Anomalocaris

Anomalocaris Temporal range: Early to mid Cambrian: Chengjiang–Burgess shale PreꞒ Ꞓ O S D C P T J K Pg N
Image of the first complete Anomalocaris fossil found, residing in the Royal Ontario Museum
Scientific classification
Kingdom:	Animalia
Stem-group:	Arthropoda
Class:	†Dinocaridida
Order:	†Radiodonta
Family:	†Anomalocarididae
Genus:	†Anomalocaris Whiteaves 1892
Species
A. briggsi A. canadensis Whiteaves 1892 A. pennsylvanica Resser, 1929 (= A. canadensis?)[1] A. saron Hou, Bergström & Ahlberg, 1995
Synonyms
(Defunct species:)[1] A. lineata Resser & Howell, 1938 A. nathorsti (Walcott 1911)

Anomalocaris ("abnormal shrimp") is an extinct genus of anomalocaridid, a family of animals thought to be closely related to ancestral arthropods. The first fossils of Anomalocaris were discovered in the Ogygopsis Shale by Joseph Frederick Whiteaves, with more examples found by Charles Doolittle Walcott in the famed Burgess Shale.^[2] Originally several fossilized parts discovered separately (the mouth, feeding appendages and tail) were thought to be three separate creatures, a misapprehension corrected by Harry B. Whittington and Derek Briggs in a 1985 journal article.^[2][3]

Anatomy

Size comparison of Anomalocaris (red) and a human.

Anomalocaris is thought to have been a predator. It propelled itself through the water by undulating the flexible lobes on the sides of its body.^[4] Each lobe sloped below the one more posterior to it,^[5] and this overlapping allowed the lobes on each side of the body to act as a single "fin", maximizing the swimming efficiency.^[4] The construction of a remote-controlled model showed this mode of swimming to be intrinsically stable,^[6] meaning that Anomalocaris did not need a complex brain to manage balance while swimming. The body was widest between the third and fifth lobe and narrowed towards the tail; it had at least 11 lobes in total.^[5] It is difficult to distinguish lobes near the tail, making an accurate count difficult.^[5] Anomalocaris had a large head, a single pair of large, compound eyes on stalks comprising approximately 16,000 individual lenses,^[7][8] and an unusual, disk-like mouth. The mouth was composed of 32 overlapping plates, four large and 28 small, resembling a pineapple ring with the center replaced by a series of serrated prongs.^[2] The mouth could constrict to crush prey, but never completely close, and the tooth-like prongs continued down the walls of the gullet.^[9] Two large 'arms' (up to seven inches in length when extended^[9]) with barb-like spikes were positioned in front of the mouth.^[3] The tail was large and fan-shaped, and along with undulations of the lobes, was probably used to propel the creature through Cambrian waters.^[2][4][10] Stacked lamella of what were probably gills attached to the top of each lobe.

For the time in which it lived, Anomalocaris was a truly gigantic creature, reaching lengths of up to two meters.^[2]

Discovery

Anomalocaris "arm" (grasping claw, ~8.5 cm long) from the Walcott Quarry, Middle Cambrian, near Field, British Columbia, Canada.

Anomalocaris has been misidentified several times, in part due to its makeup of a mixture of mineralized and unmineralized body parts; the mouth and feeding appendage was considerably harder and more easily fossilized than the delicate body.^[9] Its name originates from a description of a detached 'arm', described by Joseph Frederick Whiteaves in 1892 as a separate crustacean-like creature due to its resemblance to the tail of a lobster or shrimp.^[9] The first fossilized anomalocarid mouth was discovered by Charles Doolittle Walcott, who mistook it for a jellyfish and placed it in the genus Peytoia. Walcott also discovered a second feeding appendage but failed to realize the similarities to Whiteaves' discovery and instead identified it as feeding appendage or tail of the extinct Sidneyia.^[9] The body was discovered separately and classified as a sponge in the genus Laggania; a mouth was found with the body, but was interpreted by its discoverer Simon Conway Morris as an unrelated Peytoia that had through happenstance settled and been preserved with Laggania. Later, while clearing what he thought was an unrelated specimen, Harry B. Whittington removed a layer of covering stone to discover the unequivocally connected arm thought to be a shrimp tail and mouth thought to be a jellyfish.^[2][9] Whittington linked the two species, but it took several more years for researchers to realize that the continuously juxtaposed Peytoia, Laggania and feeding appendage actually represented a single, enormous creature.^[9] Because Peytoia was named first, it became the correct name for the entire animal. The original feeding arm, however, came from a larger species distinct from Peytoia and "Laggania", which retains the name Anomalocaris.^[11]

Stephen Jay Gould cites Anomalocaris as one of the fossilized extinct species he believed to be evidence of a much more diverse set of phyla that existed in the Cambrian Period^[9] (discussed in his book Wonderful Life), a conclusion disputed by other paleontologists.^[2]

In 2011, six fossils of compound eyes dated to the Cambrian period (515 million years ago) were recovered from an archaeological dig at Emu Bay on Kangaroo Island, Australia. The eyes were the first found that belonged to Anomalocaris, proving that Anomalocaris was indeed an arthropod as had been suspected. The find also indicated that advanced arthropod eyes able to "tell friend or foe and detect features of the environment" had evolved very early, before the evolution of jointed legs or hardened exoskeletons. The eyes were 30 times more powerful than those of trilobites, long thought to have had the most advanced eyes of any contemporary species. With 30,000 lenses, the resolution of the 3 centimetres (1.2 in) wide eyes would have been rivalled only by that of the modern dragonfly, which has 28,000 lenses in each eye.^[12][13][14]

Ecology

Anomalocaris model, National Dinosaur Museum, Canberra, Australia.

Anomalocaris had a cosmopolitan distribution in Cambrian seas, and has been found from early to mid Cambrian deposits from Canada, China, Utah and Australia, to name but a few.^{[6][15][16][17]}

A long-standing view holds that Anomalocaris fed on hard-bodied animals, including trilobites. While its mid-gut glands strongly suggest a predatory lifestyle, its ability to penetrate mineralised shells has come under fire in recent years.^[18] Some Cambrian trilobites have been found with round or W-shaped "bite" marks, which were identified in shape with the mouthparts of Anomalocaris.^[16] At most one species, A. canadensis, is likely to have been capable of eating hard-skeletonized organisms; other species likely preyed on soft-bodied animals.^[19]

Stronger evidence that Anomalocaris ate trilobites comes from fossilised faecal pellets, which contain trilobite parts and are so large that the anomalocarids are the only known organism from that period large enough to have produced them.^[16] However, since Anomalocaris lacks any mineralised tissue, it seemed unlikely that it would be able to penetrate the hard, calcified shell of trilobites.^[16] Rather, the coprolites may have been produced by a different organism, such as a trilobite.^[19]

Anomalocaris canadensis mouthpiece (~5.25 x ~4.25 cm) from the Walcott Quarry, Burgess Shale. This was previously identified as a jellyfish, Peytoia nathorsti . Anomalocaris mouthpieces resemble pineapple rings.

One possibility is that anomalocaridids fed by grabbing one end of their prey in their jaws while using their appendages to quickly rock the other end of the animal back and forth. This produced stresses that exploited the weaknesses of arthropod cuticle, causing the prey's exoskeleton to rupture and allowing the predator to access its innards.^[16] This behaviour is thought to have provided an evolutionary pressure for trilobites to roll up, to avoid being flexed until they snapped.^[16] However, the lack of wear on anomalocarid mouthparts suggests they did not come into regular contact with mineralised trilobite shells. Computer modeling of the Anomalocaris mouthparts suggests they were, in fact, better suited to sucking on smaller, soft-bodied organisms (and could not have been responsible for many trilobite deformations).^[18][20]

The mouthparts of Anomalocaris are in fact not tetraradial like those of Peytoia, but have three major axes and a small central opening; thus this species probably fed by sucking up small items rather than biting hard-bodied organisms.^[21]

See also

• 8564 Anomalocaris, an asteroid, named after this animal
• Anomalocarididae, the classification group of anomalocaris
• Cambrian explosion
• Opabinia
• Wiwaxia

Footnotes

External links

Wikimedia Commons has media related to Anomalocaris.

• "Anomalocaris canadensis". Burgess Shale Fossil Gallery. Virtual Museum of Canada. 2011. 
• Anomalocaris 'homepage' with swimming animation
• Burgess Shale: Anomalocaris canadensis (proto-arthropod), Smithsonian.