Amal (carburettor)

Amal
Industry Motor
Headquarters Salisbury, Wiltshire
previously Birmingham, UK
Products Carburettors
previously also motorcycle controls
Website Burlen Ltd

AMAL were a British engineering company servicing the motorcycle and other light-engineering motor industries between 1927 and 1993[1] based in Birmingham, England.[2]

AMAL is a British carburettor trademark. Amal were the suppliers of carburettors to many marques within the British motorcycle industry[3] including the largest of British manufacturers, such as BSA and AMC, and to producers of small industrial engines.

The main carburettor types commonly associated with Amal are slide carburettors for motorcycles. These were historically distinguishable as two types, the Monobloc with integral float chamber and Concentric, a later development with repositioned float chamber directly under the body and air-slide.

Less-common types known as GP and TT were mainly for road-racing and other competition use, but were used on high-performance road machines such as BSA Gold Star, BSA Spitfire and Velocette Thruxton.

Amal also produced handlebars and control levers for the motorcycle industry,[2] via a subsidiary business, Lozells Engineering,[4] twist grips,[5] cables and wire, plus ICI silicone grease.[3][6] All AMAL chromium plated components were stated to be finished in "Nickel Chromium Plating, British Standard Approved."[3]

Amal's light-alloy levers with click-stop adjusters 509/001 brake and 509/002 clutch were taken-over by BSA and marketed under their 'Motoplas' accessories branding from 1967, with Doherty taking-over production of the traditional chromed-steel levers.[7]

With the decline of the British motorcycle industry the use of Amal carburettors declined, but they are still produced under different ownership as spares for the classic market.

Carburettor products

Besides carburettors for light-applications such as types 308 and 355 for Pedal Cycle Motors,[8] Amal historically had three popular carburettor designs: 'Standard' fitted up to 1955, 'Monobloc' fitted from 1955 and 'Concentric' fitted from 1967.[9]

The most historic - 76 & 276 Series (Amal 'Standard' series) can be spigot or flange fixing with adjustment screws on the left or right hand sides of the carburetter body. The available bore sizes are 15/16", 1" and 1 1/16" diameters. The 276 type carburetter is, in virtually all aspects, identical to the 76 version, except that the main emulsion air is drawn from inside the air intake (air filter) whilst the 76 carburetter uses unfiltered air. The 76 types are of diecast zinc construction and were introduced in the early 1930s, replacing the earlier 6 series, which were of bronze construction, although basically the same design. The 276 type was introduced in 1940 in an attempt to improve the carburetter's durability in dusty and dirty operating environments.

In the same design range were the 4 and 5 types with smaller bore sizes and the 29 type with larger bore sizes. These were replaced with the 74, 75 and 89 and then, later, by the 274, 275 and 289 types.

The 'Monobloc' type was available from 1955 with designations 375, 376 and 389[9]

Amal Concentric carburettor, one of two fitted to a Triumph Bonneville, with the second just visible to the rear

The more modern Concentric, developed and introduced for the 1967 Model Year, was initially designated 600 and 900.[2] The 600 series had bore sizes of 22mm, 24mm and 26mm, being known as 622, 624, and 626 respectively. Similarly, the 900 series with bore sizes of 28mm, 30mm and 32mm, were known as 628, 630, and 632 respectively.[10]

The largest bore at 32mm was slightly larger than any previous Monobloc, and all were flange-fitting with stud-holes at two-inch centres.[10]

The Concentric design with non-protruding float chamber was both slimmer and shorter, enabling easier mounting to two-port cylinder heads. Left or right sided carburettors could be produced from basically the same die-casting, and the design was compatible with up to 40 degrees of downdraught.[10]

Eventually three variants were produced: Mk1, Mk1.5 and Mk2

Company history

The AMAL company was formed in the late 1920s when three manufacturers almalgamated – Amac, Brown and Barlow and Binks – to manufacture carburettors and associated products under the name Amalgamated Carburetters Ltd.[1]

The name changed to Amal Ltd in 1931.[1] Amal subsequently became partly owned by IMI Group and the product range was expanded to include handlebars and controls with full IMI ownership by the middle 1960s.[1] It was sold after June 1973[11] to Grosvenor Works Ltd of North London - a supplier of fuel system components. Under Grosvenor some of the most popular obsolete ranges were remanufactured.[1]

In 2003, the business was sold to Burlen Fuel Systems Limited, a company that also produces SU, Solex and Zenith, three other "classic" carburettor ranges.

Amal carburetors were used on Cooper Formula 3 racing cars and racing motor cycles. Coopers fitted with the a J.A.P. 1,100 cc engine with such a carburetor were popular in hill climbs and sprints competitions and was used by the frequent champion in the 1960s; David Boshier Jones.[12]

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 Grace's Industrial Guide. Retrieved 2013-07-09
  2. ↑ 2.0 2.1 2.2 Motor Cycle, 10 November 1966, Earls Court Show Edition p.15 Amal factory advert – the 'new' Concentric and "wide range of controls, handlebars, etc. Amal Limited, Holdford Road, Witton, Birmingham 6." and p.632 Show Guide editorial, "New carburettors are rare...the neat 600 and 900 Concentric carbs are at Earls Court for the first time.". Accessed 2013-07-08
  3. ↑ 3.0 3.1 3.2 Motor Cycle, 7 April 1966, p.1. Amal factory advert – "Carburetters supplied suitable for all types of machines for every purpose. Backed by service throughout the world. All AMAL chromium plated components to BS1224/1965". Accessed 2013-07-10
  4. ↑ Motor Cycle, 9 September 1965. p.366 Brighton Show 'Bits and Pieces' "New name in the accessories field is Lozells Engineering, an Amal subsidiary, sharing stand space with the parent company and displaying a range of handlebars and levers." Accessed 2013-08-19
  5. ↑ Motor Cycle 23 September 1965 Brighton Show Round-up, p.433 "..twin rotor twist-grip (for twin carburettors, of course)...The Amal Type 313...uses a very solid-looking die-cast body..." Accessed 2013-08-07
  6. ↑ Motor Cycle, 24 November 1966, Earls Court Show Review edition p.697 Amal LMC-series clip-ons. Accessed 2013-07-09
  7. ↑ Motor Cycle 3 August 1967 p.1071 Amal – Motoplas levers "As distinct from the bulk of the erstwhile Amal control-lever range (now made by Doherty) manufacture of Amal solid light-alloy sports levers has been taken over by the BSA group. These will now be sold under the Motoplas name". Accessed 2013-08-09
  8. ↑ Grace's Industrial Guide Retrieved 2013-07-09
  9. ↑ 9.0 9.1 Motor Cycle Data Book, George Newnes Ltd, London, 1960. Accessed 2013-07-09
  10. ↑ 10.0 10.1 10.2 Motor Cycle, 1 September 1966, p.298 Monobloc Dethroned. Accessed 2013-07-25
  11. ↑ Motorcycle Mechanics, June 1973, p.23, "Amal the very breath of motor-cycling" "a subsidiary company of Imperial Metal Industries Ltd IMI"
  12. ↑ The J.A.P. Engine by A. C. Fenner and W. H. Phillips 1952 C Arthur Pearson Ltd.

External links