Uniformat

From Wikipedia, the free encyclopedia

UniFormat is a standard for classifying building specifications, cost estimating, and cost analysis in the U.S. and Canada. The elements are major components common to most buildings. The system can be used to provide consistency in the economic evaluation of building projects. It was developed through an industry and government consensus and has been widely accepted as an ASTM standard.[1]

History

Hanscomb Associates, a cost consultant, developed a system called MASTERCOST in 1973 for the American Institute of Architects (AIA). The U.S. General Services Administration (GSA), which is responsible for government buildings, was also developing a system. The AIA and GSA agreed on a system and named it UNIFORMAT. The AIA included it in their practice on construction management, and the GSA included it their project estimating requirements. In 1989, ASTM International began developing a standard for classifying building elements, based on the UNIFORMAT. It was renamed to UNIFORMAT II.[2] In 1995, the Construction Specifications Institute (CSI) and Construction Specifications Canada (CSC) began to revise Uniformat. UniFormat is now a trademark of CSI and CSC and was most recently published in 2010.[3]

A new strategy to classify the built environment, named OmniClass,[4] incorporates the elemental building classification in its Table 21 Elements. The numbering system is changed in OmniClass.

UniFormat level 1 categories

  • A SUBSTRUCTURE
  • B SHELL
  • C INTERIORS
  • D SERVICES
  • E EQUIPMENT AND FURNISHINGS
  • F SPECIAL CONSTRUCTION AND DEMOLITION
  • G BUILDING SITEWORK

UniFormat levels 2 and 3 categories

An example of how the numbering system expands to provide additional detail below level 1 is shown for A SUBSTRUCTURE

  A10 Foundations
       A1010 Standard Foundations
       A1020 Special Foundations
       A1030 Slab on Grade
  A20 Basement Construction
       A2010 Basement Excavation
       A2020 Basement Walls

References

  1. ↑ Robert P. Charette, Harold E. Marshall, "UNIFORMAT II Elemental Classification for Building Specifications, Cost Estimating, and Analysis" U.S. Department of Commerce, Technology Administration, National Institute of Standards and Technology, NISTIR 6389, October 1999
  2. ↑ Robert P. Charette, Harold E. Marshall, "UNIFORMAT II Elemental Classification for Building Specifications, Cost Estimating, and Analysis" U.S. Department of Commerce, Technology Administration, National Institute of Standards and Technology, NISTIR 6389, October 1999
  3. ↑ "Uniformat," Construction Specifications Institute, http://www.csinet.org/uniformat
  4. ↑ http://www.omniclass.org/

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.