Vapor quality

From Wikipedia, the free encyclopedia

For inhalation of thermally treated plant material, e.g. tobacco or cannabis, see Vapou rizer. For the concept of availability of thermal energy, see exergy efficiency.

Thermodynamics

The classical Carnot heat engine
Book:Thermodynamics

Branches

Laws

Systems

State
Equation of state Ideal gas Real gas Phase / State of matter Equilibrium Control volume Instruments
Processes
Isobaric Isochoric Isothermal Adiabatic Isentropic Isenthalpic Quasistatic Polytropic Free expansion Reversibility Irreversibility Endoreversibility
Cycles
Heat engines Heat pumps Thermal efficiency

System properties

Functions of state (Conjugate variables in italics)
Property diagrams Intensive and extensive properties
Temperature / Entropy Introduction to entropy Pressure / Volume Chemical potential / Particle number Vapor quality Reduced properties
Process functions
Work Heat

Material properties

Specific heat capacity

$c=$

$T$	$\partial S$
$N$	$\partial T$

Compressibility

$\beta =-$

$1$	$\partial V$
$V$	$\partial p$

Thermal expansion

$\alpha =$

$1$	$\partial V$
$V$	$\partial T$

Property database

Equations

Potentials

Enthalpy
$H(S,p)=U+pV$

Helmholtz free energy
$A(T,V)=U-TS$

Gibbs free energy
$G(T,p)=H-TS$

History / Culture

Philosophy
Entropy and time Entropy and life Brownian ratchet Maxwell's demon Heat death paradox Loschmidt's paradox Synergetics
History
General Heat Entropy Gas laws "Perpetual motion" machines
Theories
Caloric theory Vis viva Theory of heat Mechanical equivalent of heat Motive power
Key publications
"An Experimental Enquiry Concerning ... Heat" "On the Equilibrium of Heterogeneous Substances" "Reflections on the Motive Power of Fire"
Timelines
Thermodynamics Heat engines
Art
Maxwell's thermodynamic surface
Education
Entropy as energy dispersal

Scientists

In thermodynamics, vapour quality is the mass fraction in a saturated mixture that is vapour;^[1] i.e. saturated vapour has a "quality" of 100%, and saturated liquid has a "quality" of 0%. Vapour quality is an intensive property which can be used in conjunction with other independent intensive properties to specify the thermodynamic state of the working fluid of a thermodynamic system. It has no meaning for substances which are not saturated mixtures (i.e., compressed liquids or superheated fluids).

Quality $\chi$ can be calculated by dividing the mass of the vapour by the mass of the total mixture:

$\chi ={\frac {m_{{vapour}}}{m_{{total}}}}$

where $m$ indicates mass.

Another definition used by chemical engineers defines quality (q) of a fluid as the fraction that is saturated liquid.^[2] By this definition, a saturated liquid has q = 0. A saturated vapour has q = 1.^[3]

Calculation

The above expression for vapour quality can be expressed as:

$\chi ={\frac {y-y_{f}}{y_{g}-y_{f}}}$ ,

where $y$ is equal to either specific enthalpy, specific entropy, specific volume or specific internal energy, $y_{f}$ is the value of the specific property of the substance in the liquid state while under saturated conditions, and $y_{{g}}-y_{{f}}$ is the value of the specific property of the substance in the gas state minus that of the liquid state.

Another expression of the same concept is:

$\chi ={\frac {m_{v}}{m_{l}+m_{v}}}$

where $m_{v}$ is the vapour mass and $m_{l}$ is the liquid mass.

Steam quality

The genesis of the idea of vapour quality was derived from the origins of thermodynamics, where an important application was the steam engine. Low quality steam would contain a high moisture percentage and therefore damage components more easily^{[citation needed]}. High quality steam would not corrode the steam engine. Steam engines use water vapour (steam) to drive pistons or turbines which create work. The quality of steam can be quantitatively described by steam quality (steam dryness), the proportion of saturated steam in a saturated water/steam mixture. I.e., a steam quality of 0 indicates 100% water while a steam quality of 1 (or 100%) indicates 100% steam.

The quality of steam on which steam whistles are blown is variable and may affect frequency. Steam quality determines the velocity of sound, which declines with decreasing dryness due to the inertia of the liquid phase. Also, the specific volume of steam for a given temperature decreases with decreasing dryness.^[4]^[5]

Steam quality is very useful in determining enthalpy of saturated water/steam mixtures since the enthalpy of steam (gaseous state) is many orders of magnitude higher than enthalpy of water (liquid state).

References

↑ Cengel, Yunus A.; Boles, Michael A. (2002). Thermodynamics: an engineering approach. Boston: McGraw-Hill. p. 79. ISBN 0-07-121688-X.
↑ Wankat, Philip C. (1988). Equilibrium Staged Separations. Upper Saddle River, New Jersey: Prentice Hall. pp. 119–121. ISBN 0-13-500968-5.
↑ Perry's Chemical Engineers' Handbook (7th Edition), p 13-29
↑ Soo, Shao L. (1989). Particulates and Continuum: A Multiphase Fluid Dynamics. CRC Press.
↑ Menon, E. Sashi. (2005). Piping Calculations Manual. New York: McGraw-Hill.

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.