.338 Whisper

.338 Whisper
Type Rifle, subsonic
Place of origin USA
Production history
Designer J.D. Jones
Designed 1990s
Manufacturer SSK Industries
Specifications
Parent case 7 mm BR or .221 Fireball
Case type Rimless, bottleneck
Bullet diameter 8.59 mm (0.338 in)
Neck diameter 9.11 mm (0.359 in)
Shoulder diameter 11.60 mm (0.457 in)
Base diameter 11.83 mm (0.466 in)
Rim diameter 11.91 mm (0.469 in)
Rim thickness 1.20 mm (0.047 in)
Case length 38.08 mm (1.499 in)
Overall length 67.51 mm (2.658 in)
Ballistic performance
Bullet weight/type Velocity Energy
200 gr (13 g) BT 1,077 ft/s (328 m/s) 515 ft·lbf (698 J)
250 gr (16 g) BT 1,040 ft/s (320 m/s) 600 ft·lbf (810 J)
300 gr (19 g) BT 1,050 ft/s (320 m/s) 735 ft·lbf (997 J)
Test barrel length: 12"
Source(s): Cartridges of the World [1]

The .338 Whisper is a wildcat cartridge in the Whisper family, a group of cartridges developed in the early 1990s by J.D. Jones of SSK Industries.[1] Unlike the smaller caliber cartridges in the Whisper family, loads for the .338 Whisper are mainly limited to subsonic velocities.[2]

Versions

There are two versions of the .338 Whisper:

  1. The original .338 Whisper is based on the 7 mm Remington Bench Rest case, necked up (enlarged) to take a .338" bullet. As the 7mm Bench Rest and .308 Winchester cases share the same case head dimensions, conversion to .338 Whisper from a rifle previously chambered in .308 Winchester (or any cartridge based on the .308 Winchester case, such as .243 Winchester, .260 Remington, 7 mm-08 Remington, etc...) is a relatively simple task.[3]
  2. The second version (called .338 Whisper #2 by SSK) is based on the .221 Remington Fireball case, simplifying conversion of firearms chambered in 5.56x45mm or its commercial counterpart, .223 Remington.[3]

Subsonic

A subsonic cartridge is designed to fire its bullets at velocities slower than the speed of sound (1128 ft/s at 70 °F) to avoid the sonic crack caused by the bullet breaking the sound barrier which contributes in large part to the overall noise produced when using a firearm. Subsonic loads are often designed to avoid the turbulent transonic zone entirely. This allows the cartridge to be sound suppressed relatively easily. To ensure terminal performance at subsonic velocities, heavy bullets for the caliber (250-300 grains) (16.20-19.44g) are desirable. Only those .338 based on the 7mmBR case offer meaningful supersonic velocities.A full house load with fast powder can push a 165 grain Barnes bullet out the barrel at 2520fps. Another favourite pick for such an exercise would be the 180 grain Nosler Accubond or the 200 grain Nosler Ballistic tip traveling out at 2200fps-2350fps. Often found to be too explosive in high power rifles, at such moderate speeds the Ballistic Tips provide both expansion & penetration - this combination with excellent accurancy & a high ballistic coefficient. Of course the silent, subsonic loads should be loaded below the speed of sound with preferably the heaviest & longest bullet the .338 calibre has to offer. Currently this is the Berger Hybrid Open Tip Match (OTM)in 300 grains with a BC of 0.818 and a length of 1.820 inches.

Trademark

"Whisper" is a registered trademark of SSK Industries. In order to sidestep this branding (and/or any licensing fees required to use the "Whisper" name legally), other manufacturers tend to use different names for cartridges in the Whisper family. For example, .338 Murmer, .338 Phantom and .338 Benchrest. The .300 Whisper (the most popular cartridge of the family) is often called ".300 Fireball" or ".300-221".

See also

References

  1. ↑ 1.0 1.1
    • Barnes, Frank C. (2006) [1965]. Skinner, Stan, ed. Cartridges of the World (11th Edition ed.). Iola, WI, USA: Gun Digest Books. pp. 252, 284. ISBN 0-89689-297-2.
  2. ↑ User "Review" on the .338 ammo
  3. ↑ 3.0 3.1 http://www.reloadersnest.com/frontpage.asp?CaliberID=389 Information on the two different whisper versions

External links