1st Armoured Division (Australia)

Australian 1st Armoured Division

1st Armoured Division M3 Grant tanks in June 1942
Active 1941–1943
Country Australia Australia
Branch Army
Type Armoured
Battle honours None
Commanders
Notable
commanders
John Northcott
Horace Robertson

The Australian 1st Armoured Division was raised in 1941 as part of the Second Australian Imperial Force (AIF). While the Division was originally to be deployed to North Africa in late 1941, it was retained in Australia following the outbreak of the Pacific War. The 1st Armoured Division formed a key element of Australia's defences against a feared Japanese invasion and was disbanded in Western Australia in September 1943.

History

Formation

The decision to form the 1st Armoured Division was inspired by the success of mass tank tactics in Europe during the early stages of World War II.[1] The Australian War Cabinet approved the formation of an Armoured Division in July 1940,[2] and 1st Armoured Division was established on 1 July 1941 under the command of Major General John Northcott.[3] The Australian Armoured Corps was established at the same time, with the corps being formally gazetted on 9 July 1941.[4][5]

Upon its formation the 1st Armoured Division was established with two armoured brigades – the 1st and 2nd – each of three armoured regiments. These were supported by various corps troops including an armoured car regiment, a motor regiment which had been established from a light horse regiment, engineers, a field artillery regiment, an anti-tank battery and a logistics support group.[6] On paper, each armoured regiment was to be equipped with 10 scout cars, 46 cruiser tanks, and six support tanks; while the motor regiment was to be established with 14 scout cars and 44 Universal Carriers, and the armoured car regiment 12 scout cars and 58 armoured cars.[7]

During its early existence, the division faced several key challenges. The formation of an armoured division involved a massive expansion of Australia's armoured forces, with the result that the great majority of the division’s officers and soldiers had to be trained from scratch in newly established armoured warfare schools. This process was greatly complicated by the limited number of tanks which were available to the division, with the entire division having only eight light and 10 light cruiser tanks by December, and having to utilise 30 Universal Carriers for training. While the number of tanks available to the division slowly increased, it did not receive its full allocation of tanks until May 1942.[8]

Defence of Australia

Prior to the commencement of hostilities with Japan the 1st Armoured Division had been scheduled to deploy to the Middle East where it would be fully equipped and complete its training: the 1st Armoured Brigade was to embark for the Middle East in December 1941, with 2nd Armoured Brigade embarking in March 1942.[9] These plans were, however, dropped in early December 1941 when it was decided to retain the division in Australia to defend against the feared Japanese landings on the Australian mainland.[10] As an emergency measure the division's armoured regiments were equipped with Bren Carriers until sufficient tanks arrived.[11][12]

M3 Grants of the 1st Armoured Division at Puckapunyal, June 1942

Major General Horace Robertson replaced Northcott in April 1942[11] when Northcott was promoted to command the newly established II Corps. The 1st Armoured Division's armoured regiments were equipped with M3 Grant medium tanks and M3 Stuart light tanks in April and May 1942. Following this, the division was concentrated in northern New South Wales where it completed its training with a series of large exercises around Narrabri.[13] In January 1943, the division was moved to the area between Perth and Geraldton, Western Australia, where it formed part of III Corps to counter the perceived threat of a Japanese invasion of Western Australia.[14]

Disbandment

Due to the end of the Japanese threat to Australia and the unsuitability of large armoured formations in jungle warfare the 1st Armoured Division no longer had any real role by 1943. By this time, there was a manpower shortage in the Australian Army, which required a re-allocation of personnel and the gradual reduction of Australia's armoured units.[15][16] While the division was disbanded in September 1943, its 1st Armoured Brigade and other units was retained as the independent 1st Armoured Brigade Group.[17] This brigade group unit remained part of III Corps in Western Australia until its disbandment in September 1944.[18] The 4th Armoured Brigade,[19] which was established in March 1943 and included several regiments which had previously formed part of the 1st Armoured Division, provided all the Australian armoured units which saw action from 1943 until the end of the war.[20]

Former elements in action

While 1st Armoured Division never saw action as a complete formation, three regiments which were part of the division saw action in the South West Pacific Area, either while assigned to the division, or later. In September 1942, the 2/6th Armoured Regiment, equipped with M3 Stuart light tanks, was deployed to New Guinea, and subsequently saw action during the Battle of Buna–Gona.[21] During 1944–45, the 2/4th Armoured Regiment contributed squadron-sized elements to both the Bougainville campaign and Aitape–Wewak campaigns, equipped with Matilda tanks.[22] The 2/9th Armoured Regiment, also using Matildas, served in the Borneo campaign (1945), including the Australian amphibious landings at Tarakan, Sarawak, Brunei, Labuan and British Borneo in 1945.[23] Other armoured units, such as the 1st Armoured Regiment, which also took part in the Borneo campaign, were Militia units which had not formed part of the 1st Armoured Division.[24]

Order of battle

Order of battle upon formation

At the time of its formation in July 1941, 1st Armoured Division consisted of:[25]

Order of battle upon disbandment

At the time of the division's disbandment in September 1943 it consisted of:[26]

1st Armoured Brigade Group

From September 1943 to September 1944 the division’s former 1st Armoured Brigade group served as an independent brigade. In September 1943 the Brigade Group consisted of:[26]

See also

References

Citations
  1. Lambert 2012, p. 90.
  2. Lambert 2012, p. 91.
  3. Lambert 2012, p. 94.
  4. Handel 2003, p. 31.
  5. Hopkins 1993, p. 56.
  6. 6.0 6.1 "1 Australian Support Group". Order of Battle. Retrieved 30 October 2009.
  7. Hopkins 1993, p. 52.
  8. Lambert 2012, pp. 94–95.
  9. Hopkins 1993, p. 90.
  10. Lambert 2012, p. 93.
  11. 11.0 11.1 Lambert 2012, p. 95.
  12. Hopkins 1993, pp. 91–92.
  13. Lambert 2012, p. 96.
  14. Lambert 2012, pp. 96–97.
  15. Hopkins 1993, p. 125.
  16. Handel 2003, p. 37.
  17. Hopkins 1993, p. 129.
  18. Hopkins 1993, p. 328.
  19. Lambert 2012, p. 98.
  20. Handel 2003, p. 73.
  21. Handel 2003, p. 155.
  22. Handel 2003, p. 151.
  23. Handel 2003, p. 159.
  24. Handel 2003, pp. 163–164.
  25. Hopkins 1993, p. 325.
  26. 26.0 26.1 Hopkins 1993, p. 327.
Bibliography
  • Handel, Paul (2003). Dust, Sand & Jungle: A History of Australian Armour During Training and Operations, 1927–1948. Puckapunyal, Victoria: RAAC Memorial and Army Tank Museum. ISBN 1-876439-75-0.
  • Hopkins, Ronald (1993) [1978]. Australian Armour: A History of the Royal Australian Armoured Corps 1927–1972. Puckapunyal, Victoria: Royal Australian Armoured Corps Tank Museum. ISBN 0-642-99414-5.
  • Lambert, Zach (2012). "The Birth, Life and Death of the 1st Australian Armoured Division" (PDF). Australian Army Journal (Canberra, Australian Capital Territory: Land Warfare Studies Centre) IX (1): 89–103. ISSN 1448-2843.

External links