.280 British

.280 British
Various .280 Ball Cartridges. Orange cased cartridge is made out of aluminium.
Type Rifle
Place of origin United Kingdom
Service history
Used by British
Production history
Designer British Army
Designed 1945
Specifications
Case type rimless bottlenecked [1]
Bullet diameter .284 in (7.2 mm)
Neck diameter .313 in (8.0 mm)
Shoulder diameter .448 in (11.4 mm)
Base diameter .470 in (11.9 mm)
Rim diameter .473 in (12.0 mm)
Rim thickness .049 in (1.2 mm)
Case length 1.71 in (43 mm)
Overall length 2.54 in (65 mm)
Ballistic performance
Bullet weight/type Velocity Energy
139 gr (9 g) Ball 2,545 ft/s (776 m/s) 1,980 ft·lbf (2,680 J)
140 gr (9 g) Ball
7 mm Mk 1Z		 2,549 ft/s (777 m/s) 2,004 ft·lbf (2,717 J)
Source(s): Cartridge of the World [2]

The .280 British was an experimental rimless bottlenecked intermediate rifle cartridge. It was later designated 7 mm MK1Z, and has also been known as 7 mm NATO, .280/30, .280 Enfield, .280 NATO, 7 mm FN Short, and 7×43mm. It was designed by the British Army in the late 1940s, with subsequent help from Fabrique Nationale in Belgium and the Canadian Army. The .280 British was tested in a variety of rifles and machine guns including the EM-2, Lee-Enfield, FN FAL, Bren, M1 Garand and Taden gun. Despite its success as an intermediate cartridge, the .280 British was not considered powerful enough by the U.S. Army and several variants of the .280 British were created in an attempt to appease the U.S. Army. However, the U.S. Army continued to reject these variants, ultimately adopting the 7.62×51mm NATO.

History

After the Second World War the British, having encountered the new 7.92 "Kurz" cartridge on the battlefield and noted its effectiveness, began a programme to replace the venerable .303 British cartridge which had been marked for replacement but had survived as a consequence of wartime pressures on British small arms development. The goal of the British designers was to create a cartridge that would replace all small arms in .303 calibre including the Bren, the No.4 Rifle and the Vickers medium machine gun with a cartridge suitable for a "light rifle". Thus the cartridge had to demonstrate ballistic performance equal to that of a full powered rifle round and yet exhibit as little recoil and blast as possible, so that it was controllable during rapid or automatic fire. A shorter cartridge producing lower recoil also enabled the weapon to be shorter and lighter, and hence easier to use. After extensive tests by the "Ideal Cartridge Panel" in 1945, the British decided upon two 7 mm cartridges – the .270 and the .276. Both designations reflected the measurement of the distance between the rifling lands in the cartridges' respective barrels; the .276 bullet's actual diameter was .284 inches (7.2 mm). In order to focus their efforts, the British ceased research on the .270 and concentrated their efforts on the .276. The .276 was later renamed the .280 British even though no dimensions were changed. Recoil of the .280 British cartridge was calculated to be a little under half of the .303 British. Long range performance actually surpassed that of the .303 British, and shooters reported that it was much more comfortable to fire with the reduced recoil and reduced blast. It seemed that the British designers had accomplished their goals, and proceeded to introduce the cartridge to their NATO allies.

.280/30 British sectioned cartridges. Bullet types from left to right: type C mild steel core, type B 140 gr ball and type S12 140 gr ball based on the 1913 pattern 7×57mm Mauser spitzer bullet that was chosen for the 7 mm MK1.[3]
From left to right: .30-06 Springfield, .280 British and 7.62×51 mm NATO cartridges.

Despite interest from the Belgians (FN would later produce the .280 British in quantity and help improve it) and the Canadians, the Americans were not at all interested, claiming they would not adopt a calibre under .30 inch, or with ballistics inferior to the then-standard .30-06 Springfield round. The British attempted to appease the Americans, first with small changes such as changing the rim diameter of the .280 British to the size of the .30-06 Springfield (resulting in the .280/30 cartridge which was produced in large numbers and is the basis of the dimensions listed to the right). Later, when the .280/30 was rejected by the Americans as being too weak with too great a drop in trajectory, the British and Belgians made large changes to the cartridge design. These resulted in several different variations; one was just a .280/30 with the bullet seated less deeply so more powder could be put in the case, another was a T65 cartridge case necked down to 7 mm. The different cartridges that the British and Belgians eventually came up with fired 140-grain (9.1 g) bullets at around 2,700 to 2,800 feet per second (820 to 850 m/s), but with a much greater blast and recoil than the .280/30, which defeated the design parameters of the initial .280 British venture. Unsatisfied with the U.S. Army's response on the issue, the British adopted the EM-2 and the .280/30 as their primary rifle and ammunition in 1951 with the .280/30 being re-designated as the "7 mm MK1Z". This effort was to be all in vain, as the Americans adopted the T65 (later to be designated the 7.62×51mm NATO).

A change of government meant that the 7 mm, EM-2 and Taden gun projects were abandoned soon afterwards by Winston Churchill, who returned as the prime minister and desired commonality between the NATO countries. Small amounts of .280 British ammunition were later produced during the 1960s for various small arms trials.

The .280 British concept would later prove to have been far ahead of its time, as the U.S. itself adopted an intermediate cartridge — 5.56×45mm NATO — by the end of the following decade. Soon after America's large-scale involvement in Vietnam commenced in 1965 the 5.56×45mm NATO ArmaLite AR-15 rifle, later standardised as the M16, was purchased in ever increasing numbers and by the late 1960s had displaced the 7.62×51mm NATO M14 rifle in combat units. After insisting on a .30 calibre round with full-power ballistics almost identical to those of the existing .30-06 Springfield, the U.S. then adopted the 5.56×45mm NATO intermediate cartridge, which demonstrated the emergence and dominance of intermediate cartridges on the battlefield (the other notable one being the 7.62×39mm AK-47 round). The adoption of the 7.62×51mm NATO round and the adaptation of the intermediate cartridge CETME (later developed into the Heckler & Koch G3) and FN FAL designs to fire it, produced rifles that were relatively longer and heavier and had greater recoil. The result was weapons that performed well as longer-range semi-automatic rifles, but were more cumbersome and only marginally controllable in automatic fire. These guns also had a higher training burden and were not well suited to soldiers of smaller stature, again due to the recoil. Coincidentally, in 2002 the Americans developed a military calibre intended for the M4 version of the M16 family called the 6.8 mm Remington SPC — with similar ballistic properties to the .280 British cartridge — which was intended to provide better ballistics than the 5.56×45mm NATO.

In the late 1960s, a version of the .280 British was created using a 6.25 mm bullet in a necked-down .280 British case. It was designed in response to experiments in the U.K. trying to find an ideal military small-arms round. Large caliber bullets were calculated to need more energy to penetrate various levels of body armor to inflict disabling wounds on soldiers. Out of several "optimum solutions" ranging from 4.5 mm to 7 mm, the 6.25 mm was the preferred solution. The 100 gr (6.5 g) bullet had a muzzle velocity of 2,680 ft/s (820 m/s) and 2,160 J (1,590 ft·lb) of muzzle energy. While the 7.62×51mm NATO required 700 joules (520 ft·lb) of force on impact to penetrate helmets and heavy body armor, the 6.25 mm required only 580 joules (430 ft·lb) of impact force to deliver the same penetration effects out to 600 m. It remained effective for a longer distance and produced recoil closer to that of the 5.56×45mm NATO.[4] However, it was not designed for very long range and its bullet was relatively light.[5] Testing of the 6.25×43mm was conducted from 1969 to 1971, when development ceased in favor of the smaller 4.85×49mm.[6]

Specifications

Name Bullet Diameter Case Length Rim Base Shoulder Neck OAL MV Bullet Weight
.280 British 7.214 mm (0.2840 in) 43.434 mm (1.7100 in) 12.01 mm (0.473 in) for the .280/30
11.633 mm (0.4580 in) for the .280 British 		- - - 64.516 mm (2.5400 in) Approx. 2,500 ft/s (760 m/s) with 140-grain (9.1 g) bullet 130–140 gr (8.4–9.1 g)

Types of bullets and colours of tips:

Note: Most cartridges have been observed with a purple annulus. Several experimental cartridge cases were made out of aluminium, in various colors including orange.

Known manufacturers:

Performance

The following comparisons are excerpts from a manual published by the "Small Arms Group Armament Design Establishment" from the Ministry of Supply:[7]

.280 British .303 British Mark VII .30-06 Spingfield
Bullet weight 139 gr or 9.0 g 174 gr or 11.3 g 166 gr or 10.8 g
Muzzle velocity 2,500 ft/s or 760 m/s 2,456 ft/s or 749 m/s 2,770 ft/s or 840 m/s
Timber penetration at 2,000 yards (1,829 m) 2.9 in or 74 mm 2.4 in or 61 mm 1.6 in or 41 mm
Timber penetration at 100 yards (91 m) 45 in or 114 cm 42 in or 107 cm 47 in or 119 cm
Range for penetration of airborne type steel helmet 1,000 yd or 914 m 900 yd or 823 m 1,600 yd or 1,463 m
Vertex height for 600-yard (549 m) range 3.3 ft or 101 cm 3.1 ft or 94 cm 3 ft or 91 cm
Recoil energy per round 7.4 ft·lbf or 10.0 J with EM-2 rifle 11 ft·lbf or 15 J with No.4 Rifle 14.4 ft·lbf or 19.5 J with M1 Garand

Variants

Comparable cartridges

From left to right: 6 mm SAW, 6.5 Grendel, 6.8 SPC, 7 mm Bench Rest, .280/30 British, 7 mm-08, 7 mm Second Optimum (Liviano), .276 Pedersen, .308×1.75", 7.62×51 NATO.

For .280 British:

For 7 mm HV, 7 mm Compromise, 7 mm Second Optimum:

See also

References

  1. ↑ The Handloader's Manual of Cartridge Conversions, Book by John J. Donnelly, Stoeger Publishing, 1987, ISBN 978-0-88317-269-8 p. 286
  2. ↑ Cartridges of the World 11th Edition, Book by Frank C. Barnes, Edited by Stan Skinner, Gun Digest Books, 2006, ISBN 0-89689-297-2 p. 349
  3. ↑ "British Military Cartridges .280/30 Enfield". Archived from the original on 2015-01-03. Retrieved 2014-12-31.
  4. ↑ ASSAULT RIFLES AND THEIR AMMUNITION: HISTORY AND PROSPECTS by Anthony G Williams
  5. ↑ The Case for a General-Purpose Rifle and Machine Gun Cartridge (GPC) by Anthony G Williams
  6. ↑ 6.25x43mm Experimental - Militarycartridges.nl
  7. ↑ Reprinted by Dugelby, Thomas B.. EM-2 Concept & Design; a rifle ahead of its time, Collector Grade Publications, 1980, p. 247

External links