Autostick

The name Autostick has been used both for a Volkswagen semi-auto transmission and a system designed by Chrysler which allows for manual selection of gears with an automatic transmission. Another similar system designed by Porsche is called Tiptronic. These systems are also called "Manu-Matic" transmissions.

Volkswagen Autostick

Marketed as the Volkswagen Automatic Stickshift, the three speed manual transmission was connected to a vacuum-operated automatic clutch. The top of the gear shift was designed to easily depress and activate an electric switch, i.e. when engaged by the drivers hand. When pressed, the switch operated a 12 volt solenoid in turn operating the vacuum clutch, thus disengaging the clutch and allowing shifting between gears. With the driver's hand removed from the gearshift, the clutch would re-engage automatically. The transmission was also equipped with a torque converter, allowing the car to idle in gear, like an automatic. The torque converter was operated by transmission fluid. This would allow the car to stop in any gear and start from a standing stop in any gear.

The Autostick debuted on the 1968 Volkswagen Beetle and Karmann Ghia at mid-model year along with a fully independent rear suspension that debuted in August 1968 for the 1969 model year. VW ended Autostick production with the 1976 model year.

Chrysler Autostick

The Dodge Intrepid ES and Eagle Vision TSi were the first automobile models in North America that came equipped with the Autostick system as an option, later standard equipment on the 1997 Plymouth Prowler and 1999 Chrysler 300M. It was added to the JA cars on the 1997 Stratus. This system was standard on 1999 to 2003 model year Dodge Grand Caravan ES, but only the front-wheel drive models since the AWD used a different TCM. Many Chrysler models today come with this system, including the 300, 300C, Charger, Challenger, Sebring, PT Cruiser, Crossfire, Pacifica, Chrysler Town & Country, Dodge Avenger, Dodge Stratus R/T, Dodge Journey R/T and SXT and Dodge Grand Caravan.

System advantages

Ability to manually select gears
Ability to start from 2nd or 3rd in inclement weather to improve traction
Allows downshifting while coming down steep inclines to maintain speed
Improved performance with quicker, more firm shifts

System components and operation

Components of the Autostick system in the first Chrysler vehicles to have the design included a different TCM (Transmission Control Module), shift assembly utilizing a unique PRNDL design invented by Peter Gruich in 1994, and gauge cluster. The gauge cluster includes a read-out to let the driver know which gear is selected.

The system works by dropping the shifter down into a gated area on the shift assembly which allows the shifter to be pushed to the right (up-shift) or to the left (down-shift). When the driver pushes the shifter in either of these directions the assembly sends a signal to the TCM to shift up, or down depending on the driver's actions. Dropping the shifter into the Autostick gate while the vehicle is moving will simply keep the vehicle in the current gear selected.

For the column-shift third- and fourth-generation Dodge Grand Caravan ES (1999-2003, Front-wheel drive models only), the system is activated and deactivated when a button on the end of the end of the shifter. Gear selection is executed via a toggle switch mounted near the on/off switch on the shifter, clicking up to upshift and down to downshift.

System failsafes