Water cascade analysis

From Wikipedia, the free encyclopedia

Water cascade analysis (WCA) is a technique to calculate the minimum flowrate target for feedwater and wastewater for continuous water-using processes.[1]

Principle

It is a tabular and numerical alternative to the water surplus diagram in Water Pinch which can be used to identify opportunities for reduction in feedwater usage and the design of water distribution networks. The WCA is done in three steps, a global analysis of water distribution and consumption in the network, establishing baseline minimum water targets and redesign of the water network to achieve these targets.

History

WCA was first introduced by Manan, foo and Tan in 2004.[2] Since then, it has been widely used as a tool for water conservation in industrial process plants. A Time dependent water cascade analysis was presented later on.[3] A variation of the WCA is the gas cascade analysis (GCA).[4]

References

  1. ↑ Water cascade analysis technique for minimum flowrate targeting
  2. ↑ Manan, Z. A., Foo, C. Y. and Tan, Y. L. (2004). Targeting the Minimum Water Flowrate Using Water Cascade Analysis Technique, AIChE Journal, Volume 50, No. 12, 2004.
  3. ↑ Time dependent water cascade analysis
  4. ↑ Setting the minimum utility gas flowrate targets using cascade analysis

See also

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.