Z code

From Wikipedia, the free encyclopedia

Z Code (like Q Code and X Code) is a set of codes used in CW, TTY and RTTY radio communication. Actually, there are different sets of Z-codes: one originally developed by Cable & Wireless Ltd., for commercial communications in the early days of wire and radio communications, another one independently developed by NATO forces later for military needs and use. The NATO Z Code is still in use today, and is published in the unclassified document ACP-131. There are other set of codes internally used by Russia's military and other operating agencies. The old C&W Z Codes are not widely used today.

Some Example Z Codes
Code Meaning Source
ZAL I am closing down (until...) due to.... C&W
ZAP Work...(1. Simplex; 2. Duplex; 3. Diplex; 4. Multiplex; 5. Single Sideband; 6. With automatic error correction system; 7. Without automatic error correction system. 8. With time and frequency diversity modem). C&W
ZBK Are you receiving my traffic clear? NATO
ZBK1 I am receiving your traffic clear NATO
ZBK2 I am receiving your traffic garbled NATO
ZBM2 Place a competent operator on this circuit C&W
ZLD2 I cannot transmit pictures. C&W
ZSF Switch off...(1. IFF; 2. IFF sets for 10 minutes in area denoted except for ships whose call signs follow). C&W
ZBW no. Change to backup frequency no. C&W
ZBZ(1-5). Measure of Printability (Where 1=Garbled/unreadable & 5=Perfect) C&W
ZUJ Stand by. NATO

A lot of the old C&W codes are derived from mnemonics (ZAL = (a)lter wave(l)ength, ZAP = (a)ck (p)lease, ZSF = (s)end (f)aster, etc.

See also

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.