American whiskey

American whiskey is a distilled beverage produced in the United States from a fermented mash of cereal grain.

The production and labeling of American whiskey are governed by Title 27 of the U.S. Code of Federal Regulations.

Outside of the United States, various other countries recognize certain types of American whiskey, such as Bourbon and Tennessee whiskey, as indigenous products of the United States that must be produced (although not necessarily bottled) in the United States. When sold in another country, American whiskey may also be required to conform to other local product requirements that apply to whiskey in general when sold in that country, which may in some aspects involve stricter standards than the U.S. law.

Canadian law also requires that products labeled as Bourbon or Tennessee Whiskey must satisfy the laws of the United States that regulate its manufacture "for consumption in the United States". Some other countries do not specify this requirement. This distinction can be important, as the U.S. regulations include substantial exemptions for products that are made for export rather than for consumption within the United States (C.F.R. Title 27, § 5, notably 5.2 and 5.3).

Types

The production line at the Maker's Mark distillery.

Some key types listed in the U.S. Code of Federal Regulations are:[1]

Unless the whiskey is labeled as blended,[2][3] to be labeled as one of the types listed above, the whiskey must be distilled to not more than 80% alcohol by volume (160 proof) to ensure that the flavor of the original mash is adequately retained, and the addition of coloring, caramel and flavoring additives is prohibited. All of these except corn whiskey must be aged (at least briefly, although no minimum aging period is specified) in charred new oak containers. These restrictions do not exist for some similarly named products in some other countries, such as Canada. American corn whiskey does not have to be aged at all – but, if it is aged, it must be aged in used or uncharred oak barrels.[4] In practice, if corn whiskey is aged it usually is aged in used bourbon barrels.

Whiskey aging in charred new oak barrels at the Jack Daniel's distillery.

Straight whiskey is whiskey that was distilled to not more than 80 percent alcohol by volume that has been aged for at least two years at a starting alcohol concentration of not more than 62.5% and has not been blended with any other spirits, colorings, or additives. A straight whiskey that also meets one of the other above definitions is referred to by combining the term "straight" with the term for the type of whiskey. For example, a rye whiskey that meets this definition is called a "straight rye whiskey". A straight whiskey that has been aged less than four years is required to be labeled with an age statement describing the actual age of the product.[5] Furthermore, a straight whiskey (or other spirit produced from a single class of materials) may be labelled as bottled in bond if it has been aged for at least four years in a federally bonded warehouse, is bottled at 100 proof, and is the product of one distilling season.[6]

Unqualified whiskey may be distilled to as much as 190 proof, must be stored in oak (for an unspecified time), bottled at not less than 80 proof, but may not state the grain on the label. This type of whiskey cannot be called straight.

Other types of American whiskey that are defined by federal regulations include the following:

However, it is important to note that these various labeling requirements and "standards of identity" do not apply to products for export from the U.S. (under C.F.R. Title 27, § 5.1). Thus, exported American whiskey may not meet the same labeling standards when sold in some markets.

Another important American whiskey labeling is Tennessee whiskey. There are only four brands of Tennessee whiskey that are currently bottled – Jack Daniel's, George Dickel, Benjamin Prichard's, and Collier and McKeel.[7] Three of the four brands of currently produced Tennessee whiskey use a production process that involves a filtering stage called the Lincoln County Process, in which the whiskey is filtered through a thick layer of maple charcoal before it is put into casks for aging. Tennessee whiskey is a recognized name defined under the North American Free Trade Agreement (NAFTA),[8] at least one other international trade agreement,[9] and the law of Canada[10] as a Straight Bourbon Whiskey lawfully produced in the state of Tennessee. In 2013, Tennessee House Bill 1084 was passed, requiring the Lincoln County process to be used for products produced in the state labeling themselves as "Tennessee Whiskey" with a particular exception tailored to exempt Prichard's, and included the existing requirements for bourbon.[11][12]

See also

References