Trident loop
Trident loop | |
---|---|
Category | Loop |
Related | Ashley's bend, Figure-eight knot, Zeppelin loop |
Typical use | Forming fixed loop in end of a line |
The Trident loop is a fixed loop knot. It can jam when heavily loaded. It was proposed as a replacement for the Figure-of-eight loop for use in climbing by Robert M. Wolfe, MD, who developed it as a loop form of Ashley's bend. While some tests indicate its strength lies somewhere between the weaker Bowline and stronger Figure-of-eight loop, the Trident loop shows exceptional resistance to slipping in shock-loading tests.[1]
Tying
-
1. Start with a rope end.
-
2. Start an overhand knot, leaving enough rope for the loop and the rest of the knot.
-
3. Complete the overhand knot.
-
4. Form the loop by wrapping the working end around, and then form a bight in the working end.
-
5. Feed the bight through the overhand knot.
-
6. Wrap the remaining working end around the back of the knot.
-
7. Feed the working end up through the bight.
-
8. Tighten. This is the completed loop.
See also
References
- ↑ Geoffrey Budworth, The Complete Book of Knots (London: Octopus, 1997), 94.