Turbosteamer

From Wikipedia, the free encyclopedia

A turbosteamer is a term used by BMW to describe a combined cycle engine. It uses a steam engine to convert waste heat energy from an internal combustion engine into supplemental power for the vehicle. The turbosteamer device is affixed to the exhaust and cooling system. It salvages the heat wasted in the exhaust and radiator (as much as 80% of heat energy) and uses a steam piston or turbine to relay that power to the crankshaft. The steam circuit produces 14 hp (10 kW) and 15 ft·lbf (20 N·m) of torque at peak (for a 1.8 Straight-4 engine), yielding an estimated 15% gain in fuel efficiency. Unlike gas-electric hybrids, these gains increase at higher, steadier speeds.[1]

BMW has been the pioneer of this concept as early as 2000 under the direction of Dr. Raymond Freymann, and while they are designing this system to fit to most current BMW models, the technology is not expected to reach production until 2015 onward, based on 2005 estimates.

See also

Publications

  • R. Freymann, W. Strobl, A. Obieglo: The Turbosteamer: A System Introducing the Principle of Cogeneration in Automotive Applications. Motortechnische Zeitschrift, MTZ 05/2008 Jahrgang 69, pp.404-412.

References

  1. ↑ BMW TurboSteamer

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.