Valid Logic Systems

From Wikipedia, the free encyclopedia

Valid Logic Systems was one of the first commercial electronic design automation (EDA) companies. It was founded in the early 1980s,[1] along with Daisy Systems Corporation and Mentor Graphics, collectively known as DMV.

Initially, Valid built both hardware and software, for schematic capture, logic simulation, static timing analysis, and packaging. Much of the initial software base derived from SCALD ("Structured Computer-Aided Logic Design"), a set of tools developed to support the design of the S-1 supercomputer at Lawrence Livermore National Laboratories.[2] Later, Valid expanded into IC design tools and into printed circuit board layout.

At first, Valid ran schematic capture on a proprietary UNIX workstation, the SCALDSystem, with static timing analysis, simulation, and packaging running on a VAX or IBM-compatible mainframe. Within a few years, the (still proprietary) workstations were powerful enough to run all of the software. However, by the mid-1980s, general purpose workstations were powerful enough, significantly cheaper, and had given rise to a significant sector of the software industry, making them a better value on several counts. Companies such as Mentor Graphics and Cadence Design Systems took this path, and sold software only to run on standard workstations. However, the president of Valid, Jerry A. Anderson, felt that Wall Street would never adequately value a company that did not produce hardware, and insisted that the company's products continue to be bundled.[citation needed] Eventually he was overruled by the board, but by then, considerable time had been lost to competitors.[citation needed] By 1990, almost all Valid software was running on general purpose workstations, primarily those from Sun Microsystems.

The engineering founders of Valid were L. Curtis Widdoes,[3] Tom McWilliams[4] and Jeff Rubin,[5] all of whom had worked on the S-1 supercomputer project at Livermore Labs.

Valid acquired several companies such as Telesis (PCB layout),[6] Analog Design Tools,[7] and Calma (IC layout). In turn, Valid was acquired by Cadence Design Systems in the early 90s.[8]

References

  1. ↑ Kenneth N. Gilpin; Todd S. Purdum (November 14, 1985). "BUSINESS PEOPLE; Intel Manager Becomes President of Valid Logic". New York Times. Retrieved 2013-10-17. 
  2. ↑ McWilliams, T.M.; Widdoes, L.C. Jr.; Wood, L.L. (1977-09-30). Advanced digital processor technology base development for Navy applications: the S-1 project. Lawrence Livermore Laboratory. 
  3. ↑ Donald MacKenzie (1998). Knowing machines: essays on technical change. MIT Press. ISBN 0-262-63188-1. 
  4. ↑ Timothy Prickett Morgan (13 April 2009). "Big-iron brains powers Schooner appliance power - Putting a ding in server size". Servers. The Register. Retrieved 2011-09-22. 
  5. ↑ Electronic Business 9. Cahners. 1983. p. 231. 
  6. ↑ "Business: Valid Logic to Buy Firm". San Jose Mercury News. February 6, 1987. p. 13E. Retrieved 2013-10-17. 
  7. ↑ "Company News: Valid Logic to Buy Analog Design". New York Times. November 23, 1988. Retrieved 2013-10-17. 
  8. ↑ "Business: Cadence to Buy Rival Valid". San Jose Mercury News. October 3, 1991. p. 1E. Retrieved 2013-10-17. 
This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.