Uneven bars

From Wikipedia, the free encyclopedia
Qatari Gymnast Shaden Wahdan
A gymnast performing a Giant Swing
Lineup for practice

The uneven bars or asymmetric bars is an artistic gymnastics apparatus. It is used only by female gymnasts. It is made of a steel frame. The bars are made of fiberglass with wood coating, or less commonly wood.[1] The English abbreviation for the event in gymnastics scoring is UB or AB, and the apparatus and event are often referred to simply as "bars". The bars are placed at different heights, allowing the gymnast to jump from bar to bar.

The apparatus

Uneven bars used in international gymnastics competitions has to conform to the guidelines and specifications set forth by the International Gymnastics Federation Apparatus Norms brochure. Several companies manufacture and sell bars, including AAI (USA), Jannsen and Fritsen (Europe) and Acromat (Australia).

Gymnasts will often use a single bar to practice skills on the bar, mostly for safety and for ease of spotting.

Dimensions

Measurements of the bars are provided by the Fédération Internationale de Gymnastique (FIG) in the Apparatus Norms brochure.

  • Height:
    • upper bar: 250 centimetres (8.2 ft)[1]
    • lower bar: 170 centimetres (5.6 ft) [1]
  • Diameter of bar: 4 centimetres (0.13 ft) [2]
  • Length of the bars: 240 centimetres (7.9 ft) [2]
  • Diagonal distance between the two bars: 130 centimetres (4.3 ft)180 centimetres (5.9 ft) (adjustable) [2]

Routines

Evolution

The uneven bars apparatus originally consisted of women's parallel bars set to different heights. Consequently, the bars were very close together, and gymnasts could transition from one to the other with little difficulty. Routines of the early 1950s chiefly consisted of simple circles, kips, and static balance elements and holds. In the late 1950s the trend shifted toward fluid motion, and gymnasts began to perform routines composed of more difficult circles, kips, beats (bouncing the body off the low bar while hanging from the high bar), wraps (wrapping the body around the low bar while hanging from the high bar) and transitions. Release moves also began to come into play, although they were almost entirely limited to transitions between the low and high bars. In the late 1960s/early 1970s, companies began manufacturing uneven bars as a separate specific apparatus. The design was changed slightly to allow the bars to be adjustable, with tension cables that held the apparatus to the floor. As a result of this change, coaches could set the bars farther apart. Additionally, the circumference of the bars themselves decreased, allowing gymnasts to grasp and swing from them with greater ease.

As other events in gymnastics increased in difficulty, so did the uneven bars. Gymnasts and coaches began experimenting with elements, attempting more challenging dismounts, and adapting moves from men's horizontal bar. In 1972 Olga Korbut pioneered the Korbut Flip, the first high bar salto release move. Nadia Comăneci continued the trend with her original Comaneci salto at the 1976 Olympics and advanced handstand elements four years later. The giant swing, the staple of high bar in men's artistic gymnastics (MAG), was also adopted into the women's Code of Points, and quickly became a basic uneven bars skill.

By the mid 1980s, routines had become so based on swing and release moves that the bars were moved even farther apart. The distance between bars increased even more as gymnasts developed difficult transition elements that required space, such as the Pak salto.

Of all the apparatus in women's artistic gymnastics (WAG), uneven bars is probably the one that has seen the most radical changes. Most elements from 1950s and 60s bars routines, such as the Hecht dismount and the Radolcha somersault, are now completely obsolete; others, such as the once-traditional beats and wraps, are impossible given the current diagonal separation between bars; and still others, such as static holds and the Korbut Flip, are not permitted under the current Code of Points. In USAG levels 1-6, everyone in the same level performs the same compulsory routine. In levels 7 through Elite, gymnasts make up their own routines within specific requirements.

In Gymnastics Australia levels 1-3 gymnasts have a choice of three routines with different difficulty. In levels 4-6 gymnasts have the option to include more difficult skills in their routines for bonus points. In levels 7 to Elite gymnasts make up their own routines within set guidelines.

International level routines

A routine on the uneven bars must consist of:[3]

  • Flight element from high bar to low bar and vice versa
  • Flight element on the same bar
  • At least two different grips, and a close bar circle element
  • Non flight with a turn on the bar, for example turning handstands
  • Dismount

Scoring and rules

Judges score routines based on difficulty, form, technique and composition. Deductions are taken for execution errors, poor form, falls, pauses, "empty" swings (extra swings that do not lead into another skill), steps on the dismount, and other mistakes. Falls incur an automatic deduction of 1 full point in the 2009 FIG CoP. Also, if the gymnast hits the low bar with her foot (as Beth Tweddle did at the 2008 Olympics bars qualifications, and Viktoria Komova did at the 2012 Olympics bars apparatus finals), a deduction of 0.5 will occur.[4]

Apparatus specific rules

Youna Dufournet preparing the bars with chalk

Gymnasts are permitted to tape their hands or use grips or hand guards on bars. Their coaches are also permitted to apply chalk and/or water to the bars to ensure gymnasts don't slip off.[2]

Unlike high bar and rings in MAG, gymnasts may not be lifted to the uneven bars to begin their routines. They may mount the apparatus with either a simple or a difficult skill, on either the high or low bar; running mounts and springboards are permitted.[3]

Once the routine has started, the coach may not physically interfere with the athlete in any way, however he or she is permitted to stand on the mat during release moves and dismounts. If the gymnast falls on one of these skills, her coach is allowed to catch her or break her fall; the coach is also allowed to lift her back to the high bar to continue her routine. If a springboard has been used for the mount, the coach is allowed to quickly step in and remove it so that it does not impede the routine.[5]

If a gymnast falls from the apparatus, she has 30 seconds to re-mount. Within this time limit, she is allowed to readjust her grips or chalk her hands again, if necessary. However, if she does not return to the bars within 30 seconds, she is not permitted to continue her routine.[3]

References

  1. 1.0 1.1 1.2 "Gymnastics Internationals Federation: About WAG". FIG. Retrieved 2009-10-02. 
  2. 2.0 2.1 2.2 2.3 "Apparatus Norms" (PDF). FIG. p. II/47. Retrieved 2009-10-02. 
  3. 3.0 3.1 3.2 "WAG Code of Points 2009-2012" (PDF). FIG. p. 24. Retrieved 2009-10-02. 
  4. "WAG Code of Points 2009-2012" (PDF). FIG. p. 15. Retrieved 2009-10-02. 
  5. "WAG Code of Points 2009-2012" (PDF). FIG. p. 3. Retrieved 2009-10-02. 

External links and sources

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.