Vektor CP1

Vektor CP1
Vektor CP1
Type	Semi-automatic pistol
Place of origin	South Africa
Service history
In service	1996 - 2000
Used by	Mainly civilian customers - Some Law Enforcement (mainly in South Africa) and private Security operators
Production history
Manufacturer	Lyttleton Engineering Works South Africa
Produced	1996-2001
Variants	Vektor CP1 / Vektor CP1N
Specifications
Weight	1.58 lbs (720 g)
Length	177mm
Cartridge	9 mm
Caliber	9x19mm Parabellum, 9x21mm IMI, .40 S&W
Action	Single action, short recoil operation
Effective firing range	165 ft (50 m)
Feed system	Detachable box magazine, + 1 in chamber 10, 12, or 13-rounds - 9 mm
Sights	Iron sight

The Vektor СР1 was a semi-automatic pistol made in South Africa by Lyttleton Engineering Works (LIW) now Denel Land Systems, from 1996 to 2001.

The CP1 pistol was intended as a concealed carry weapon for Law Enforcement and civilian use. It has an unusual, streamlined design with a polymer frame and an even more unusual safety, located at the front of the trigger-guard.^[1] In several reviews it was characterized as being a radically designed gun that looks like something straight out of a science fiction movie. These reviews also state that it has no sharp edges, and is about as "snag-proof" as any combat gun can ever be, and because of its design it is a surprisingly comfortable gun to shoot, which makes it feel very ergonomic.^[2] The gun originally sold in the United States for a retail price of approximately $400. The pistol was also marketed in Italy, where it was chambered for the 9x21mm IMI cartridge.

The CP1 uses a gas-delayed blowback action with a gas cylinder located below the barrel. The trigger is a single action, internal hammer. A manual safety is located at the front of the trigger guard. To set on Safe, the button must be pressed rearward from the front; to set on Fire, the button must be pressed forward from inside the trigger guard. The pistol is also fitted with an automated trigger safety. Magazines are double stack; 10 & 12-round magazines are flush fit with the bottom of the grip, 13-round magazines have extended finger rests at the bottom.

LIW was developing a .40 S&W caliber version of the CP1, to be known as the CP1N. It is unknown if the CP1N was ever actually produced.

In October 2000 a recall notice was issued for the Vektor CP1, because a small percentage of them had issues with the internal safety mechanisms and, when dropped, could accidentally fire. The recall states that the loaded gun can discharge if bumped or dropped. Information accompanying recall notices stated that the gun should not be loaded under any circumstances; although some firearms experts and enthusiasts may deem such recall as unnecessary for the mentioned defect, Denel probably took such steps to prevent any accident that may result in a lawsuit, as the primary export market of the Vektor CP1 pistol were the United States. This recall ended promising sales in the USA, and terminated the life of this pistol on the market, although most of the CP1 pistols turned in from South African customers were indeed fixed and returned to their owners;^[3] inability to fix and return the defective pistols from foreign markets was probably the reason behind Vektor's decision to pay $500 to anyone who turned in their gun, and to put the CP1 pistol out of production in 2001.

It is estimated that approximately 2000 of the guns were sold in the United States prior to the recall.^[4] Most of that number were turned in, and the guns are now very rare in the United States. They are available in very limited numbers in South Africa and other countries.

See also

• Vektor SP1, another pistol by the same manufacturer

References