarose gel with gradients of coupled laminin-1 (LN-1). Concentration gradients of LN-1 were shown to promote faster neurite extension than the highest neurite growth rate observed with isotropic LN-1 concentrations. Neurites grew both up and down the gradients, but growth was faster at less steep gradients and was faster up the gradients than down the gradients.[12]

Biomimetic artificial muscles

Electroactive polymers (EAPs) are also known as artificial muscles. EAPs are polymeric materials and they are able to produce large deformation when applied in an electric field. This provides large potential in applications in biotechnology and robotics, sensors, and actuators.[13]

References

  1. "7 Amazing Examples of Biomimicry". Retrieved 28 July 2014.
  2. 2.0 2.1 2.2 2.3 Shin, H., S. Jo, and A.G. Mikos, Biomimetic materials for tissue engineering. Biomaterials, 2003. 24: p. 4353-5364.
  3. Cavalli, Silvia (2009). "Amphiphilic peptides and their cross-disciplinary role as building blocks for nanoscience" (PDF). Chemical Society Reviews (Barcelona Science Park). doi:10.1039/b906701a. Retrieved 3 October 2013.
  4. Simmer, J.P. and Fincham, A. G. (1995). "Molecular Mechanisms of Dental Enamel Formation". Critical Reviews in Oral Biology & Medicine 6 (2): 84–108. doi:10.1177/10454411950060020701.
  5. Wright, J. T., Hart, P. S. et al. (2003). "Relationship of phenotype and genotype in X-linked amelogenesis imperfecta". Connective Tissue Research 44 (1): 72–78. doi:10.1080/03008200390152124.
  6. Kim, J. W., Seymen, F. et al. (March 2005). "ENAM Mutations in Autosomal-dominant Amelogenesis Imperfecta". Journal of Dental Research 84 (3): 278–282. doi:10.1177/154405910508400314.
  7. Robinson, C., Kirkham, J., and Shore, R. (1995). Dental enamel formation to destruction. Boca Raton: CRC. ISBN 978-0849345890.
  8. Palmer, L. C., Newcomb, C. J. et al. (November 2008). "Biomimetic systems for hydroxyapatite mineralization inspired by bone and enamel". Chemical Reviews 108 (11): 4754–4783. doi:10.1021/cr8004422.
  9. Sfeir, C., Lee, D. et al. (February 2011). "Expression of phosphophoryn is sufficient for the induction of matrix mineralization by mammalian cells". The Journal of Biological Chemistry 286: 20228–20238. doi:10.1074/jbc.M110.209528.
  10. Kirkham, J., Firth, A. et al. (May 2007). "Self-assembling peptide scaffolds promote enamel remineralization". Journal of Dental Research 86 (5): 426–430. doi:10.1177/154405910708600507.
  11. 11.0 11.1 11.2 Wu, Y., et al., Self-assembled IKVAV peptide nanofibers promote adherence of PC12 cells. Journal of Huazhong University of Science and Technology, 2006. 26(5): p. 594-596.
  12. 12.0 12.1 Dodla, M.C. and R.V. Bellamkonda, Anisotropic scaffolds facilitate enhanced neurite extension "in vitro". Journal of Biomedical Materials Research. Part A, 2006. 78: p. 213-221.
  13. Kim, K.J. et al. (2013) Biomimetic Robotic Artificial Muscles. World Scientific Publishing. |url: http://www.worldscientific.com/worldscibooks/10.1142/8395.