ANSI C
ANSI C, also known as C89 and C90 depending on the year of ratification, refers to the family of successive standards published by the American National Standards Institute (ANSI) for the C programming language. Software developers writing in C are encouraged to conform to the standards, as doing so aids portability between compilers.
History and outlook
The first standard for C was published by ANSI. Although this document was subsequently adopted by International Organization for Standardization (ISO) and subsequent revisions published by ISO have been adopted by ANSI, the name ANSI C (rather than ISO C) is still more widely used. While some software developers use the term ISO C, others are standards body–neutral and use Standard C.
C89
In 1983, the American National Standards Institute formed a committee, X3J11, to establish a standard specification of C. After a long and arduous process, the standard was completed in 1989 and ratified as ANSI X3.159-1989 "Programming Language C." This version of the language is often referred to as "ANSI C". Later on sometimes the label "C89" is used to distinguish it from C99 but using the same labelling method.
C90
The same standard as C89 was ratified by the International Organization for Standardization as ISO/IEC 9899:1990, with only formatting changes,[1] which is sometimes referred to as C90. Therefore, the terms "C89" and "C90" refer to essentially the same language.
This standard has been withdrawn by both INCITS[2] and ISO/IEC.[3]
C95
In 1995 the ISO published an extension, called Amendment 1, for the ANSI-C standard. Its full name finally was ISO/IEC 9899/AMD1:1995 or nicknamed C95. Aside to error correction there were further changes to the language capabilities,[4][5] such as:
- Improvements to the support for multi byte and wide character char sets in the standard library.
- Addition of Digraphs to the language.
- Specification of standard macros for the alternative specification of operators, e.g.
and
for&&
. - Specification of the standard macro
__STDC_VERSION__
.
Preprocessor Test for C95 compatibility
#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199409L /* C95 compatible source code. */ #elif defined(__ANSI__) /* C89 compatible source code. */ #endif
C99
In March 2000, ANSI adopted the ISO/IEC 9899:1999 standard. This standard is commonly referred to as C99. Some notable additions to the previous standard include:
- New built-in data types:
long long
,_Bool
and_Complex
- Several new array features, including variable-length arrays and flexible array members
-
stdint.h
, which defines typedefs for fixed-width and minimum-width integral types -
restrict
keyword, used to guarantee that two or more pointers do not point to the same address - Improved compatibility with several C++ features, including inline functions and single-line comments
This standard has been withdrawn by ISO/IEC in favour of C11,[6] but is still approved by INCITS.
C11
"C11" is the latest standard for the C programming language. Notable features introduced over the previous standard include improved Unicode support and thread.h
, which defines a cross-platform multi-threading API.
Support from major compilers
ANSI C is now supported by almost all the widely used compilers. Most of the C code being written nowadays is based on ANSI C. Any program written only in standard C and without any hardware dependent assumptions is virtually guaranteed to compile correctly on any platform with a conforming C implementation. Without such precautions, most programs may compile only on a certain platform or with a particular compiler, due, for example, to the use of non-standard libraries, such as GUI libraries, or to the reliance on compiler- or platform-specific attributes such as the exact size of certain data types and byte endianness.
Compliance detectability
To mitigate the differences between K&R C and the ANSI C standard, the __STDC__
("standard c") macro can be used to split code into ANSI and K&R sections.
#if defined(__STDC__) && __STDC__ extern int getopt(int, char * const *, const char *); #else extern int getopt(); #endif
In the above example, a prototype is used in a function declaration for ANSI compliant implementations, while an obsolescent non-prototype declaration is used otherwise. Those are still ANSI-compliant as of C99. Note how this code checks both definition and evaluation: this is because some implementations may set __STDC__
to zero to indicate non-ANSI compliance.
Compilers supporting ANSI C
- Amsterdam Compiler Kit (C K&R and C89/90)
- ARM RealView
- Clang, using LLVM backend
- GCC (Full C89/90, C99 and C11)
- IBM XL C/C++ (C11, starting with version 12.1)[7]
- Intel's ICC
- LabWindows/CVI
- LCC
- OpenWatcom (C89/90 and some C99)
- Microsoft Visual C++ (C89/90 and some C99)
- Pelles C (C99 and C11. Windows only.)
- vbcc (C89/90 and C99)
References
- ↑ "Standards - Using the GNU Compiler Collection (GCC)". Retrieved 2012-06-24.
- ↑ http://www.techstreet.com/cgi-bin/detail?doc_no=incits_iso_iec%7C9899;product_id=232462
- ↑ "ISO/IEC 9899:1990 - Programming Languages -- C". Retrieved 2012-06-24.
- ↑ Clive D.W. Feather (2010-09-12). "A brief description of Normative Addendum 1".
- ↑ "ISO/IEC 9899:1990/Amd 1:1995". International Organization for Standardization. 2013-03-22.
- ↑ "ISO/IEC 9899:1999 - Programming Languages -- C". Retrieved 2012-06-24.
- ↑ Support for ISO C11 added to IBM XL C/C++ compilers
External links
- ISO C working group
- Draft ANSI C Standard (ANSI X3J11/88-090) (May 13, 1988), Third Public Review
- Draft ANSI C Rationale (ANSI X3J11/88-151) (Nov 18, 1988)
- C Information Bulletin #1 (ANSI X3J11/93-007) (May 27, 1992)
- ANSI C Yacc grammar
- Schreiner, Axel-Tobias. Object oriented programming with ANSI-C. Hanser. ISBN 3-446-17426-5. hdl:1850/8544.
- "ISO/IEC 9899:1999 Programming Languages -- C". American National Standards Institute.
- "ANSI Standards Action Vol. 36, #48" (PDF). American National Standards Institute. 2005-12-02.
|