Alcan Lynemouth Aluminium Smelter
| Alcan Lynemouth Aluminium Smelter | |
|---|---|
 Alcan Lynemouth Smelter in July 2008 | |
| General information | |
| Type | Aluminium smelter |
| Location | Lynemouth, Northumberland, North East England |
| Inaugurated | 1974 |
| Cost | £54 million |
| Owner | Alcan |
The Alcan Lynemouth Aluminium Smelter is a mothballed industrial facility near Ashington, Northumberland, on the coast of North East England, 0.65 mi (1.05 km) south of the village of Lynemouth. The smelter is owned by Canadian aluminium company Alcan, which is part of Rio Tinto. The smelter was opened in 1974 at a cost of £54 million. It ceased production in March 2012.
Factors Determining the Smelter's Site
A variety of factors determined the smelter's position:
- The first was a source of electric power to smelt the aluminium. One tonne of aluminium requires the same amount of electricity that an average family uses in 20 years, so cheap power was needed.[1] In 1972 Alcan commissioned Lynemouth Power Station less than 200 m (660 ft) from the smelter's site, to fulfil its power needs. The station's site was convenient for access to the Ellington and Lynemouth coal mines nearby, which were also the fundamental reason for the nearby village's creation.[1] The power station has a 420 megawatt (MW) capacity, more than enough to meet the load requirements of the smelter.[2] The spare electricity is sold to the National Grid.
- Another factor was finding a labour force. Many coal mines in the area had shut down, leaving thousands of people there unemployed. Aluminium smelting is very labour-intensive, but the workforce in the local area were used to heavy work because of working in the mines. The British government also granted £28 million to the company to help reduce unemployment in the area.[1]
- Transport was another major factor as bauxite could not be found in the United Kingdom, only in places such as Jamaica and Australia.[1] The smelter's location had to be near a port with good transport links to the site. The town of Blyth, which is 4 mi (6.4 km) south of the smelter, already had a deep sea port. There was also a railway link from the port going directly to the power station, which was connected to the Alcan facility. The site also has good road links.[1]
Facts
- The smelter has two of the most efficient ring burners in the world, costing around £17 million each.
- The smelter is the only aluminium smelting site in Europe which rebuilds the smelter whilst still in production. It is a 100 day process which takes place every seven years.
- The smelter is provided with alumina by two trains a day from Blyth, each consisting of 21 waggons. The alumina is shipped to Blyth from Limerick in the Republic of Ireland.
Worries
When work first started on the site local farmers were worried that pollution from the smelter would ruin their crops and harm their livestock. To address their concerns Alcan decided to buy the land from them. Alcan now own over 4,500 acres (18 km2) of land in the local area and employ a farming director. The land is still used to grow crops and raise livestock.
In early 2005 residents of nearby villages were worried about the fate of the smelter when the only remaining local coal mine situated at Ellington, closed. However the smelter did not close and imports its coal from overseas or from mines in other parts of the country.
The emissions of the power plant connected to the smelter were another concern for the environment. In April 2010, the European Court of Justice decided that, in contrary to the claim of the UK Government, the power plant was subject to the emission limit values laid down in the 2001 Large Combustion Plant Directive. As a consequence, emissions of air polluting substances of the plant should now be reduced.
Closure
Production at the Lynemouth Smelter ended at 14:00 on 29 March 2012, following a 90-day consultation period. It closed in May 2012 putting 515 people out of work and causing a knock on effect in its local supply chain. Alcan cited rising energy costs due to emerging European environmental legislation as the reason, however no mention was made of effects (if any) on their other European aluminium plants, in France and Iceland. Another reason given for closing Lynemouth is that it apparently does not meet Rio Tinto's criterion of 40% rate of return from its businesses, despite being one of the most efficient aluminium smelters in the world. The 420MW coal power station continues to operate under new ownership.