Voice-onset time

In phonetics, voice-onset time, commonly abbreviated VOT, is a feature of the production of stop consonants. It is defined as the length of time that passes between the release of a stop consonant and the onset of voicing, the vibration of the vocal folds, or, according to other authors, periodicity. Some authors allow negative values to mark voicing that begins during the period of articulatory closure for the consonant and continues in the release, for those unaspirated voiced stops in which there is no voicing present at the instant of articulatory closure.

A graphical representation of the VOT of voiced, tenuis, and aspirated stops

The concept of Voice-Onset Time can be traced back as far as in the 19th century, when Adjarian (1899: 119)^[1] studied the Armenian stops, and characterized them by the "relation qui existe entre deux moments : celui où la consonne éclate par l'effet de l'expulsion de l'air hors de la bouche, ou explosion, et celui où le larynx entre en vibration" (relation that exists between two moments: the one when the consonant bursts when the air is released out of the mouth, or explosion, and the one when larynx starts vibrating). However, the concept will become "popular" only in the 1960s, in a context described by Lin & Wang (2011: 514):^[2] "At that time, there was an ongoing debate about which phonetic attribute would allow voiced and voiceless stops to be effectively distinguished. For instance, voicing, aspiration, and articulatory force were some of the attributes being studied regularly. In English, "voicing" can successfully separate /b, d, ɡ/ from /p, t, k/ when stops are at word-medial positions, but this is not always true for word-initial stops. Strictly speaking, word-initial voiced stops /b, d, ɡ/ are only partially voiced, and sometimes are even voiceless." The concept of VOT will finally acquire its name in the famous study of Lisker & Abramson (1964).^[3]

However, a number of problems arose in defining VOT in some languages, and there is presently a call for reconsidering whether this speech synthesis parameter should be used to replace articulatory or aerodynamic model parameters which do not have these problems, and which have a stronger explanatory significance.^[4] As in the discussion below, any explication of VOT variations will invariably lead back to such aerodynamic and articulatory concepts, and there is no reason presented why VOT adds to an analysis, other than that, as an acoustic parameter, it may sometimes be easier to measure than an aerodynamic parameter (pressure or airflow) or an articulatory parameter (closure interval or the duration, extent and timing of a vocal fold abductory gesture).

Voice-Onset Timing spectrograms for English "die" and "tie". The voiceless gap between release and voicing is highlighted in red. Here the phoneme /t/ has a VOT of 95 ms., and /d/ has one of 25 ms.

• Simple unaspirated voiceless stops, sometimes called tenuis stops, have a voice-onset time at or near zero, meaning that the voicing of a following sonorant (such as a vowel) begins at or near to when the stop is released. (An offset of 15 ms or less on [t] and 30 ms or less on [k] is inaudible, and counts as tenuis.)

• Aspirated stops followed by a sonorant have a voice-onset time greater than this amount, called a positive VOT. The length of the VOT in such cases is a practical measure of aspiration: The longer the VOT, the stronger the aspiration. In Navajo, for example, which is strongly aspirated, the aspiration (and therefore the VOT) lasts twice as long as it does in English: 160ms vs. 80ms for [kʰ], and 45ms for [k]. Some languages have weaker aspiration than English. For velar stops, tenuis [k] typically has a VOT of 20-30 ms, weakly aspirated [k] of some 50-60 ms, moderately aspirated [kʰ] averages 80–90 ms, and anything much over 100 ms would be considered strong aspiration. (Another phonation, breathy voice, is commonly called voiced aspiration; in order for the VOT measure to apply to it, VOT needs to be understood as the onset of modal voicing. Of course, an aspirated consonant will not always be followed by a voiced sound, in which case VOT cannot be used to measure it.)

• Voiced stops have a voice-onset time noticeably less than zero, a negative VOT, meaning the vocal cords start vibrating before the stop is released. With a fully voiced stop, the VOT coincides with the onset of the stop; with a partially voiced stop, such as English [b, d, ɡ] in initial position, voicing begins sometime during the closure (occlusion) of the consonant.

Because neither aspiration nor voicing is absolute, with intermediate degrees of both, the relative terms fortis and lenis are often used to describe a binary opposition between a series of consonants with higher (more positive) VOT, defined as fortis, and a second series with lower (more negative) VOT, defined as lenis. Of course, being relative, what fortis and lenis mean in one language will not in general correspond to what they mean in another.

Voicing contrast applies to all types of consonants, but aspiration is generally only a feature of stops and affricates.

References

• Taehong Cho and Peter Ladefoged, "Variations and universals in VOT: Evidence from 18 languages". Journal of Phonetics vol. 27. 207-229. 1999.
• Angelika Braun, "VOT im 19. Jahrhundert oder "Die Wiederkehr des Gleichen"". Phonetica vol. 40. 323-327. 1983.

External links

• Buy a pie for the spy A description of the mechanism of voiced, tenuis (voiceless unaspirated), and (voiceless) aspirated stops in relation to voice-onset time