Barrows Bearhawk
| Bearhawk | |
|---|---|
 | |
| Role | Amateur-built aircraft |
| National origin | United States |
| Manufacturer | R&B Aircraft AviPro Aircraft Bearhawk Aircraft |
| Designer | Bob Barrows |
| Introduction | mid-1990s |
| Status | In production (2012) |
| Number built | 78 (Bearhawk and Patrol models) |
| Unit cost |
US$35,295 (kit only, 2011) |
| Variants | Barrows Bearhawk Patrol Bearhawk LSA |
.jpg)
The Barrows Bearhawk is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.[1][2][3]
Design and development
The Bearhawk was designed as a personal project by Barrows to carry aircraft engines for delivery as freight. It features a strut-braced high-wing a four seat enclosed cabin that is 42.5 in (108 cm) wide and accessed by doors, fixed conventional landing gear and a single engine in tractor configuration.[1]
The aircraft fuselage is made from welded steel tubing covered in doped aircraft fabric, while the wings are made from aluminum sheet. Its 33 ft (10.1 m) span wing employs a NACA 4412 mod airfoil, has an area of 180 sq ft (17 m2) and mounts flaps. The aircraft's recommended engine power range is 150 to 260 hp (112 to 194 kW) and standard engines used include the 180 hp (134 kW) Lycoming O-360 and 250 hp (186 kW) Lycoming O-540 four-stroke powerplants. Construction time from the supplied kit is 1200 hours.[1][4]
The prototype was fitted with a 170 hp (127 kW) Lycoming O-360 burning automotive fuel.[3]
Operational history
By November 2012 66 examples had been registered in the United States with the Federal Aviation Administration and seven with Transport Canada.[5][6]
Variants
.jpg)
- Bearhawk
- Four seat model with a cabin 42.5 in (108 cm) wide and a gross weight of 2,700 lb (1,225 kg), with 75 reportedly completed and flown by December 2011.[1]
- Patrol
- Two-seats in tandem model with a cabin 32 in (81 cm) wide and a gross weight of 2,000 lb (907 kg), with three reportedly completed and flown by December 2011.[1]
Specifications (Bearhawk)
Data from Kitplanes[1]
General characteristics
- Crew: one
- Capacity: three passengers
- Length: 23.5 ft (7.2 m)
- Wingspan: 33 ft (10 m)
- Wing area: 180 sq ft (17 m2)
- Airfoil: NACA 4412 mod
- Empty weight: 1,400 lb (635 kg)
- Gross weight: 2,700 lb (1,225 kg)
- Fuel capacity: 50 U.S. gallons (190 L; 42 imp gal)
- Powerplant: 1 × Lycoming O-540 six cylinder, air-cooled, four stroke aircraft engine, 250 hp (190 kW)
- Propellers: 2-bladed constant speed
Performance
- Cruise speed: 155 mph (135 kn; 249 km/h)
- Stall speed: 40 mph (35 kn; 64 km/h)
- Range: 625 mi (543 nmi; 1,006 km)
- Rate of climb: 1,700 ft/min (8.6 m/s)
- Wing loading: 15 lb/sq ft (73 kg/m2)
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 44. Belvoir Publications. ISSN 0891-1851
- ↑ Bearhawk Aircraft (n.d.). "Bob Barrows Biography". Retrieved 1 November 2012.
- ↑ 3.0 3.1 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 232. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
- ↑ Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Retrieved 3 January 2012.
- ↑ Federal Aviation Administration (1 November 2012). "Make / Model Inquiry Results". Retrieved 1 November 2012.
- ↑ Transport Canada (1 November 2012). "Canadian Civil Aircraft Register". Retrieved 1 November 2012.
External links
 |
Wikimedia Commons has media related to Barrows Bearhawk. |
| ||||||
| ||||||||||||||||||||||